ORA-27054错误处理

最新推荐文章于 2021-05-15 21:11:42 发布

转载最新推荐文章于 2021-05-15 21:11:42 发布 · 166 阅读

1 ·

CC 4.0 BY-SA版权

原文链接：http://www.cnblogs.com/mqxnongmin/p/10524971.html

在虚拟机RAC环境下，遇到ORA-27054错误，源于NFS文件系统参数不当。调整mount参数及使用特定事件或补丁可解决。详细介绍了不同操作系统下的正确NFS挂载选项。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

今天在虚拟机环境下做实验，在将rac环境改动为flashback on时，报出了ORA-27054错误，错误代码例如以下：

Errors in file /u01/app/oracle/admin/racdb/udump/racdb2_ora_25551.trc:
ORA-38701: Flashback database log 2 seq 1 thread 2: "/u01/flashback/RACDB/flashback/o1_mf_%u_.flb"
ORA-27054: NFS file system where the file is created or resides is not mounted with correct options

从错误描写叙述能够看出，闪回文件夹是通过nfs文件系统来实现的，而系统挂载nfs时，採用了错误的參数选项，导致oracle报错。上网查资料，通过文档359515.1顺利解决这个问题。

整理部分内容例如以下：

RAC

In the table below

Binaries is the shared mount points where the Oracle Home and CRS_HOME is installed.
Datafiles includes Online Logs, Controlfile and Datafiles

Operating System	Mount options for Binaries	Mount options for Oracle Datafiles	Mount options for CRS Voting Disk and OCR
Sun Solaris *	rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp, noac,vers=3,suid	rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp,noac, forcedirectio, vers=3,suid	rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp,vers=3, noac,forcedirectio
AIX (5L) **	rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp,vers=3, timeo=600	cio,rw,bg,hard,nointr,rsize=32768, wsize=32768,proto=tcp,noac, vers=3,timeo=600	cio,rw,bg,hard,intr,rsize=32768, wsize=32768,tcp,noac, vers=3,timeo=600
HPUX 11.23 **** –	rw,bg,vers=3,proto=tcp,noac, hard,nointr,timeo=600, rsize=32768,wsize=32768,suid	rw,bg,vers=3,proto=tcp,noac, forcedirectio,hard,nointr,timeo=600, rsize=32768,wsize=32768,suid	rw,bg,vers=3,proto=tcp,noac, forcedirectio,hard,nointr,timeo=600 ,rsize=32768,wsize=32768,suid
Linux x86 #	rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp, vers=3, timeo=600, actimeo=0	rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,actimeo=0, vers=3,timeo=600	rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,noac,vers=3, timeo=600
Linux x86-64 #	rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,vers=3, timeo=600, actimeo=0	rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,actimeo=0, vers=3,timeo=600	rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,vers=3, timeo=600,noac
Linux – Itanium	rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,vers=3, timeo=600, actimeo=0	rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,actimeo=0, vers=3,timeo=600	rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,noac,vers=3, timeo=600

* NFS mount option “forcedirectio” is required on Solaris platforms when mounting the OCR/CRS files when using Oracle 10.1.0.4 or 10.2.0.2 or later (Oracle unpublished bug 4466428)
** AIX is only supported with NAS on AIX 5.3 TL04 and higher with Oracle 10.2.0.1 and later (NetApp)
*** NAS devices are only supported with HPUX 11.23 or higher ONLY

# These mount options are for Linux kernels 2.6 and above for older kernels please check Note 279393.1

Due to Unpublished bug 5856342, it is necessary to use the following init.ora parameter when using NAS
with all versions of RAC on Linux (x86 & X86-64 platforms) until 10.2.0.4. This bug is fixed and included in 10.2.0.4 patchset.
filesystemio_options = DIRECTIO

Single Instance

Operating System	Mount options for Binaries	Mount options for Oracle Datafiles
Sun Solaris * (8, 9, 10)	rw,bg,hard,rsize=32768, wsize=32768,vers=3,nointr, proto=tcp,suid	rw,bg,hard,rsize=32768, wsize=32768,vers=3,[forcedirectio or llock], nointr,proto=tcp,suid
AIX (5L) **	rw,bg,hard,rsize=32768, wsize=32768,vers=3,intr, timeo=600,proto=tcp	rw,bg,hard,rsize=32768, wsize=32768,vers=3,cio,intr, timeo=600,proto=tcp
HPUX 11.23 ****	rw,bg,hard,rsize=32768, wsize=32768,vers=3,nointr, timeo=600,proto=tcp,suid	rw,bg,hard,rsize=32768, wsize=32768,vers=3,nointr, timeo=600,proto=tcp,suid
Linux x86 #	rw,bg,hard,rsize=32768, wsize=32768,vers=3,nointr, timeo=600,tcp	rw,bg,hard,rsize=32768, wsize=32768,vers=3,nointr, timeo=600,tcp,actime=0*
Linux x86-64 #	rw,bg,hard,rsize=32768, wsize=32768,vers=3,nointr, timeo=600,tcp	rw,bg,hard,rsize=32768, wsize=32768,vers=3,nointr, timeo=600,tcp,actime=0*
Linux – Itanium	rw,bg,hard,rsize=32768, wsize=32768,vers=3,nointr, timeo=600,tcp	rw,bg,hard,rsize=32768, wsize=32768,vers=3,nointr, timeo=600,tcp

* actime=0 or noac can be used

參照上文，改动mount參数例如以下：

[root@node2 bdump]# cat /etc/rc.d/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local

service iscsi restart
#start_udev

modprobe hangcheck-timer
mount -t nfs -o rw,bg,noac,hard,nointr,rsize=32768,wsize=32768,nolock,proto=tcp,actimeo=0,vers=3,timeo=600 192.168.2.31:/u01/flashback/ /u01/flashback/

问题成功解决！

另外，在网上查到资料，还能够使用例如以下方式解决

1：设置事件10298 level 32

alter system set event='10298 trace name context forever,level 32' scope=spfile;

又一次启动数据库后生效.

2：打补丁:5146667

我没有试验，有兴趣的朋友能够试试，

转载于:https://www.cnblogs.com/mqxnongmin/p/10524971.html