Could not open device at /dev/ipmi0 or /dev/ipmi/0

最新推荐文章于 2024-07-25 05:58:27 发布
转载 最新推荐文章于 2024-07-25 05:58:27 发布 · 4k 阅读 · 3 ·
CC 4.0 BY-SA版权
原文链接：http://blog.51cto.com/xiaoahehe/2356550

当使用ipmitool命令时遇到'Could not open device'错误,需要手动加载ipmi_watchdog,ipmi_poweroff及ipmi_devintf三个内核模块以确保命令正常执行。

执行ipmitool命令时提示信息Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory

需要加载以下三个模块

sudo modprobe ipmi_watchdog
sudo modprobe ipmi_poweroff
sudo modprobe ipmi_devintf

转载于:https://blog.51cto.com/xiaoahehe/2356550

unrxlib_275_u_1_0_13
05-10
Unofficial version Rx library for Delphi 2005/2006/2007/2009/2010/XE/XE2/XE3/XE4/XE5/XE6 DISCLAIMER: * This software is provided "as is" and is without warranty of any kind. The author(s) of this software does not warrant, guarantee or make any representations regarding the use or results of use of this software in terms of reliability, accuracy or fitness for purpose. You assume the entire risk of direct or indirect, consequential or inconsequential results from the correct or incorrect usage of this software even if the author(s) has been informed of the possibilities of such damage. Neither the author(s) nor anybody connected to this software in any way can assume any responsibility. * All rights held by the author(s) or owner(s) of units or documents. _______________________________________________________________________________ Update 1.13 1/ Update for Delphi XE6 _______________________________________________________________________________ Update 1.12 1/ Update for Delphi XE5 2/ New component TRxPanel added _______________________________________________________________________________ Update 1.11 1/ Update for Delphi XE4 _______________________________________________________________________________ Update 1.10 1/ Update for Delphi XE3 _______________________________________________________________________________ Update 1.09 1/ Delphi package source actualization 2/ Delphi 6 conditional corections 3/ TRxFindFiles support class added 4/ Corrections for default (ENG) lang. resource _______________________________________________________________________________ Update 1.08 1/ file case name unit corrections. 2/ only one language file can be used in your applications like: a) in Rx.inc activate {$DEFINE _LNG_ONE_}. b) activate yours own language in new include RxLangDef.inc like {$DEFINE RXLANG_Cze}. note: Languages different from English locates in utf-8 files, may be editor problem for lower version Delphi than 2005. c) in your project use global conditional define like RXLANG_MYLANG (it activate your lang file only). d) rebuild your application, it will be smaller with one your language mutation for RxLibrary only. 3/ repair malfunction of TColor property (big thanks to Remy Lebeau). 4/ many new constant color names added into module RxColors (+ 229 named constant). 5/ new component TRxThread added for better access. 6/ repair malfunction of property caption editor. 7/ new components TRxAnimBitBtn, TRxAnimSpeedButton added. 8/ repair malfunction with styles in TRxProgress. 9/ refresh code in TRxDBGridSorter. 10/ adopted 20 function utilities by Alexey Popov into module RxProps. 11/ activate Align property in TRxSpinButton. 12/ rename parameter Name to AName in define event TExecOpenDialogEvent, because occur names conflict. 13/ repair conflict in string property in module RxTranslate for unicodes. 14/ some functions added into module RxVerInf for better work with versions. Note for users Delphi 5/6/7: ---------------------------- RxLibrary is not directly designed for this Delphi versions. When you will want compile source code in this versions of Delphi, you have to open all units contain form (*.dfm) and resave it for resource compatibility (crash prevent IDE) before rebuild and install into IDE. Some functionality will be lost. Note for users Delphi XE2 (64 bit.ver): --------------------------------------- This source code is 64 bit ready but untested. BDE packs must be removed from 64 bit project as unsuported technology. Note for users CBuilder: ------------------------ This source code is CBuilder (2006/2007) ready but uncomplete and untested yet. Releases February 29, 2012 _______________________________________________________________________________ Update 1.07 1/ Update all packages in unit scope. 2/ Change namespace in RxViewer unit for XE2. _______________________________________________________________________________ Update 1.06 1/ repair malfunction of TFormStorage under Unicode Delphi. 