基于RTL819X实现的Router/AP的SDK配置和编译

最新推荐文章于 2025-11-02 10:35:52 发布
原创 最新推荐文章于 2025-11-02 10:35:52 发布 · 置顶 · 5.5k 阅读 · 2 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。

本文详细介绍了如何配置和编译基于RTL819X的Router/AP SDK，包括make menuconfig、make linux_menuconfig和make users_menuconfig等配置方法，以及使用make命令进行编译的过程。

***************************************************************************************************************************
作者：EasyWave                                                                             时间：2015.01.10

类别：路由器类-基于RTL819X的SDK配置和编译                          声明：转载，请保留链接

最低0.47元/天 解锁文章
Realtek sdk rtl819x-SDK-v3.4.13-full-package uboot编译操作说明
wgl307293845的博客
03-05 1843
1.解压00013461-rtl819x-SDK-v3.4.13-full-package.tar.gz软件包,解压之后文件名称rtl819x-SDK-v3.4.13-full-package tar -xvf00013461-rtl819x-SDK-v3.4.13-full-package.tar.gz 2.切换到解压目录rtl819x-SDK-v3.4.13-full-package cdrtl819x-SDK-v3.4.13-full-package 3.先解压rtl819x.tar...
【Realtek sdk-4.4.1】RTL8198D升级uboot和固件操作方法
wgl307293845的博客
09-10 4411
环境说明 win10系统，串口工具 电脑设置静态IP地址 192.168.1.66 打开tftpserver工具 将uboot和环境变量放到Desktop目录下 encode_uboot.imguboot-env-98d-eng.bin 进入boot升级，上电之后按下键盘ESC键 U-Boot 2011.12.NA (Sep 03 2021 - 14:56:16) Board:RTL9607C/RTL9603C, CPU:900MHz, LX:200MHz, MEM:525MH...
Realtek无线路由rtl819x sdk全套资料.rar
04-02
Application_Note_RTL819X.pdf Kernel_2_6_SDK_User_Guide_V1.228.pdf（兼容linux-3.10） Realtek_EasyMesh_User_Guide_V1.3.pdf Realtek_Ipv6_Ready_Logo_P2_User_Guide.pdf Realtek_IPv6_user_guide.pdf Realtek_SmartRoaming_User_Guide.pdf Realtek_TR069_Guide.pdf Realtek_TR069_How_to_Add_the_TR-69_Parameters.pdf Realtek_WPS_user_guide.pdf RTL819X_Firmware_Release_Note_v3.4.11D-CMCC-Pre6.pdf RTL819X_Firmware_Release_Note_v3.4.11D-CMCC-Pre6a.pdf System_Note.pdf Universal_Repeater_Mode_Guide.pdf Realtek_SDK_Package_List_3.4.11d-CMCC-pre6.xls Realtek_TR-069_Data_Model_Support_List_098_181_143.xlsx
小智音箱集成RTL8195AM实现远程OTA升级
最新发布
weixin_35756637的博客
11-02 564
本文深入解析基于RTL8195AM芯片的小智音箱OTA升级系统，涵盖双Bank闪存架构、安全启动、差分更新、断点续传及回滚机制，结合实际部署案例与未来演进方向，构建高可靠远程固件更新方案。
openwrt-realtek-rtl819xd
11-06
路由器固件
基于RTL819X实现的Router/AP的SDK简介
嵌入式与人工智能天地
01-09 4284
闲来无事,在一个Sourceforge网站上无意之间看到了RTL819X的Router/AP的SDK,下载下来看了看,原来这个Router/AP是基于开源的BOA Web服务器之上开发的linux下的Router.
瑞昱rtl819x-SDK-v3.4.14b的watchdog分析
buhuidage的博客
12-24 1674
watchdog 看门狗，又叫watchdog timer，是一个定时器电路，一般有一个输入，叫喂狗或踢狗；一个输出到MCU 的 RST 端，MCU 正常工作的时候，每隔一段时间输出一个信号到喂狗端，给 WDT 清零，如果超过规定的时间不喂狗（一般在程序跑飞时），WDT 定时超过，就会给出一个复位信号到 MCU，使 MCU 复位。防止 MCU 死机。
基于RTL819X实现的Router/AP的源码分析[一]
嵌入式与人工智能天地
01-11 6681
详细的关于BOA的介绍，请参考我的博文：嵌入式Linux下BOA网页服务器的移植的详细介绍，BOA WebServer是一款单任务的HTTP服务器，与其他网页服务器不同之处，是当有连接请求到来是，它既不是为每个连接都单独创建进程，也不是采用复制自身进程处理多链接，而是通过建立HTTP请求列表来处理多路HTTP连接请求，同时它只为CGI程序创建新的简称，在最大程度上节省了系统资源，这对于资源受限的嵌入式系统来说非常重要，同时它还自动生成目录、自动解压文件等功能，因此BOA具有很高的HTTP请求处理速度和效率，
Realtek RTL8192 AP-Router SDK开发指南 v1.117
该文档包含了对Realtek AP-Router SDK的全面介绍和使用教程，适用于基于Linux内核2.6的环境。主要涵盖了以下关键知识点： 1. **AP-Router SDK介绍**：文档首先概述了AP-Router SDK的主要目标和应用场景，包括作为...
Realtek最新无线路由开发SDK GuideV1.94 && Application NotesV2.2(共两个PDF文档)
06-13
Realtek无线路由开发SDK Guide && Application Notes(共两个PDF文档), 1.Realtek Kernel 2.6 SDK User Guide Date: 2014/03/28 ...2.Application Note for RTL819X System Date: 2014/03/31 Version: 2.2
rtl819x-SDK-v3.2.3中关于链接器LD变量设置的问题
雜貨鋪
01-19 2570
从网上下载rtl819x-SDK-v3.2.3.tar.gz http://sourceforge.net/projects/rtl819x/ 解压后在目录rtl819x-SDK-v3.2.3/rtl819x/users下的Makefile中110行开始 CC = $(CROSS_COMPILE)gcc CXX = $(CROSS_COMPILE)g++ LD = $
rtl819x-SDK-v4.4.1b-patch-20200717.tar
11-18
Realtek sdk-4.4.1b patch，合入到sdk-4.4.1a
RTL819X-开源
05-30
用于基于 SoC Realtek RTL819X 的平台的开源替代固件和软件。
Realtek_RTL819xCU.zip
02-25
无线网卡Realtek_RTL819xCU驱动程序，wifi无线网卡Realtek_RTL819xCU驱动程序，
Application_Note_RTL819X.pdf
07-26
RTL819X系列的芯片方案，SDK开发指导手册。 1. Introduction .................................................................................................................................7 1.1. Feature Lists .................................................................................................................7 1.2. Channel Plan ................................................................................................................8 1.2.1. 2.4G Channel Plan ................................................................................................8 1.2.2. 5G Channel Plan ...................................................................................................8 2. Configuration..............................................................................................................................10 2.1. Configuration Files .....................................................................................................10 2.2. MIB .............................................................................................................................11 2.3. iwconfig/iwlist............................................................................................................29 2.3.1. iwconfig ..............................................................................................................29 2.3.2. iwlist ...................................................................................................................30 3. Basic Driver Operation and Setting ............................................................................................32 3.1. Basic Driver Operation ...............................................................................................32 3.1.1. Bring up Interface...............................................................................................32 3.1.2. Set MAC Address ................................................................................................32 3.1.3. Down Interface...................................................................................................32 3.2. Basic Driver Setting ....................................................................................................32 3.2.1. 