Professional Soybean OIL PRESS MACHINERY Process Introduction

Professional Soybean OIL PRESS MACHINERY Process Introduction

In the Soybean OIL PRESS MACHINERY process, the solvent extraction process is the subject of the legal system of OIL PRESS MACHINERY. Leaching through specific oil extraction devices to extract a reasonable way to separate embryo material and solvent, so as to achieve fully dissolve grease, oil extraction. During oil extraction process, there are three touch ways of solvent and embryos:

 

(1) Immersion: the germ flake always soaked in solvent (or lean oil) in the completion of the leaching process. In this way the leaching time is short, miscella is much, but concentration is sparse, namely the mixed oil containing less fat, more mixed oil containing residue.

 

(2) Percolation: the touching process of solvent and germ flake is always spray - penetration state, after extraction, we can get oil-rich mixture, less mixed oil containing residue. However, leaching time is longer.

 

(3) Immersion, spray hybrid: first soaked material embryo, and then spray penetration, improved oil extraction rate and efficiency, but also reduce the leaching time.

 

Above are three process of soybean OIL PRESS MACHINERY. If you have any problem about it, please feel free to consult us.

http://www.oil-press-machinery.org

转载于:https://www.cnblogs.com/agricultural-machinery/p/6952718.html