2/ update packages file for Delphi 2005 - XE. 3/ update package for Delphi XE2 32 bit. _______________________________________________________________________________ Update 1.05 1/ better compatibility with Delphi 2009. 2/ new adopted component for view any supported files. 3/ convert dfm files to text. _______________________________________________________________________________ Update 1.04 Updated: 1/ small mistake in RxDBCtrl.pas (wrong show DBGrid). 2/ activate tables in general RxDemo. 3/ replacement deprecated FileAge() in RxFileUtils. _______________________________________________________________________________ The initial release(s) no included
Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory
热门推荐
xinqidian_xiao的博客
06-26 2万+
ipmitool使用报错处理Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory解决办法：需要加载相关模块查看先关模块是否加载（可以看出模块未加载）#lsmod |grep ^ipmi加载以下模块# modprobe ipmi_watchdog# modprob...
【报错ipmitool】Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or di
qq_39057568的博客
07-03 5913
dmidecode |grep -i ipmi 输出为空，说明没有IPMI，那别试了，没用的；
执行ipmitool命令的时候提示“Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such fil
荣 的专栏
07-25 3132
执行ipmitool命令的时候提示“
执行ipmitool命令的时候提示:Could not open device at /dev/ipmi0...
运维仙人
03-02 1万+
在这里插入代码片` [root@ ~]# yum install ipmi* Loaded plugins: langpacks, product-id, search-disabled-repos, subscription-manager This system is not registered with an entitlement server. You can use subscrip...
ipmitool启动报错"Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0
海绵汽水的博客
01-15 1万+
先查看lsmod |grep ipmi [root@localhost ~]# modprobe ipmi_watchdog [root@localhost ~]# modprobe ipmi_poweroff [root@localhost ~]# modprobe ipmi_devintf [root@localhost ~]# modprobe ipmi_si [root@loca...
ubuntu 无法使用ipmitool Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory
最新发布
09-16
我们正在解决Ubuntu系统中使用ipmitool时出现的错误：Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory。 根据引用[2]，原因可能是主板没有配置IPMI，或者IPMI...
root@wangdonghao:~# ipmitool Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: 没有那个文件或目录
05-31
如果您在运行 `ipmitool` 命令时遇到了 `Could not open device` 的错误，这可能是因为在您的 Ubuntu 系统中没有启用 IPMI。以下是一些步骤供您参考： 1. 检查您的服务器硬件是否支持 IPMI 功能，并且已经正确配置...
ipmitool使用报错Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or di...
05-19
这个错误通常是因为系统缺少了IPMI驱动或者没有加载IPMI模块导致的。你可以先检查系统是否已经安装了IPMI工具和驱动，如果没有安装则需要先安装。 如果已经安装了IPMI工具和驱动，但是还是出现了这个错误，那么可能...
启动ipmitool报错“Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file...."
mih2010的博客
08-12 1万+
操作系统为Ubuntu 16.04.3 LTS ipmitool已经安装，但运行命令会报错，如下： 原因：没有加载ipmi的核心模块，可以运行如下命令： You probably need to load the IPMI kernel modules: modprobe ipmi_devintf modprobe ipmi_si 彻底解决办法： You can add th...
ipmitool启动报错
weixin_34259232的博客
06-10 2764
当提示： [root@localhost ~]# ipmitool sdr Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Get Device ID command failed Unable to open SDR ...
Zabbix IPMI 调试的问题
weixin_34072458的博客
03-18 418
1 安装步骤 https://www.zabbix.com/forum/showthread.php?t=44968总结看上去很美。但是，如果是HP，结果是这个样子的。但是生活常常不美好。因为你的结果可能是这个样子的。为啥呢。。。。因为IPMI的文件不行。注意看一下文件里内。你的ipmi_proliant.pl文件。有的人用户名和密码都不改。还有版本我也有更新，可以试一试我最新版本。我改了一些地方...
运行应用，Could not open: device
zyn010101的专栏
12-30 1607
右键点击我的电脑-属性-高级系统设置-环境变量，在系统变量里边新建，变量名为ANDROID_SDK_HOME，变量值为android sdk路径，这样就可以了，重启eclipse把原来的建的虚拟设备都删了新建就可以了...
Vsan节点报“Power-on Reset”和“Could not open device ‘naa...‘ for probing: Busy”错误处理记录
jetliu05的博客
03-15 3467
客户一套5台主机组成的Vsan集群，偶尔会出现某台主机的VSAN磁盘无法访问导致主机进入维护模式的问题，严重时甚至会导致整个VSAN集群挂起，无法对外提供服务。 Vsan集群的5号机在2020年7月曾经出现过这个故障，2022年1月初4号机也出现同样的报错，导致整个VSAN集群无法正常使用，2022年3月初4号机再次出现同样的问题。 故障发生时，报错的Vsan主机会进入维护模式： 查看vmkernel.log日志，故障发生时VSAN的磁盘都在报“Could not open device naa… for
IPMI无法执行命令
weixin_43354959的博客
11-06 1万+
今天部署IPMI出现设备无法创建,这个问题以前遇到过,大部分是模块没有载入,以下是我排错的步骤: 引用 ipmitool lan print 1 Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Get Channel Info command failed...
在Linux系统上配置IPMI来远程控制服务器
胡振伟博客
04-03 2万+
IPMI(Intelligent Platform Management Interface，智能平台管理接口)是Intel提出的一套规范，可以用来远程管理服务器，目前最新版本是IPMI 2.0。许多服务器的远程控制卡，或KVM over IP设备，都使用了这个接口。   许多使用Intel芯片组的服务器主板上，都有这个接口。我们可以通过这个接口，来简单管理局域网里的这些服务器（如查看服务器内
【ipmitool】
qq_39057568的博客
07-04 1015
输入modprobe ipmi_si。说明机器上没有IPMI设备。
使用ipmitool命令报错处理
weixin_34200628的博客
01-11 848
报错内容： # ipmitool channel info 1 Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Unable to Get Channel Info 因为没有启动ipmi服务，解决方法： [ro...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值