华为3100接入层交换机标准配置

1、 配置Telnet的登录密码及密码Level

su

User privilege level is 3, and only those commands can be used

whose level is equal or less than this.

Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE

<Quidway>sys

System View: return to User View with Ctrl+Z.

[Quidway]user-interface vty 0 4

[Quidway-ui-vty0-4]set authentication password cipher XXXXX

[Quidway-ui-vty0-4]user privilege level 0

2、 设置SU密码

[Quidway-ui-vty0-4]quit

[Quidway]su password

3、 配置管理IP地址以及网关

[Quidway]interface Vlan-interface 1

[Quidway-Vlan-interface1]ip address .4 255.255.255.240

[Quidway-Vlan-interface1]quit

[Quidway]ip route-static .0 0.0.0.0 10.0.13.1 preference 60

4、 配置一个Trunk口用户通信

[Quidway]int g

[Quidway-GigabitEthernet]port link-type trunk

[Quidway-GigabitEthernet]port trunk permit vlan all

Please wait........................................... Done.

[Quidway-GigabitEthernet]quit

5、 建立一个Vlan，将其余端口用静态的方式分配给该Vlan

[Quidway]vlan 78

[Quidway-vlan78]port Ethernet 1/0/1 to Ethernet 1/0/24

[Quidway-vlan78]quit

6、 保存配置

[Quidway]sa

The configuration will be written to the device.                  

Are you sure?[Y/N]y

Please input the file name(*.cfg)(To leave the existing filename

unchanged press the enter key):

Now saving current configuration to the device.  

Saving configuration. Please wait...

.......

Unit1 save configuration flash:/vrpcfg.cfg successfully

文转自gaodi2002 51CTO博客，原文链接:http://blog.51cto.com/gaodi2002/1618210