Assignment 1
COMP30026 Models of Computation
School of Computing and Information Systems
Due: Friday 30 August at 8:00pm
Aims
To improve your understanding of propositional logic and first-order predicate
logic, including their use in mechanised reasoning; to develop your skills in
analysis and formal reasoning about complex concepts, and to practise writing
down formal arguments with clarity.
Marking
Each question is worth 2 marks, for a total of 12. We aim to ensure that
anyone with a basic comprehension of the subject matter receives a passing
mark. Getting full marks is intended to be considerably more difficult; the
harder questions provide an opportunity for students to distinguish themselves.
Your answers will be marked on correctness and clarity. Do not leave us
guessing! It is better to be clear and wrong; vague answers will attract few
if any marks. This also means you must show your working in mechanical
questions!
Finally, make sure your writing is legible! We cannot mark what we cannot
read. (Keep in mind that the exam will be on paper, so this will be even more
important later!)
Academic Integrity
In this assignment, individual work is called for. By submitting work for
assessment you declare that:
1. You understand the University s policy on academic integrity.
2. The work submitted is your original work.
3. You have not been unduly assisted by any other person or third party.
4. You have not unduly assisted anyone else.
5. You have not used any unauthorized materials, including but not limited
to AI and translation software.
1
However, if you get stuck, you can use the discussion board to ask any ques-
tions you have. If your question reveals anything about your approach or work-
ing, please make sure that it is set to private .
You may only discuss the assignment in basic terms with your peers (e.g.
clarifying what the question is asking, or recommending useful exercises). You
may not directly help others in solving these problems, even by suggesting
strategies.
Soliciting or accepting further help from non-staff is cheating and will lead
to disciplinary action.
Q1 Propositional Logic: Island Puzzle
You come across three inhabitants of the Island of Knights and Knaves. Now, a
mimic has eaten one of them and stolen their appearance, as well as their status
as a knight or knave. (And is thus bound by the same rules. Remember that
knights always tell the truth, and knaves always lie!)
Each makes a statement:
1. A says: C is either the mimic or a knight, or both.
2. B says: It is not the case that both A is the mimic and C is a knave.
3. C says: If B is a knight, then the mimic is a knave.
Task A
Translate the information above into propositional formulas. Give an appropri-
ate interpretation of all propositional letters used. Use the same interpretation
throughout the question; do not give multiple interpretations.
Task B
Determine which of , , and is the mimic, and prove that it must be the
case using an informal argument.
Some advice: A good answer should not be much longer than about 250
words. But do not worry about the length of your first draft! Instead focus on
finding a proof in the first place. Once you have that, it is much easier to find a
shorter proof. Also, remember that clarity is key: write in complete sentences
with good grammar, but do not include irrelevant information or repeat yourself
unnecessarily.
Q2 Propositional Logic:
Validity and Satisfiability
For each of the following propositional formulas, determine whether it is valid,
unsatisfiable, or contingent. If it is valid or unsatisfiable, prove it by drawing
an appropriate resolution refutation. If it is contingent, demonstrate this with
two appropriate truth assignments.
1. ? ( ?)
2
2. ( ( ( ))) (? ?(? ?))
3. ?(( ) ) ( ? ) ( ?)
4. ( ? ) (( ) ? ( ? ))
Hint: If you are unsure, you can use a truth table to help you decide!
Q3 Predicate Logic: Translation and Seman-
tics
Task A
Translate the following English sentences into formulas of predicate logic. Give
an appropriate interpretation of any non-logical symbols used. Use the same
interpretation throughout this question; do not give multiple interpretations.
1. Iron is heavier than oxygen.
2. All actinides are radioactive.
3. Some, but not all, lanthanides are radioactive.
4. Actinides are heavier than lanthanides.
5. Both lanthanides and actinides are heavier than iron and oxygen.
6. At least three isotopes of lanthanides are radioactive, but the only lan-
thanide without any non-radioactive isotopes is promethium.
Task B
By arguing from the semantics of predicate logic, prove that the universe of
every model of following formula has at least 3 distinct elements. (Resolution
refutations will receive 0 marks.)
??((, ) ?(, )) ??((, ))
Q4 Predicate Logic: Red-Black Trees
The use of function symbols in our notation for predicate logic allows us to
create a simple representation of binary trees. Namely, let the constant symbol
represent the root node of the tree, and the unary functions and represent
the left and right children of a node. The idea is that () is the left child of the
root node, (()) is the right child of the left child of the root node, and so on.
With this representation defined, we can now prove statements about trees.
