模拟器与真机下ffmpeg的编译方法

参考来自：http://www.cocoachina.com/bbs/read.php?tid=79169&keyword=ffmpeg

一、编译ffmpeg模拟器版本

1、到https://github.com/gabriel/ffmpeg-iphone-build下载ffmpeg-iphone-build

2、先将gas-preprocessor.pl拷贝到/usr/sbin/目录中。

3、到ffmpeg官网上下载ffmpeg源码

下载地址：source snapshot

4、在终端下定位到ffmpeg的目录下运行

./configure --disable-doc --disable-ffmpeg --disable-ffplay --disable-ffserver --enable-cross-compile --arch=arm --target-os=darwin --cc=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc --as='gas-preprocessor/gas-preprocessor.pl /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc' --sysroot=/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk --cpu=cortex-a8 --extra-cflags='-arch armv7' --extra-ldflags='-arch armv7 -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk' --enable-pic --enable-decoder=rawvideo --disable-asm

5、输入make命令

6、将libavcodec.a，libavdevice.a，libavformat.a，libavutil.a，libswscale.a到对应的目录下拷贝出来。

7.在项目中就可以使用了。可以参考开源示例iFrameExtractor （git clone git://github.com/lajos/iFrameExtractor.git）需要将该项目的ffmpeg文件夹库替换为你编译的ffmpeg源码文件夹，在ffmpeg目录下新建lib目录，将刚刚拷贝出来的静态库拷贝进去。打开项目，添加libbz2.1.0.dylib系统库文件。点击编译运行就可以使用了。
8.注意如果使用的是ffmpeg0.8.5的库的话iFrameExtractor中的codec_type需要修改为AVMEDIA_TYPE_VIDEO。

二、编译真机arm7版本

1. 下载:
git clone git://github.com/lajos/iFrameExtractor.git
2. 编辑:
build_armv6和build_armv7,修改./configure后面的参数,主要是SDK版本.我的是5.0,修改为:

./configure --disable-doc --disable-ffmpeg --disable-ffplay --disable-ffserver --enable-cross-compile --arch=arm --target-os=darwin --cc=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc --as='gas-preprocessor/gas-preprocessor.pl /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc' --sysroot=/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.0.sdk --cpu=arm1176jzf-s --extra-cflags='-arch armv6' --extra-ldflags='-arch armv6'

3. 编译:
出错,提示:
/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc is unable to create an executable file.
C compiler test failed.
查看config.err文件,最后提示:
ld: file not found: /usr/lib/system/libcache.dylib for architecture armv7
collect2: ld returned 1 exit status
4. 重新修改configure参数为:

./configure --disable-doc --disable-ffmpeg --disable-ffplay --disable-ffserver --enable-cross-compile --arch=arm --target-os=darwin --cc=/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc --as='gas-preprocessor/gas-preprocessor.pl /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc' --sysroot=/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.3.sdk --cpu=cortex-a8 --extra-cflags='-arch armv7' --extra-ldflags='-arch armv7 -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.3.sdk' --enable-pic

5、添加库libbz2.1.0.dylib,再次编译。

转载于:https://www.cnblogs.com/foxmin/archive/2012/03/17/2403338.html