COMP3702 Artificial Intelligence BeeBot MDP

【能源系统优化】基于NSGA-II的储能容量配置模型:多目标优化与全寿命周期成本分析 项目介绍 MATLAB 储能容量配多大?NSGA-II优化与寿命成本情景分析 内容概要:本文介绍了一个基于MATLAB的储能容量配置优化项目,通过NSGA-II多目标优化算法,综合考虑储能系统的全寿命周期成本、供电可靠性与新能源消纳能力,构建了包含数据生成、储能运行仿真、寿命衰减建模、多目标优化与决策分析的一体化模型框架。项目生成50000条多维随机数据,涵盖负荷、新能源出力、电价、温度与电池运行压力,并建立储能能量容量、功率与备用SOC的协同配置模型。通过时序仿真计算充放电行为、等效循环次数与容量衰减,结合初始投资、运行收益、更换成本与惩罚项,构建全生命周期经济评价体系。NSGA-II算法用于求解成本、供电可靠性与碳排放之间的Pareto最优前沿,支持多情景对比分析,如电价波动、负荷增长与寿命衰减加剧等,最终输出推荐配置与可视化结果,为储能工程选型提供量化依据。; 适合人群:具备一定MATLAB编程基础,从事电力系统规划、储能系统设计、新能源集成或优化算法研究的科研人员与工程技术人员,尤其适用于研究生、能源领域研发工程师及项目规划人员。; 使用场景及目标:①解决“储能容量配多大”这一实际工程问题,优化容量与功率的协同配置;②评估不同电价、负荷、气候与政策情景下储能方案的经济性与鲁棒性;③分析寿命衰减对长期成本的影响,避免“低投入高维护”的不合理配置;④为新能源电站、微电网、工业园区等场景的储能规划提供Pareto最优解集与决策支持。; 阅读建议:此资源侧重于模型构建与算法实现,建议读者结合提供的代码示例深入理解NSGA-II在储能优化中的应用,重点关注目标函数设计、寿命成本建模与多情景分析逻辑。建议运行数据生成与优化代码,调试并可视化结果,以掌握从数据到决策的完整流程。 立即下载


COMP3702 Artificial Intelligence (Semester 2, 2024)
Assignment 2: BeeBot MDP
Key information:
• Due: 1pm, Friday 20 September 2024
• This assignment assesses your skills in developing discrete search techniques for challenging problems.
• Assignment 1 contributes 20% to your final grade.
• This assignment consists of two parts: (1) programming and (2) a report.
• This is an individual assignment.
• Both code and report are to be submitted via Gradescope (https://www.gradescope.com/). You
can find a link to the COMP3702 Gradescope site on Blackboard.
• Your code (Part 1) will be graded using the Gradescope code autograder, using the testcases in the
support code provided at https://github.com/comp3702/2024-Assignment-2-Support-Code.
• Your report (Part 2) should fit the template provided, be in .pdf format and named according to the
format a2-COMP3702-[SID].pdf. Reports will be graded by the teaching team.
The BeeBot AI Environment
You have been tasked with developing a planning algorithm for automatically controlling BeeBot, a Bee
which operates in a hexagonal environment, and has the capability to push, pull and rotate honey ‘Widgets’
in order to reposition them to target honeycomb locations. To aid you in this task, we have provided support
code for the BeeBot environment which you will interface with to develop your solution. To optimally solve
a level, your AI agent must efficiently find a sequence of actions so that every Target cell is occupied by part
of a Widget, while incurring the minimum possible action cost.
For A2, the BeeBot environment has been extended to model non-deterministic outcomes of actions. Cost
and action validity are now replaced by a reward function where action costs are represented by negative
received rewards, with additional penalties (i.e., negative rewards) being incurred when a collision occurs
(between the Bee or a honey Widget and an obstacle, or between Widgets). Updates to the game environment
are indicated in pink font.
Levels in BeeBot are composed of a Hexagonal grid of cells, where each cell contains a character representing
the cell type. An example game level is shown in Figure 1.