A red-black tree is a special type of binary tree that can be searched faster,
in which each node is assigned a colour, either red or black. Let the predicates
and denote whether a node is red or black respectively. A red-black tree is
faster to search because it must satisfy some constraints, two of which are:
3
1. Every node is red or black, but not both:
?((() ?()) (() ?())) (1)
2. A red node does not have a red child:
?(() (?(()) ?(()))) (2)
Task
Use resolution to prove that these two conditions entail that a tree consisting
of a non-black root with a red left child is not a red-black tree.
Q5 Informal Proof: Palindromes
Assume the following definitions:
1. A string is a finite sequence of symbols.
2. Given a symbol , we write the string consisting of just also as .
3. Given strings and , we write their concatenation as .
4. Given a collection of symbols 1, , , we have the following:
(a) The expression 1 stands for the string of symbols whose th
symbol is equal to for all integers from 1 to .
(b) The reverse of the empty string is the empty string.
(c) The reverse of a nonempty string 1 of length is the string
1 where = ?+1 for all positive integers .
(d) The expression 1 stands for the reverse of 1 .
5. A string is a palindrome if and only if it is equal to its reverse.
Task
The proof attempt below has problems. In particular, it does not carefully
argue from these definitions. Identify and describe the problems with the proof.
Then, give a corrected proof.
Theorem. Let be a palindrome. Then is also a palindrome.
Proof (attempt). We have = 1 for some symbols 1, , where is
the length of . Since is a palindrome, it is by definition equal to itself under
reversal, so = 1 and = ?+1 for all positive integers .
Therefore = 1 1, and hence there exist symbols 1, , 2
such that = 1 2. Since the reverse of 1 1 is itself, it follows
that is a palindrome, as desired.
4
d f g h ie
b
a
c
Figure 1: Diagram of our 9-segment display. Colour key: horizontal segments
are blue, vertical segments are green, and diagonal segments are orange.
Q6 Propositional Logic: Logic on Display
One common practical application of propositional logic is in representing logic
circuits. Consider a 9-segment LED display with the segments labelled a through
i, like the one shown on Figure 1. To display the letter E , for example, you
would turn on LEDs , , , and , and turn the rest off.
Arrays of similar displays are commonly used to show numbers on digital
clocks, dishwashers, and other devices. Each LED segment can be turned on or
off, but in most applications, only a small number of on/off combinations are of
interest (e.g. displaying a digit in the range 0 C9 only uses 10 combinations). In
that case, the display can be controlled through a small number of input wires.
For this question, we are interested in creating a display for eight symbols
from the proto-science of alchemy. Since we only want eight different symbols
(see Figure 2), we only need three input wires: , , and .
Figure 2: Table of symbols, their encodings in terms of , and , and the
corresponding on/off state of the segments C.
So, for example, is represented by = = = 0, and so when all three
wires are unpowered, we should turn on segments , and ? and turn off the
other segments. Similarly, is represented by = = 0 and = 1, so when
wires and are off and the wire is on, we should turn on , and , and
turn off the other segments.
5
Note that each of the display segments C can be considered a propositional
function of the variables , , and . For example, segment e is on when the
input is one of 101, 110, or 111, and is off otherwise. That is, we can capture
its behavior as the following propositional formula:
( ? ) ( ?) ( ).
The logic display must be implemented with logic circuitry. Here we assume
that only three types of logic gates are available:
1. An and-gate takes two inputs and produces, as output, the conjunction
( ) of the inputs.
2. An or-gate implements disjunction ( ).
3. An inverter takes a single input and negates (?) it.
Task
Design a logic circuit for each of C using as few gates as possible. Your answer
does not need to be optimal1 to receive full marks, but it must improve upon
the trivial answer. (Incorrect answers will receive 0 marks.)
We can specify the circuit by writing down the Boolean equations for each
of the outputs C. For example, from what we just saw, we can define
= ( ? ) ( ?) ( )
and thus implement using 10 gates. But the formula ( ? ) ( )
is equivalent, so we can in fact implement using 5 gates.
Moreover, the nine functions might be able to share some circuitry. For
example, if we have a sub-circuit defined by = ? , then we can define
= ( ? ?), and also possibly reuse in other definitions. That is,
we can share sub-circuits among multiple functions. This can allow us to reduce
the total number of gates. You can define as many helper sub-circuits as you
please, to create the smallest possible solution.
Submission
Go to Assignment 1 (Q6) on Gradescope, and submit a text file named q6.txt
consisting of one line per definition. This file will be tested automatically, so it
is important that you follow the syntax exactly.
