CocoaPods did not set the base configuration of your project because your project already has a cust...

最新推荐文章于 2023-11-22 10:00:10 发布

weixin_30908941

最新推荐文章于 2023-11-22 10:00:10 发布

阅读量830

点赞数

CC 4.0 BY-SA版权

文章标签： cocoapods

原文链接：http://www.cnblogs.com/richard-youth/p/8309247.html

本文介绍了解决在封装消息推送SDK过程中遇到的Pod安装错误的方法。主要问题是由于项目配置与CocoaPods集成冲突导致，解决方案是在项目中将特定配置项更改为None，然后重新执行pod install。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

今天在封装自己的消息推送SDK的时候，pod install 的时候，突然报这个错误，解决方式如下：

$ pod install

Analyzing dependencies

Downloading dependencies

Using AFNetworking (3.1.0)

Using CocoaAsyncSocket (7.6.2)

Generating Pods project

Integrating client project

Sending stats

Pod installation complete! There are 2 dependencies from the Podfile and 2 total pods installed.

[!] The Podfile contains framework or static library targets, for which the Podfile does not contain host targets (targets which embed the framework).

If this project is for doing framework development, you can ignore this message. Otherwise, add a target to the Podfile that embeds these frameworks to make this message go away (e.g. a test target).

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `NewsPushClientSDK` to `Pods/Target Support Files/Pods-NewsPushClientSDK/Pods-NewsPushClientSDK.debug.xcconfig` or include the `Pods/Target Support Files/Pods-NewsPushClientSDK/Pods-NewsPushClientSDK.debug.xcconfig` in your build configuration (`../Pods/Target Support Files/Pods-PushClientSDK/Pods-NewsPushClientSDK.debug.xcconfig`).

[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set. In order for CocoaPods integration to work at all, please either set the base configurations of the target `NewsPushClientSDK` to `Pods/Target Support Files/Pods-NewsPushClientSDK/Pods-NewsPushClientSDK.release.xcconfig` or include the `Pods/Target Support Files/Pods-NewsPushClientSDK/Pods-NewsPushClientSDK.release.xcconfig` in your build configuration (`../Pods/Target Support Files/Pods-PushClientSDK/Pods-NewsPushClientSDK.release.xcconfig`).

解决如下：在项目里把下面的Configuration都改为None,然后在pod install