HCIE实验TAC

本文通过具体步骤介绍了如何配置交换机以实现eth-trunk环路,并详细记录了MSTP实例配置及BGP邻居建立过程。此外,还展示了如何进行mux-vlan配置及ISIS水平配置。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

A goal is a dream with a deadline.

目标就是给梦想设定一个期限

 

先做题目2再做题目1,要让eth-trunk形成环路

TAC-1 MSTP Site1

  [LSW3]stp mode mstp

  [LSW3]inter e0/0/21-22

  [LSW3-Ethernet]dis this

  [LSW3-Ethernet]port trunk allow-pass vlan all

  [LSW3-Ethernet]undo stp instance 1/2 cost

 

  [LSW1]inter e0/0/21

  [LSW1-Ethernet]port trunk allow-pass vlan all

  

  [LSW2]dis curr

  [LSW2]stp instance 2 root primary

  [LSW2]stp region-configuration

  [LSW2]instance 1 vlan 12

  [LSW2]instance 2 vlan 34

  [LSW2]active region-configuration

TAC-2 Eth-trunk Site1

  [LSW1]inter e0/0/18-20                     #删除LSW1跟LSW2关于eth-trunk的配置

  [LSW1]undo eth-trunk

  [LSW1]undo inter eth-trunk 12

  [LSW2]inter e0/0/18-20

  [LSW2]undo eth-trunk

  [LSW2]undo inter eth-trunk 12

 

  [LSW1]inter eth-trunk 12                   #配置eth-trunk,LSW2上配置相同,最后dis eth-trunk 12验证配置

  [LSW1-Eth-Trunk12]mode lacp-static

  [LSW1-Eth-Trunk12]load-balance src-dst-ip

  [LSW1-Eth-Trunk12]trunkport Ethernet 0/0/18 to 0/0/20

  [LSW1-Eth-Trunk12]port link-type trunk

  [LSW1-Eth-Trunk12]port trunk allow-pass vlan all

TAC-3 BGP Adv Site1+AR1

  [LSW1]bgp 300                                                       #AR1分别与LSW1、LSW2建立EBGP邻居

  [LSW1-bgp]router-id 10.1.100.100

  [LSW2]bgp 300

  [LSW2-bgp]router-id 10.1.200.200

  [AR1]bgp 100

  [AR1-bgp]ipv4 vpn-instance 1

  [AR1-bgp-1]peer 10.1.200.200 as-number 300

  [AR1]inter g2/0/1

  [AR1-G]ip binding vpn-instance 1 

  [AR1-G]ip address 10.1.100.1 255.255.255.0

TAC-4 Mux-vlan

  [AR26]isis 100

  [AR26]is-level level-2

 

 

 

 

  

 

  

 

转载于:https://www.cnblogs.com/xuebing666666/p/6600392.html

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值