1COMP3702 Assignment 2: BeeBot MDP
Figure 1: Example game level of BeeBot, showing character-based and GUI visualiser representations
Environment representation
Hexagonal Grid
The environment is represented by a hexagonal grid. Each cell of the hex grid is indexed by (row, column)
coordinates. The hex grid is indexed top to bottom, left to right. That is, the top left corner has coordinates
(0, 0) and the bottom right corner has coordinates (nrows − 1, ncols − 1). Even numbered columns (starting
from zero) are in the top half of the row, and odd numbered columns are in the bottom half of the row. An
example is shown in Figure 2.
Figure 2: Example hexagonal grid showing the order that rows and columns are indexed
Two cells in the hex grid are considered adjacent if they share an edge. For each non-border cell, there are 6
adjacent cells.
The BeeBot Agent and its Actions
The BeeBot Bee occupies a single cell in the hex grid. In the visualisation, the Bee is represented by the
cell marked with the character ‘R’ (or the Bee in the graphical visualiser). The side of the cell marked with
‘*’ (or the arrow in the graphical visualiser) represents the front of the Bee. The state of the Bee is defined
by its (row, column) coordinates and its orientation (i.e. the direction its front side is pointing towards).
At each time step, the agent is prompted to select an action. The Bee has 4 available nominal actions:
• Forward → move to the adjacent cell in the direction of the front of the Bee (keeping the same
orientation)
• Reverse → move to the adjacent cell in the opposite direction to the front of the Bee (keeping the same
orientation)
• Spin Left → rotate left (relative to the Bee’s front, i.e. counterclockwise) by 60 degrees (staying in the
same cell)
• Spin Right → rotate right (i.e. clockwise) by 60 degrees (staying in the same cell)
Page 2COMP3702 Assignment 2: BeeBot MDP
Each time the Bee selects an action, there is a fixed probability (given as a parameter of each testcase) for
the Bee to ‘drift’ by 60 degrees in a clockwise or counterclockwise direction (separate probabilities for each
drift direction) before the selected nominal action is performed. The probability of drift occurring depends on
which nominal action is selected, with some actions more likely to result in drift. Drifting CW and CCW are
mutually exclusive events.
Additionally, there is a fixed probability (also given as a parameter of each testcase) for the Bee to ‘double
move’, i.e. perform the nominal selected action twice. The probability of a double move occurring depends
on which action is selected. Double movement may occur simultaneously with drift (CW or CCW).
The reward received after each action is the minimum/most negative out of the rewards received for the
nominal action and any additional (drift/double move) actions.
The Bee is equipped with a gripper on its front side which allows it to manipulate honey Widgets. When the
Bee is positioned with its front side adjacent to a honey Widget, performing the ‘Forward’ action will result in
the Widget being pushed, while performing the ‘Reverse’ action will result in the honey Widget being pulled.
Action Costs
Each action has an associated cost, representing the amount of energy used by performing that action.
If the Bee moves without pushing or pulling a honey widget, the cost of the action is given by a base action
cost, ACTION_BASE_COST[a] where ‘a’ is the action that was performed.
If the Bee pushes or pulls a honey widget, an additional cost of ACTION_PUSH_COST[a] is added on top, so
the total cost is ACTION_BASE_COST[a] + ACTION_PUSH_COST[a].
The costs are detailed in the constants.py file of the support code:
ACTION_BASE_COST = {FORWARD: 1.0, REVERSE: 1.0, SPIN_LEFT: 0.1, SPIN_RIGHT: 0.1}
ACTION_PUSH_COST = {FORWARD: 0.8, REVERSE: 0.5, SPIN_LEFT: 0.0, SPIN_RIGHT: 0.0}
Obstacles
Some cells in the hex grid are obstacles. In the visualisation, these cells are filled with the character ‘X’
(represented as black cells in the graphical visualiser). Any action which causes the Bee or any part of
a honey Widget to enter an obstacle results in collision, causing the agent to receive a negative obstacle
collision penalty as reward. This reward replaces the movement cost which the agent would have otherwise
incurred. The outside boundary of the hex grid behaves in the same way as an obstacle.
Additionally, the environment now contains an additional obstacle type, called ‘thorns’. Thorns behave in the
same way as obstacles, but when collision occurs, a different (larger) penalty is received as the reward. As a
result, avoiding collisions with thorns has greater importance than avoiding collisions with obstacles. Thorns
are represented by ‘!!!’ in the text-based visualisation and red cells in the graphical visualisation.