802.11 b/g/n mode ............................................................................................32 3.2.2. Channel ..............................................................................................................33 3.2.3. SSID ....................................................................................................................34 3.2.4. TX Rate ...............................................................................................................34 3.2.5. Hidden AP...........................................................................................................34 3.2.6. No Encryption.....................................................................................................35 4. Dual-band Configuration............................................................................................................36 4.1. Related MIB................................................................................................................36 4.2. Examples ....................................................................................................................37 4.2.1. Setting as 5G Single MAC/PHY selective mode..................................................37 4.2.2. Setting as 2G Single MAC/PHY selective mode..................................................38 4.2.3. Setting as the Dual MAC/PHY concurrent mode................................................38 5. Security Policy ............................................................................................................................40 5.1. WEP ............................................................................................................................40 5.1.1. Related MIB........................................................................................................40 5.1.2. WEP 64 example ................................................................................................40 5.1.3. WEP 128 example ..............................................................................................40 5.2. WPA/WPA2 PSK..........................................................................................................41 5.2.1. Related MIB........................................................................................................41 5.2.2. WPA AES example ..............................................................................................41 5.2.3. WPA TKIP example .............................................................................................41 5.2.4. WPA2 AES example ............................................................................................42 5.2.5. WPA2 TKIP example ...........................................................................................42 5.2.6. WPA/WPA2 AES mixed mode example ..............................................................42 5.2.7. WPA/WPA2 TKIP mixed mode example .............................................................42 5.2.8. WPA/WPA2 auto mixed mode example.............................................................43 5.3. Mix Security Setting for Client Mode .........................................................................43 5.3.1. Related MIB........................................................................................................44 6. Dynamic Frequency Selection (DFS) ..........................................................................................45 7. Multiple BSSID............................................................................................................................45 7.1. Related MIB................................................................................................................45 7.2. Example of Setup .......................................................................................................46 7.2.1. Enable MBSSID feature and Open two VAP interfaces ......................................46 7.2.2. Stop one VAP interface.......................................................................................47 7.2.3. Disable MBSSID feature and stop two VAP interfaces .......................................47 7.2.4. Set VAP SSID .......................................................................................................47 7.3. Important Notes.........................................................................................................47 8. WMM .........................................................................................................................................49 8.1. Feature Description....................................................................................................49 8.2. Related MIB................................................................................................................49 9. WDS............................................................................................................................................50 9.1. Feature Description....................................................................................................50 9.2. Related MIB................................................................................................................50 9.3. WDS Example .............................................................................................................51 9.3.1. WDS with No Encryption Example .....................................................................51 9.3.2. WDS with WEP 64 bit Encryption Example........................................................51 9.3.3. WDS with AES Encryption Example....................................................................52 9.4. Important Notes.........................................................................................................53 10. 802.1X ................................................................................................................................54 10.1. System Architecture ...................................................................................................54 10.2. 802.1X Related Daemons Introduction ......................................................................54 10.2.1. iwcontrol Daemon Introduction.........................................................................54 10.2.2. 802.1X Daemon Introduction.............................................................................55 10.3. 