opensatck　使用devstack在 laptoｐ上的网络配置-优快云博客

本文介绍了DevStack在单接口部署场景下与Neutron的配置方法。通常情况下，硬件路由器用于外部连接及DHCP服务，而开发机器则通过同一子网与其他机器通信。文中详细列举了DevStack的各项配置参数。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

http://docs.openstack.org/developer/devstack/guides/neutron.html

Physical Network Setup

In most cases where DevStack is being deployed with a single interface, there is a hardware router that is being used for external connectivity and DHCP. The developer machine is connected to this network and is on a shared subnet with other machines.

DevStack Configuration

HOST_IP=172.18.161.6
SERVICE_HOST=172.18.161.6
MYSQL_HOST=172.18.161.6
RABBIT_HOST=172.18.161.6
GLANCE_HOSTPORT=172.18.161.6:9292
ADMIN_PASSWORD=secrete
DATABASE_PASSWORD=secrete
RABBIT_PASSWORD=secrete
SERVICE_PASSWORD=secrete
SERVICE_TOKEN=secrete

## Neutron options
Q_USE_SECGROUP=True
FLOATING_RANGE="172.18.161.0/24"
FIXED_RANGE="10.0.0.0/24"
Q_FLOATING_ALLOCATION_POOL=start=172.18.161.250,end=172.18.161.254
PUBLIC_NETWORK_GATEWAY="172.18.161.1"
Q_L3_ENABLED=True
PUBLIC_INTERFACE=eth0
Q_USE_PROVIDERNET_FOR_PUBLIC=True
OVS_PHYSICAL_BRIDGE=br-ex
PUBLIC_BRIDGE=br-ex
OVS_BRIDGE_MAPPINGS=public:br-ex

转载于:https://www.cnblogs.com/shaohef/p/4874402.html