How to install virtual machine using PXE

2019独角兽企业重金招聘Python工程师标准>>>

Assume we already have a running PXE. Its IP is 10.67.0.10. Proceed as below:

• edit network "default" virsh net-edit default add the "bootp" entry in "dhcp" section.

<network>
  <name>default</name>
  <uuid>93af5549-59bd-4bd1-a22f-1c3da65e39f1</uuid>
  <forward mode='nat'/>
  <bridge name='virbr0' stp='on' delay='0'/>
  <mac address='52:54:00:c2:1d:e2'/>
  <ip address='192.168.122.1' netmask='255.255.255.0'>
    <dhcp>
      <range start='192.168.122.2' end='192.168.122.254'/>
      <bootp file='pxelinux.0' server='10.67.0.10'/>
    </dhcp>
  </ip>
</network>

• restart the "default" network

# virsh net-destroy default
Network default destroyed
# virsh net-start default
Network default started

Don't forget to enable network on "boot menu".

转载于:https://my.oschina.net/u/2475751/blog/1518568