802.1X Start Procedure ..............................................................................................55 10.4. WPA Config File..........................................................................................................55 10.4.1. Config File Related Parameters ..........................................................................55 10.5. 802.1X Example..........................................................................................................57 10.5.1. 802.1X with WPA AES Example ..........................................................................57 10.5.2. 802.1X with WPA2 AES Example ........................................................................58 10.5.3. 802.1X with WPA/WPA2 AES/TKIP mixed mode Example .................................58 11. IAPP ....................................................................................................................................60 12. WPS ....................................................................................................................................60 13. IGMP Snooping...................................................................................................................61 13.1. The process flow of IGMP snooping ..........................................................................61 13.2. Related MIB................................................................................................................62 13.3. IGMP snooping Example ............................................................................................62 14. Multiple AP profile .............................................................................................................63 14.1. Related MIB................................................................................................................63 14.2. How to debug.............................................................................................................65 15. Mesh...................................................................................................................................66 15.1. Related MIB................................................................................................................66 15.2. Pathsel Deamon .........................................................................................................67 15.3. Example......................................................................................................................67 15.3.1. Enable Mesh.......................................................................................................67 15.3.2. Disable Mesh......................................................................................................68 15.3.3. Enable Dual-Band Mesh.....................................................................................68 15.3.4. Disable Dual-Band Mesh ....................................................................................69 15.4. Debug and Web Information .....................................................................................69 16. Mass Production ................................................................................................................70 17. Other User Space Utilities ..................................................................................................70 17.1. iwpriv Utility...............................................................................................................70 17.1.1. Read WLAN register ...........................................................................................70 17.1.2. Write WLAN register ..........................................................................................70 17.1.3. Read WLAN memory..........................................................................................70 17.1.4. Write WLAN memory.........................................................................................70 17.2. Proc Files ....................................................................................................................71 17.3. IOCTL ..........................................................................................................................72 18. Hardware Limitation ..........................................................................................................75 18.1. Limitation ...................................................................................................................75 19. 802.11R Support ................................................................................................................76 19.1.1. Enable fast roaming............................................................................................76 19.1.2. Disable fast roaming...........................................................................................76 19.1.3. Debug information of fast roaming....................................................................76
rtl8198D_img_支持nattype修改固件.tar
10-25
rtl8198d+8812F+8192F 支持nattype设置固件 /proc/conenat This proc is used to select the nat type : 1. echo 0 > /proc/conenat, it is symmetric nat; 2. echo 1 > /proc/conenat, it is full cone nat; 3. echo 2 > /proc/conenat, it is restricted cone nat; 4. echo 3 > /proc/conenat, it is port restricted cone nat.
Realtek APRouter SDK Advisory CVE-2021-35392~35395（buffer_overflow_vulnerabilities）
wgl307293845的博客
11-11 1286
CEV列表 CEV-2021-25392 CEV-2021-25393 CEV-2021-25394 CEV-2021-25395
4GDTU工业路由器SDK二次开发与linux系统程序的结合应用 华杰智控
深圳华杰智控
12-13 2462
DTU工业路由器SDK二次开发linux系统，是自带编译环境和各种库文件，SSH登录后可以直接编译软件， 编译好了后直接运行。支持C、C++、Python、PHP等语言进行编程，同时支持MySQL，SQlite数据。 支持4G全网通，工业串口RS232和RS485，以太网和WIFI等。 开放式4GDTU工业路由器和串口服务器的SDK接口，用户可以编译自己的程序，进行二次开发， 借助二次开发，用户可...
RTL8197FH_VG+8812F+8367R(基于realtek 3.4.14b sdk)出现configure: error: in `/rtl819x/users/iptables-1.4.4
wgl307293845的博客
05-13 542
问题log make[3]: Entering directory `/rtl819x/users/iptables-1.4.4' /bin/sh ./config.status --recheck running CONFIG_SHELL=/bin/sh /bin/sh ./configure --host=mips-linux --with-ksource=/home/luke_wang/branch-rtl819x-sdk-v3.4/linux-2.6.30 --enable-static --d
评论 5
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值