We write ? as - and as +. We write as ., or, simpler, we just leave it
out, so that concatenation of expressions denotes their conjunction. Here is an
example set of equations (for a different problem):
# An example of a set of equations in the correct format:
a = -Q R + Q -R + P -Q -R
b = u + P (Q + R)
c = P + -(Q R)
d = u + P a
u = -P -Q
# u is an auxiliary function introduced to simplify b and d
1Indeed, computing an optimal solution to this problem is extremely difficult!
6
Empty lines, and lines that start with # , are ignored. Input variables are
in upper case. Negation binds tighter than conjunction, which in turn binds
tighter than disjunction. So the equation for says that = (? ) (
?) ( ? ?). Note the use of a helper function , allowing and
to share some circuitry. Also note that we do not allow any feedback loops
in the circuit. In the example above, depends on , so is not allowed to
depend, directly or indirectly, on (and indeed it does not).
相关推荐
四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar
四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar
COMP30023 Computer Systems - Lec 1
由于自学缺乏一个交流的环境,我觉得将自己的学习所得总结下来,以便日后分享交流。
Delphi 13.2控件之msquic4d.rar
Delphi 13.2控件之msquic4d.rar
初识Haskell
在COMP30026 Models of Computation中接触了新的编程语言Haskell,一个之前听都没有听过的语言,在此记录关于Haskell的一些最基本概念。 1.Haskell是一个函数式编程语言(functional programming language),函数式编程语言最基本的操作是function application。 2.GHC(the Glasgow Ha...
企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx
企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx
智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx
智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx
【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c
AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。
气象服务行业可信数据空间应用规划方案(技术方案版).pptx
气象服务行业可信数据空间应用规划方案(技术方案版).pptx
MCGS的Http协议驱动,支持http协议
硬件配置 参数设置 设备属性 设备命令 通讯状态 附录 #HTTP 1、 设备简介 驱动类型 该驱动为独立设备,直接添加构件即可,不需要挂载到父设备下 通讯协议 采用标准HTTP1.1协议 通讯方式 驱动构件为客户端。 2、 硬件连接 本软件在通讯之前,请保证通讯连接正确。通讯连接方式:采用标准的RJ45接口的以太网接线(对调网线或使用HUB交换)。 3、 设备通讯参数 本设备为独立设备,无父设备参数 4、 设备构件参数设置 “HTTP设备”参数设置如下: <1> 内部属性: 构建url信息。 <2> 最小采集周期:本软件对设备进行操作的时间周期,单位为ms,默认为100ms。 <3> 通讯等待时间:通讯数据接收等待时间,默认设置为200ms,当采集速度要求较高或数据量较大时,设置值可适当减小或增大。 <4> HttpHead:http head添加需要的字段,不需要添加http head时值为空,默认不添加。 5、 设备命令 本设备构件提供设备命令,用于进行相应的操作,设备命令的格式如下: 设备命令 命令介绍 GetHttpHead 格式1 GetHttpHead(headStr) 用途 获取http head参数 参数 headStr 参数可以为字符型变量、字符串常量 例1 !SetDevice(设备0,6,"GetHttpHead(headStr)") 获取http head数据保存到headStr中 SetHttpHead 格式1 SetHttpHead(headStr) 用途 设置http head参数 参数 headStr 参数可以为字符型变量、字符串常量
