wget http://cdn.mysql.com//Downloads/MySQL-5.7/mysql-5.7.17-linux-glibc2.5-x86_64.tar.gz


1、groupadd mysql      ## 添加一个mysql组

2、useradd -r -g mysql mysql    ## 添加一个用户

3、解压缩下载的包，tar -xzvf /data/software/mysql-5.7.13-linux-glibc2.5-x86_64.tar.gz

4、然后 mv 解压后的包  mysql   ##相当于重命名

5、 chown -R mysql:mysql ./   ##进入mysql包中， 给这个包授权 给mysql

6、bin/mysqld --initialize --user=mysql --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data     ##进入mysql文件名  basedir 为mysql 的路径， datadir 为mysql的 data 包，里面存放着mysql自己的包， 如user

    重要：此处需要注意记录生成的临时密码，如上文：YLi>7ecpe;YP

7、bin/mysql_ssl_rsa_setup  --datadir=/usr/local/mysql/data           

8、进入mysql    support-files

9、cp my-default.cnf /etc/my.cnf

10、cp mysql.server /etc/init.d/mysql

11、vim /etc/init.d/mysql             ##修改basedir=  自己的路径     修改datadir= 自己的路径

12、bin/mysqld_safe --user=mysql &     ## 启动mysql

13、bin/mysql --user=root –p   

14、 输入临时密码

15、

　　set password=password('A123456');

16、grant all privileges on *.* to root@'%' identified by 'A123456';

17、flush privileges;

18、use mysql;

19、select host,user from user;


=================

Oracle provides a set of binary distributions of MySQL. These include generic binary distributions in the form of compressed tar files (files with a .tar.gzextension) for a number of platforms, and binaries in platform-specific package formats for selected platforms.

This section covers the installation of MySQL from a compressed tar file binary distribution. For other platform-specific package formats, see the other platform-specific sections. For example, for Windows distributions, see Section 2.3, “Installing MySQL on Microsoft Windows”.

To obtain MySQL, see Section 2.1.2, “How to Get MySQL”.

MySQL compressed tar file binary distributions have names of the form mysql-VERSION-OS.tar.gz, where VERSION is a number (for example, 5.7.18), and OS indicates the type of operating system for which the distribution is intended (for example, pc-linux-i686 or winx64).

Warning

If you have previously installed MySQL using your operating system native package management system, such as yum or apt-get, you may experience problems installing using a native binary. Make sure your previous MySQL installation has been removed entirely (using your package management system), and that any additional files, such as old versions of your data files, have also been removed. You should also check for configuration files such as /etc/my.cnf or the /etc/mysql directory and delete them.

For information about replacing third-party packages with official MySQL packages, see the related Apt guide or Yum guide.

Warning

MySQL has a dependency on the libaio library. Data directory initialization and subsequent server startup steps will fail if this library is not installed locally. If necessary, install it using the appropriate package manager. For example, on Yum-based systems:

shell> yum search libaio  # search for info
shell> yum install libaio # install library

Or, on APT-based systems:

shell> apt-cache search libaio # search for info
shell> apt-get install libaio1 # install library

If you run into problems and need to file a bug report, please use the instructions in Section 1.7, “How to Report Bugs or Problems”.

On Unix, to install a compressed tar file binary distribution, unpack it at the installation location you choose (typically /usr/local/mysql). This creates the directories shown in the following table.

Table 2.3 MySQL Installation Layout for Generic Unix/Linux Binary Package

DirectoryContents of Directory
bin, scriptsmysqld server, client and utility programs
dataLog files, databases
docsMySQL manual in Info format
manUnix manual pages
includeInclude (header) files
libLibraries
shareMiscellaneous support files, including error messages, sample configuration files, SQL for database installation


Debug versions of the mysqld binary are available as mysqld-debug. To compile your own debug version of MySQL from a source distribution, use the appropriate configuration options to enable debugging support. See Section 2.9, “Installing MySQL from Source”.

