qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 1b22e 2002.-优快云博客

本文记录了两台DELL R610服务器遇到的存储类故障现象及初步排查过程。故障表现为与EVA6400存储连接时出现大量错误日志，包括Abort命令发出、设备重置等。通过分析日志，发现可能是HBA卡、交换机或存储控制器存在问题。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

又一存储类故障,

两台DELL R610服务器.

HBA : 04:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
SWITCH ： Brocade 300
System : RHEL 5.6 64bit
Storage : EVA6400
device mapper : device-mapper-multipath-0.4.7-42.el5

两台服务器同时报错:

qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 1b22e 2002.
qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 2603b 2002.
qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 2603c 2002.
qla2xxx 0000:04:00.1: scsi(2:0:2): Abort command issued -- 1 27437 2002.

qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: LIP reset occured (f700).
qla2xxx 0000:04:00.1: LIP occured (f700).
qla2xxx 0000:04:00.1: LIP reset occured (f7f7).
qla2xxx 0000:04:00.1: LOOP UP detected (4 Gbps).
qla2xxx 0000:04:00.1: qla2xxx_eh_bus_reset: reset succeeded
qla2xxx 0000:04:00.1: Mailbox command timeout occured. Issuing ISP abort.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: Failed mailbox send register test
qla2xxx 0000:04:00.1: qla2x00_abort_isp: **** FAILED ****
qla2xxx 0000:04:00.1: scsi(2:0:2): Abort command issued -- 0 64981 2003.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: LIP reset occured (f700).
qla2xxx 0000:04:00.1: LIP occured (f700).
qla2xxx 0000:04:00.1: LIP reset occured (f7f7).
qla2xxx 0000:04:00.1: LOOP UP detected (4 Gbps).
qla2xxx 0000:04:00.1: scsi(2:0:2): DEVICE RESET ISSUED.
qla2xxx 0000:04:00.1: Mailbox command timeout occured. Issuing ISP abort.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: Failed mailbox send register test
qla2xxx 0000:04:00.1: qla2x00_abort_isp: **** FAILED ****
qla2xxx 0000:04:00.1: qla2xxx_eh_device_reset: device reset failed
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: LIP reset occured (f700).
qla2xxx 0000:04:00.1: LIP occured (f700).
qla2xxx 0000:04:00.1: LIP reset occured (f7f7).
qla2xxx 0000:04:00.1: LOOP UP detected (4 Gbps).
qla2xxx 0000:04:00.1: scsi(2:0:2): LOOP RESET ISSUED.
qla2xxx 0000:04:00.1: Mailbox command timeout occured. Issuing ISP abort.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: Failed mailbox send register test
qla2xxx 0000:04:00.1: qla2x00_abort_isp: **** FAILED ****
 rport-2:0-0: blocked FC remote port time out: saving binding
 rport-2:0-1: blocked FC remote port time out: saving binding

提交qlogic CASE后建议执行:

ftp://ftp.qlogic.com/support/Hidden/scripts/qla_linux_info.sh

不过执行到Gathering OS info: ... done

Gathering /sys files: ... done
Gathering /proc files: ... done
Gathering /etc files: ... done
Gathering module information: ... done
Gathering ethernet info: ... done
Gathering infiniband info: ... done
Gathering miscellaneous system info:

的时候，就卡住了.IOSTAT显示HBA连接的存储使用率100%.

等待QLOGIC出示解决办法了。

之前碰到过类似的情况，使用MSA2312fc的存储，后来故障原因是存储的控制器有问题。

在其他地方还找到一个类似案例，据说是存储端得问题，需要重建RAID（也就意味着数据要迁出去再迁回来）。

http://solutions.qlogic.com/KanisaSupportSite/dynamickc.do?externalId=Post-9128006&sliceId=Post-245254038&command=show&forward=threadedKC&kcId=Post-9128006

# 20110608 CASE被转到了DELL

又有一套收集日志的方法

http://support1.ap.dell.com/cn/zh/forum/thread.asp?fid=20&tid=276581

【其他】

尝试重新扫描设备 :

find /sys/class/scsi_host/host*/scan | while read line; do echo - - - > $line; done

参考 :