河南省第十届省赛 Plumbing the depth of lake (模拟)

本文介绍了一种用于探测湖底最大深度的算法实现,通过分析网格数据找出至少两个相邻区域具有的最大相同深度,适用于地形复杂的情况。使用八方向搜索策略进行深度比较。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

title: Plumbing the depth of lake 河南省第十届省赛

题目描述:

There is a mysterious lake in the north of Tibet. As the sun shines, the surface of the lake is colorful and colorful. The lake was unfathomable in rainy weather.  After the probe,  It has an interesting bottom in that it is full of little hills and valleys. . Scientists wonders how deep the bottom of the lake is.

Scientists use the most advanced radar equipment to detect the bottom of the lake. It is the discovery that the deepest part is relatively flat. Thet want to know the largest depth number only if it is verified by the fact that the same depth appears in an adjacent reading.

To facilitate computing, scientists have put the lake as M * N grids .*The depth  reading of each grid is already known. some readings might be 0-- It's a small island on the lake.

Find the greatest depth that appears in at least two 'adjacent'readings (where 'adjacent' means in any of the potentially eight squares that border a square on each of its sides and its diagonals). The lake has at least one pair of positive, adjacent readings.

输入:

The first line of the input contains one integers T, which is the nember of  test cases (1<=T<=5).  Each test case specifies:

  • Line 1:      Two space-separated integers: M and N   (1 ≤ M,  N ≤ 50)

  • Lines 2..M+1: Line i+1 contains N space-separated integers that  represent the depth of the lake across row i: Dij    (0 <= Dij <=1,000,000);

输出:

For each test case generate a single line:  a single integer that is the depth of the lake determined.

样例输入:

1
4 3
0 1 0
1 2 0
1 5 1
2 3 4

样例输出:

1

分析:

找出湖底的只要有两个单位面积相连(八个方向)的最大的深度,跟这个深度面积的大小没有关系。

代码:

#include <cstdio>
#include <cstring>
int Map[55][55];
int dx[8] = {-1,-1,-1,0,0,1,1,1};
int dy[8] = {-1,0,1,-1,1,-1,0,1};
int Max;
void Search(int i,int j)
{
    int k;
    if(Map[i][j]==-1) return ;

    if(Max >= Map[i][j]) return ;///找出深度最大的

    for(k=0; k<8; k++)
    {
        if(Map[i][j] == Map[i + dx[k]] [j + dy[k]]) ///八个方向找一下,只要有一个就行,有就更新 Max
        {
            Max = Map[i][j];
            break;
        }
    }
}
int main()
{
    int T;
    scanf("%d",&T);
    while(T--)
    {
        Max = -1;
        int i,j,m,n;
        scanf("%d%d",&m,&n);
        memset(Map,-1,sizeof(Map));
        for(i=1; i<=m; i++)
        {
            for(j=1; j<=n; j++)
            {
                scanf("%d",&Map[i][j]);
            }
        }
        for(i=1; i<=m; i++)
        {
            for(j=1; j<=n; j++)
            {
                Search(i,j);
            }
        }
        printf("%d\n",Max);
    }
    return 0;
}

转载于:https://www.cnblogs.com/cmmdc/p/6887914.html

CH341A编程器是一款广泛应用的通用编程设备,尤其在电子工程和嵌入式系统开发领域中,它被用来烧录各种类型的微控制器、存储器和其他IC芯片。这款编程器的最新版本为1.3,它的一个显著特点是增加了对25Q256等32M芯片的支持。 25Q256是一种串行EEPROM(电可擦可编程只读存储器)芯片,通常用于存储程序代码、配置数据或其他非易失性信息。32M在这里指的是存储容量,即该芯片可以存储32兆位(Mbit)的数据,换算成字节数就是4MB。这种大容量的存储器在许多嵌入式系统中都有应用,例如汽车电子、工业控制、消费电子设备等。 CH341A编程器的1.3版更新,意味着它可以与更多的芯片型号兼容,特别是针对32M容量的芯片进行了优化,提高了编程效率和稳定性。26系列芯片通常指的是Microchip公司的25系列SPI(串行外围接口)EEPROM产品线,这些芯片广泛应用于各种需要小体积、低功耗和非易失性存储的应用场景。 全功能版的CH341A编程器不仅支持25Q256,还支持其他大容量芯片,这意味着它具有广泛的兼容性,能够满足不同项目的需求。这包括但不限于微控制器、EPROM、EEPROM、闪存、逻辑门电路等多种类型芯片的编程。 使用CH341A编程器进行编程操作时,首先需要将设备通过USB连接到计算机,然后安装相应的驱动程序和编程软件。在本例中,压缩包中的"CH341A_1.30"很可能是编程软件的安装程序。安装后,用户可以通过软件界面选择需要编程的芯片类型,加载待烧录的固件或数据,然后执行编程操作。编程过程中需要注意的是,确保正确设置芯片的电压、时钟频率等参数,以防止损坏芯片。 CH341A编程器1.3版是面向电子爱好者和专业工程师的一款实用工具,其强大的兼容性和易用性使其在众多编程器中脱颖而出。对于需要处理25Q256等32M芯片的项目,或者26系列芯片的编程工作,CH341A编程器是理想的选择。通过持续的软件更新和升级,它保持了与现代电子技术同步,确保用户能方便地对各种芯片进行编程和调试。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值