RK3288开发过程中遇到的问题点和解决方法之Kernel

最新推荐文章于 2025-04-05 15:28:38 发布

weixin_30553837

最新推荐文章于 2025-04-05 15:28:38 发布

阅读量485

点赞数

CC 4.0 BY-SA版权

原文链接：http://www.cnblogs.com/huke4853/p/6396490.html

本文介绍了一段关于修改背光亮度区间的代码实现，通过调整内核中的pwm_backlight_update_status函数，使得背光亮度在特定条件下不会低于50。此改动影响了设备背光的最小显示亮度。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

修改背光改变区间

kernel\drivers\video\backlight\pwm_bl.c

static int pwm_backlight_update_status(struct backlight_device *bl)
  {
   struct pwm_bl_data *pb = bl_get_data(bl);
      int brightness = bl->props.brightness;
      int duty_cycle;
 
     if (bl->props.power != FB_BLANK_UNBLANK ||
         bl->props.fb_blank != FB_BLANK_UNBLANK ||
         bl->props.state & BL_CORE_FBBLANK)
         brightness = 0;

     if (pb->notify)
         brightness = pb->notify(pb->dev, brightness);
//此处修改区间值
     if (brightness > 0) {
        if(brightness<50)
             brightness=50;
         duty_cycle = compute_duty_cycle(pb, brightness);
         pwm_config(pb->pwm, duty_cycle, pb->period);
         pwm_backlight_power_on(pb, brightness);
     } else
         pwm_backlight_power_off(pb);
 
     if (pb->notify_after)
         pb->notify_after(pb->dev, brightness);
 
     return 0;
 }