机器视觉检测实战教程 19页成品课程光源选型Halcon标定海康相机VisionPro
内容概要:机器视觉检测实战教程,19页6章成品课程PDF:视觉检测光源选型对照表+五个翻车案例、Halcon模板匹配create_shape_model七参数整定、视觉标定三类(9点/旋转/手眼)、海康工业相机C#取图黑图丢帧排坑、VisionPro QuickBuild部署License迁移C#宿主、远心镜头选型。含C#/Halcon代码与现场案例。适用人群:机器视觉工程师、自动化检测开发、企业内训。使用场景:视觉方案设计、选型、标定部署、团队培训。原创整理。
【医疗器械制造】基于酸碱腐蚀环境的一次性乳胶手套铝合金手模失效机理分析与量产风险控制
内容概要:本文围绕一次性医用乳胶手套生产中使用的铝合金手模在酸碱环境下的失效风险展开系统性分析,重点探讨其在外表面腐蚀、清洗循环、氯介质侵入及表面粗糙度控制等方面的工程挑战。研究表明,尽管市场上已有带涂层的铝合金手模供应,但其能否在强碱、酸洗、毛刷摩擦、冷热交变和氯共存的复杂工况下长期维持Ra 1.0—2.5 μm的表面质量并实现稳定脱模,仍需经过严格的多阶段验证。常规阳极氧化+PTFE涂层方案已被实测排除,而316L不锈钢筒体在湿氯环境中出现的三个月内腐蚀失效案例提示必须重视内腔隔离设计。文章强调,采购决策应基于“小批量试制—离线加速试验—影子生产验证—条件性放行”的四阶段准入机制,结合表面参数、工艺相容性、手套成品性能与全生命周期成本进行综合评估,避免依赖供应商宣传数据。; 适合人群:从事医疗器械制造、材料工程、设备采购与工艺质量管理的技术人员及决策管理者,尤其是涉及乳胶手套生产线优化与手模选型的相关从业人员。; 使用场景及目标:①评估铝合金手模替代陶瓷手模的技术可行性与风险边界;②建立手模选型的系统验证流程,防范因表面失效导致的脱模异常、手套缺陷与非计划停机;③指导采购合同中技术条款的制定,确保供应商交付具备可验证数据支撑; 阅读建议:此资源以工程实证为导向,建议读者结合自身产线工艺参数,重点关注外表面Ra控制、内腔双密封设计、影子生产验证方法及失效链追溯体系的构建,在试制阶段严格执行多维度联合判定标准,审慎推进规模化替代。
【DBO三维路径规划】基于多策略改进的蜣螂算法MSDBO多无人机协同集群避障路径规划(目标函数:最低成本:路径、高度、威胁、转角)研究(Matlab代码实现)
内容概要:本文研究了基于多策略改进的蜣螂优化算法(MSDBO)在多无人机协同集群三维路径规划中的应用,旨在解决复杂三维环境下的避障与最优路径搜索问题。通过构建包含路径长度、飞行高度、威胁规避和转弯角度的综合成本目标函数,利用MSDBO算法对多无人机系统的飞行轨迹进行全局优化,实现在保证安全性与稳定性的前提下达到最低能耗与最优性能的目标。文中详细阐述了算法的多策略改进机制、三维环境建模方法以及多无人机协同避障策略,并通过Matlab仿真平台验证了该方法相较于传统优化算法在收敛速度、路径质量和鲁棒性方面的优越性能。; 适合人群:具备一定优化算法理论基础和无人机控制系统知识的科研人员及研究生,特别适用于从事智能优化算法、多智能体协同控制、路径规划与自主导航等相关领域的研究人员和技术开发者。; 使用场景及目标:①应用于灾害救援、军事侦察、智能巡检等复杂三维场景中多无人机协同任务的路径规划;②为多目标约束下的路径优化、动态避障与能耗平衡问题提供高效的算法支持与仿真验证工具;③推动智能优化算法在无人系统自主决策与协同控制中的实际应用与工程落地。; 阅读建议:建议读者结合提供的Matlab代码深入理解算法的具体实现过程,重点关注目标函数设计、多策略改进机制(如种群初始化、自适应参数调整、局部搜索增强等)及仿真结果分析部分,同时可尝试将该算法迁移至其他智能优化算法框架中进行对比研究,以深化对路径规划问题本质的理解与实践能力的提升。
【新能源电力系统】项目介绍 MATLAB实现基于GWO-VMD-SSA-LSTM灰狼优化算法(GWO)结合变分模态分解(VMD)、麻雀搜索算法(SSA)及长短期记忆网络(LSTM)进行辐照度-温度驱动
