1. 第五章按照上位机和下位机的层次构建了绣花机控制系统的软件框架，设计了键盘输入模块、图形显示模块、USB驱动模块、花样存储与管理模块、串口通信模块、机电控制模块的程序。
In Chapter 5, the software frame of the embroidery machine control system is constructed in the light of the hierarchy of master system and slave system. The programs of keyboard entry, graphical display, USB drive, pattern store and management, serial communication and electromechanical control are designed.
2. 在采用8051F单片机为核心的硬件系统上，用C语言编写直流调速系统的软件程序，包括：显示、键盘输入、测速、输出调节软件模块。
In a 8051 F SCM as the core hardware system, the C language used to prepare DC converter system software programs, including: display, keyboard input, guns, the output regulation software modules.
3. 以AT89C52及双口RAM(IDT7202)为核心，由输入电路、分频电路、数据的采集与存储模块、单片机控制及转换模块、触发电路、键盘控制模块等功能模块组成。
Regard AT89C52 and a RAM (IDT7202)s as the core, from input the electric, cent electric circuit, data collect with saving mold piece, single a machine control and Ds/A conversion mold piece, trigger electric circuit keyboard control mold an etc. function mold piece constitute.
4. 数据输入模块基于专用的键盘显示芯片与双微控制器的红外无线收发模块(利用FPGA的虚拟总线完成主从控制器的通信)，实现普通键盘输入与遥控器的短距离无线控制，方便用户的操作。
On the dummy bus provided by FPGA and communication between the primary MCU and the slave one, two input-methods could be implemented in one system. Infrared input as a second input method, will offer user a convenient operation.
5. 数据输入模块基于专用的键盘显示芯片与双微控制器的红外无线收发模块(利用FPGA的虚拟总线完成主从控制器的通信)，实现普通键盘输入与遥控器的短距离无线控制，方便用户的操作。
The system also produces those modulated signals through sampling the base-band signal by high-speed ADC, synthesizing in FPGA and output by DAC. The input module operates on the dedicated keyboard chip and Infrared transmitter and receiver. On the dummy bus provided by FPGA and communication between the primary MCU and the slave one, two input-methods could be implemented in one system.
6. 具体实施办法是：以单片机AT89C52为核心，通过键盘向单片机输入指定频率，再由单片机控制可编程计数器8254和锁相环4046组成的合成模块，输出指定频率；同时，单片机将合成的频率送显示模块显示出来。
The concrete implementation means are: Take monolithic integrated circuit AT89C52 as the core, assigns the frequency through the keyboard to the monolithic integrated circuit input, again controls the synthesis module by the monolithic integrated circuit which the programmable counter 8254 and the phase-lock link 4046 is composed, the output assigns the frequency; At the same time, the monolithic integrated circuit will synthesize the frequency will deliver the demonstration module to demonstrate.
7. 本系统主要包括采集模块、显示模块、通信模块、键盘输入模块和功率控制模块。
This system mainly includes the gathering module, the demonstration module, the connection module, the keyboard entry module and the power control module.
8. 该系统通过使用键盘输入和显示模块显示使温度的检测和控制更加直观和方便。
In the system, the use of keyboard and LED display module makes temperatures control and measurement more easily.
9. 本文所设计的正弦信号发生器主要由DDS波形产生模块、单片机控制模块、键盘输入模块和数码管显示模块组成。
This system consists of DDS signal generator module, MCU control module, keyboard input module and nixie tube display module.
10. 按照功能的不同，硬件划分成处理器系统模块、模拟信号输入和转换模块、开关量输入输出模块、通信模块、时钟模块、键盘显示模块、电源模块。
According to different function, the hardware part is divided into processor module, analog signals input and converting module, digital signals module, communication module, clock module and display module.
11. 对硬件模块的其他部分，本文也进行了详细的论述。主要包括处理器模块、存储器扩展、接口、键盘输入、液晶显示等。
This paper has also dis-cussed the rest modules of the hardware sufficiently, including the processor module, memory expansion, interfaces, keyboard inputs, and LCD display module.
12. 软件设计部分，完成了控制系统电路主程序软件的编写、中断模块程序设计、显示电路程序设计、键盘输入电路的实现程序及其对它部分功能的软件程序的编写。
The part of software design, the control system software for the preparation of the circuit, interrupt module program, display circuit programming, keyboard input circuit implementation procedures and some of the features of the software program of its preparation.
13. 设计出了励磁方式控制子程序、A/D采样控制子程序、输入数据处理与流量计算子程序、键盘管理及LCD的汉字液晶显示等模块化程序。
As a result, the following subroutines are programmed: the optional excitation models, A/D sample, the flux processing and compute, the keyboard management, and the LCD display.
14. 在电路设计部分，将整个系统设计成三个模块：脉冲控制单元、键盘输入单元和数码管显示单元。
In the circuit design work, the entire system is devided into three modules: pulse control unit, keyboard input unit and digital display unit.
15. 下位机监控装置设有友好的人机操作模块，包括液晶显示、键盘输入、语音提示、时钟显示、射频卡认证等外围模块。
The subordinate computer monitoring device has friendly man-machine operation interface, which includes the modules such as LCD display, keyboard input, voice prompts, clock display, RF card identification and so on.
16. 嵌入式肿瘤热疗系统包括组织温度采集与转换系统、超声功率控制信号发生模块、存储管理系统、人机交互系统(包括液晶显示及键盘输入)以及其他基本功能模块。
The embedded hyperthermia instrument consists of inner-tissue temperature acquisition and conversion system, ultrasound power controlling signal generation module, memory controller, human-machine intercommunication system (including LCD display and keyboard input) and other basic function modules.
17. 数控代码编辑模块实现了应用系统主界面、文档编辑及输入用软键盘等功能。
In the NC code edition module, the system main interface, document edition and soft keyboard used to input are realized.
18. 对于外部模块的设计，提供了键盘、串口、计时器、离散输入／输出等几种通用模块的设计思路、设计框图和具体实现。
As to the design of outside modules, offer design thought, design block diagram, realization of serial communication module, timing module, the keyboard module, and discrete input/output module, etc.
19. 键盘处理模块，实现菜单操作，界面切换及数据的输入。
Keyboard processing module to achieve menu-driven interface switching and data input.
20. 其中单片机为系统的核心控制器，此外还包括键盘输入模块、LCD液晶显示模块以及DA转换模块。
The chip microprocessor is the core controller of the system, and the system also includes the keyboard input module, LCD display module and DA modular converter.
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
