android bluetooth开发基础-7管理连接

Managing a Connection

When you have successfully connected two (or more) devices, each one will have a connectedBluetoothSocket. This is where the fun begins because you can share data between devices. Using theBluetoothSocket, the general procedure to transfer arbitrary data is simple:

1. Get the InputStream and OutputStream that handle transmissions through the socket, viagetInputStream() and getOutputStream(), respectively.
2. Read and write data to the streams with read(byte[]) and write(byte[]).

That's it.

There are, of course, implementation details to consider. First and foremost, you should use a dedicated thread for all stream reading and writing. This is important because both read(byte[]) andwrite(byte[]) methods are blocking calls. read(byte[]) will block until there is something to read from the stream. write(byte[]) does not usually block, but can block for flow control if the remote device is not calling read(byte[]) quickly enough and the intermediate buffers are full. So, your main loop in the thread should be dedicated to reading from the InputStream. A separate public method in the thread can be used to initiate writes to the OutputStream.

Example

Here's an example of how this might look:

private class ConnectedThread extends Thread {
    private final BluetoothSocket mmSocket;
    private final InputStream mmInStream;
    private final OutputStream mmOutStream;

    public ConnectedThread(BluetoothSocket socket) {
        mmSocket = socket;
        InputStream tmpIn = null;
        OutputStream tmpOut = null;

        // Get the input and output streams, using temp objects because
        // member streams are final
        try {
            tmpIn = socket.getInputStream();
            tmpOut = socket.getOutputStream();
        } catch (IOException e) { }

        mmInStream = tmpIn;
        mmOutStream = tmpOut;
    }

    public void run() {
        byte[] buffer = new byte[1024];  // buffer store for the stream
        int bytes; // bytes returned from read()

        // Keep listening to the InputStream until an exception occurs
        while (true) {
            try {
                // Read from the InputStream
                bytes = mmInStream.read(buffer);
                // Send the obtained bytes to the UI Activity
                mHandler.obtainMessage(MESSAGE_READ, bytes, -1, buffer)
                        .sendToTarget();
            } catch (IOException e) {
                break;
            }
        }
    }

    /* Call this from the main Activity to send data to the remote device */
    public void write(byte[] bytes) {
        try {
            mmOutStream.write(bytes);
        } catch (IOException e) { }
    }

    /* Call this from the main Activity to shutdown the connection */
    public void cancel() {
        try {
            mmSocket.close();
        } catch (IOException e) { }
    }
}

The constructor acquires the necessary streams and once executed, the thread will wait for data to come through the InputStream. When read(byte[]) returns with bytes from the stream, the data is sent to the main Activity using a member Handler from the parent class. Then it goes back and waits for more bytes from the stream.

Sending outgoing data is as simple as calling the thread's write() method from the main Activity and passing in the bytes to be sent. This method then simply calls write(byte[]) to send the data to the remote device.

The thread's cancel() method is important so that the connection can be terminated at any time by closing the BluetoothSocket. This should always be called when you're done using the Bluetooth connection.