本文介绍如何通过7个简单步骤来升级Cisco交换机或路由器的IOS软件。确保在升级过程中能够直接访问设备，并使用控制台电缆连接到交换机。虽然这些步骤适用于交换机和路由器,但示例将展示如何为Cisco Catalyst交换机升级IOS。
Anytime Cisco releases a new IOS p_w_picpath for its network switch (or router), it is recommended that you upgrade it.
This article explains 7 easy steps to upgrade IOS p_w_picpath on a cisco switch or router.
Since you’ll be upgrading the IOS p_w_picpath, make sure you have physical access to the switch and you are in front of it. Use a console cable to connect to the switch.
Please note that the steps given below will be similar to both switches and routers. However this examples shows how to upgrade ios p_w_picpath on a cisco catalyst switch.
To view the complete article click the following link:
http://www.thegeekstuff.com/2011/06/upgrade-cisco-ios-p_w_picpath/
转载于:https://blog.51cto.com/10500561/1731087
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