To install and use a MySQL binary distribution, the command sequence looks like this:

shell> groupadd mysqlshell> useradd -r -g mysql -s /bin/false mysqlshell> cd /usr/localshell> tar zxvf /path/to/mysql-VERSION-OS.tar.gzshell> ln -s full-path-to-mysql-VERSION-OS mysqlshell> cd mysqlshell> mkdir mysql-filesshell> chmod 750 mysql-filesshell> chown -R mysql .shell> chgrp -R mysql .shell> scripts/mysql_install_db --user=mysql# MySQL 5.7.0 to 5.7.4
shell> bin/mysql_install_db --user=mysql    # MySQL 5.7.5
shell> bin/mysqld --initialize --user=mysql # MySQL 5.7.6 and up
shell> bin/mysql_ssl_rsa_setup              # MySQL 5.7.6 and up
shell> chown -R root .shell> chown -R mysql data mysql-filesshell> bin/mysqld_safe --user=mysql &# Next command is optional
shell> cp support-files/mysql.server /etc/init.d/mysql.server

Note

This procedure assumes that you have root (administrator) access to your system. Alternatively, you can prefix each command using the sudo (Linux) or pfexec (OpenSolaris) command.

Note

Before MySQL 5.7.4, the procedure does not assign passwords to MySQL accounts. To do so, use the instructions in Section 2.10.4, “Securing the Initial MySQL Accounts”.

The mysql-files directory provides a convenient location to use as the value of the secure_file_priv system variable that limits import/export operations to a specific directory. See Section 6.1.5, “Server System Variables”.

Before MySQL 5.7.5, mysql_install_db creates a default option file named my.cnf in the base installation directory. This file is created from a template included in the distribution package named my-default.cnf. For more information, see Section 6.1.2, “Server Configuration Defaults”.

Note

As of MySQL 5.7.18, my-default.cnf is no longer included in or installed by distribution packages.

A more detailed version of the preceding description for installing a binary distribution follows.

Create a mysql User and Group

If your system does not already have a user and group to use for running mysqld, you may need to create one. The following commands add the mysqlgroup and the mysql user. You might want to call the user and group something else instead of mysql. If so, substitute the appropriate name in the following instructions. The syntax for useradd and groupadd may differ slightly on different versions of Unix, or they may have different names such asadduser and addgroup.

shell> groupadd mysqlshell> useradd -r -g mysql -s /bin/false mysql

Note

Because the user is required only for ownership purposes, not login purposes, the useradd command uses the -r and -s /bin/false options to create a user that does not have login permissions to your server host. Omit these options if your useradddoes not support them.

Obtain and Unpack the Distribution

Pick the directory under which you want to unpack the distribution and change location into it. The example here unpacks the distribution under /usr/local. The instructions, therefore, assume that you have permission to create files and directories in /usr/local. If that directory is protected, you must perform the installation as root.

shell> cd /usr/local

Obtain a distribution file using the instructions in Section 2.1.2, “How to Get MySQL”. For a given release, binary distributions for all platforms are built from the same MySQL source distribution.

Unpack the distribution, which creates the installation directory. tar can uncompress and unpack the distribution if it has z option support:

shell> tar zxvf /path/to/mysql-VERSION-OS.tar.gz

The tar command creates a directory named mysql-VERSION-OS.

To install MySQL from a compressed tar file binary distribution, your system must have GNU gunzip to uncompress the distribution and a reasonable tarto unpack it. If your tar program supports the z option, it can both uncompress and unpack the file.

GNU tar is known to work. The standard tar provided with some operating systems is not able to unpack the long file names in the MySQL distribution. You should download and install GNU tar, or if available, use a preinstalled version of GNU tar. Usually this is available as gnutar, gtar, or as tar within a GNU or Free Software directory, such as /usr/sfw/bin or /usr/local/bin. GNU tar is available from http://www.gnu.org/software/tar/.

If your tar does not have z option support, use gunzip to unpack the distribution and tar to unpack it. Replace the preceding tar command with the following alternative command to uncompress and extract the distribution:

shell> gunzip < /path/to/mysql-VERSION-OS.tar.gz | tar xvf -

Next, create a symbolic link to the installation directory created by tar:

shell> ln -s full-path-to-mysql-VERSION-OS mysql


The ln command makes a symbolic link to the installation directory. This enables you to refer more easily to it as /usr/local/mysql. To avoid having to type the path name of client programs always when you are working with MySQL, you can add the /usr/local/mysql/bin directory to your PATHvariable:

shell> export PATH=$PATH:/usr/local/mysql/bin


Perform Postinstallation Setup

The remainder of the installation process involves setting distribution ownership and access permissions, initializing the data directory, starting the MySQL server, and setting up the configuration file. For instructions, see Section 2.10, “Postinstallation Setup and Testing”.


转自：http://dev.mysql.com/doc/refman/5.7/en/binary-installation.html#binary-installation-layout