内容概要:本文提出了一种融合灰狼优化算法(GWO)、变分模态分解(VMD)、麻雀搜索算法(SSA)和长短期记忆网络(LSTM)的复合模型(GWO-VMD-SSA-LSTM),用于实现高精度的辐照度-温度驱动短期光伏功率预测。该模型首先通过GWO优化VMD的关键参数(模态数K和惩罚因子α),实现对非平稳光伏功率序列的高效多尺度分解,降低信号复杂性;随后利用SSA对LSTM的超参数(如隐藏层单元数、Dropout率、学习率等)进行智能寻优,提升网络训练效率与泛化能力;最后通过独立LSTM网络对各VMD模态进行预测并重构输出。模型结合了信号分解、智能优化与深度学习优势,显著提升了在多云、阴雨等复杂天气下的预测精度与稳定性,并通过MAE、RMSE、MAPE和R²等指标验证了有效性。文中还提供了完整的MATLAB实现流程,涵盖数据清洗、归一化、滑动窗口构建、参数优化与结果可视化等环节。; 适合人群:具备一定机器学习与时间序列预测基础,从事新能源发电预测、智能电网调度、电力系统自动化等相关领域的科研人员、工程师及研究生。; 使用场景及目标:①解决光伏功率受辐照度、温度等因素影响而导致的强随机性、非平稳性预测难题;②提升短期(15分钟至1小时)光伏出力预测精度,支撑电网经济调度、储能协同控制与电力现货市场申报;③为多源气象数据驱动的可再生能源预测提供可扩展的技术框架。; 阅读建议:建议结合提供的MATLAB代码逐步实践,重点关注GWO与SSA的优化机制、VMD分解效果及其与LSTM的集成方式,注意避免时间泄漏问题,推荐在实际数据上复现实验以深入理解模型性能。
【CEEMDAN-VMD-GRU】完备集合经验模态分解-变分模态分解-门控循环单元预测研究(Python代码实现)
内容概要:本文提出了一种融合完备集合经验模态分解(CEEMDAN)、变分模态分解(VMD)与门控循环单元(GRU)的复合预测模型,旨在提升对复杂非平稳时间序列的预测精度。首先利用CEEMDAN对原始信号进行自适应分解,有效缓解模态混叠问题,获得一组本征模态函数(IMFs);随后引入VMD对关键模态分量作进一步优化分解,增强特征分离能力,降低噪声干扰;最后将处理后的平滑分量分别输入GRU神经网络进行独立训练与预测,并通过加权集成策略融合各分量输出,得到最终高精度预测结果。该方法结合了多尺度信号分解与深度学习的优势,显著提升了模型在处理强噪声、非线性、非平稳序列(如电力负荷、风速、光伏发电功率等)时的泛化能力和预测稳定性,文中提供了完整的Python代码实现,便于复现与应用。; 适合人群:具备一定Python编程基础和机器学习理论知识,从事科研或工程应用的硕士、博士研究生及科研人员,尤其适用于能源系统预测、智能电网调度、可再生能源管理、信号处理与时间序列分析等相关领域的研究人员和技术开发者。; 使用场景及目标:①解决传统单一预测模型在面对复杂非平稳时间序列时存在的过拟合、收敛慢、精度低等问题;②通过多阶段信号分解降低原始序列的复杂度与不确定性,提升GRU模型的训练效率与预测鲁棒性;③为电力系统负荷预测、新能源出力预报、设备运行状态预警及市场交易策略制定等关键任务提供高精度数据支撑。; 阅读建议:建议读者结合提供的Python代码逐模块理解算法实现流程,重点关注CEEMDAN与VMD的参数配置对信号分解效果的影响,尝试在不同数据集上进行实验对比,并通过可视化手段分析各模态分量的物理意义,进一步掌握模型调优与性能评估的方法。
T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx
T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx
T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx
T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx
无人机路径规划中多种优化算法的仿真研究(Matlab代码实现)
内容概要:本文围绕无人机三维路径规划问题,系统研究了多种智能优化算法在复杂环境下的仿真应用与性能对比,重点实现了改进灰狼优化算法(I-GWO)、标准灰狼优化算法(GWO)、金鹰优化算法(GJO)和正弦余弦算法(SCA)的Matlab代码实现。通过构建包含路径长度、飞行高度、威胁规避及转弯角度等多维度目标函数的综合评价体系,对各算法在单无人机路径优化与多无人机协同集群避障场景中的表现进行全面仿真分析,评估其路径规划能力、收敛速度与鲁棒性。研究旨在实现最低综合成本的飞行路径,并为多智能体协同任务提供可靠的算法支撑。; 适合人群:具备一定Matlab编程基础,从事无人机系统设计、智能优化算法研究、路径规划及相关自动化、人工智能领域的科研人员、工程技术人员及研究生。; 使用场景及目标:① 掌握主流智能优化算法在三维空间路径规划中的具体建模与实现方法;② 对比分析不同算法在路径优化质量、计算效率、避障能力和多目标权衡方面的性能差异;③ 为多无人机协同执行侦察、监测、救援等任务提供高效的路径规划解决方案与仿真验证平台。; 阅读建议:建议结合文中提供的Matlab代码进行动手实践,重点关注算法参数调优、目标函数设计以及环境障碍物建模对最终路径的影响,可进一步扩展至动态障碍环境或加入通信约束以适应更复杂的实际应用场景。
ZYNQ出现问题及解决办法汇总(一直更新)
问题目录使用软件及开发板版本一,vitis在build project时卡住。二,Could not find FPGA device on the board for connection 'Local'三,FPGA configuration failed:DONE PIN is not high四,Could not find ARM device on the board for connection 'Local' 使用软件及开发板版本 开发板:MZ7XA-7020 软件:vitis2020.2(
405



被折叠的 条评论
为什么被折叠?