Widgets
Honey Widgets are objects which occupy multiple cells of the hexagonal grid, and can be rotated and translated
by the BeeBot Bee. The state of each honey widget is defined by its centre position (row, column)
coordinates and its orientation. Honey Widgets have rotational symmetries - orientations which are rotationally
symmetric are considered to be the same.
In the visualisation, each honey Widget in the environment is assigned a unique letter ‘a’, ‘b’, ‘c’, etc. Cells
which are occupied by a honey Widget are marked with the letter assigned to that Widget (surrounded by
round brackets). The centre position of the honey Widget is marked by the uppercase version of the letter,
while all other cells occupied by the widget are marked with the lowercase.
Three honey widget types are possible, called Widget3, Widget4 and Widget5, where the trailing number
denotes the number of cells occupied by the honey Widget. The shapes of these three honey Widget types
and each of their possible orientations are shown in Figures 3 to 5 below.
Page 3COMP3702 Assignment 2: BeeBot MDP
VERTICAL
Figure 5: Widget5
Two types of widget movement are possible – translation (change in centre position) and rotation (change in
orientation).
Translation occurs when the Bee is positioned with its front side adjacent to one of the honey widgets’ cells
such that the Bee’s orientation is in line with the honey widget’s centre position. Translation results in the
centre position of the widget moving in the same direction as the Bee. The orientation of the honey Widget
does not change when translation occurs. Translation can occur when either ‘Forward’ or ‘Reverse’ actions
are performed. For an action which results in translation to be valid, the new position of all cells of the moved
widget must not intersect with the environment boundary, obstacles, the cells of any other honey Widgets or
the Bee’s new position.
Rotation occurs when the Bee’s new position intersects one of the cells of a honey Widget but the Bee’s
orientation does not point towards the centre of that widget. Rotation results in the honey widget spinning
around its centre point, causing the widget to change orientation. The position of the centre point does not
change when rotation occurs. Rotation can only occur for the ‘Forward’ action - performing ‘Reverse’ in a
situation where ‘Forward’ would result in a widget rotation is considered invalid.
The following diagrams show which moves result in translation or rotation for each honey Widget type, with
the arrows indicating directions from which the Bee can push or pull a widget in order to cause a translation
or rotation of the widget. Pushing in a direction which is not marked with an arrow is considered invalid.
Page 4COMP3702 Assignment 2: BeeBot MDP
Forward Translate
Reverse Translate
Forward Rotate CW
Reverse Rotate CCW
Figure 6: Widget3 translations and rotations
Forward Translate
Reverse Translate
Forward Rotate CW
Reverse Rotate CCW
Figure 7: Widget4 translations and rotations
Forward Translate
Reverse Translate
Forward Rotate CW
Reverse Rotate CCW
Figure 8: Widget5 translations and rotations
Page 5COMP3702 Assignment 2: BeeBot MDP
Targets
The hex grid contains a number of ‘target’ honeycomb cells which must be filled with honey. In the visualisation,
these cells are marked with ‘tgt’ (cells coloured in orange in the graphical visualiser). For a BeeBot
environment to be considered solved, each target cell must be occupied by part of a honey Widget. The
number of targets in an environment is always less than or equal to the total number of cells occupied by all
honey Widgets.
Interactive mode
A good way to gain an understanding of the game is to play it. You can play the game to get a feel for
how it works by launching an interactive game session from the terminal with the following command for the
graphical visualiser:
$ python play_game.py <input_file>.txt
or the following command for the command-line ASCII-character based visualiser:
$ python play.py <input_file>.txt
where <input_file>.txt is a valid testcase file (from the support code, with path relative to the current
directory), e.g. testcases/ex1.txt.
Depending on your python installation, you should run the code using python, python3 or py.
In interactive mode, type the symbol for your chosen action (and press enter in the command line version) to
perform the action: press ’W’ to move the Bee forward, ’S’ to move the Bee in reverse, ’A’ to turn the Bee
left (counterclockwise) and ’D’ to turn the Bee right (clockwise). Use ’Q’ to quit the simulation, and ’R’ to
reset the environment to the initial configuration.
Page 6COMP3702 Assignment 2: BeeBot MDP
BeeBot as an MDP
In this assignment, you will write the components of a program to play BeeBot, with the objective of
finding a high-quality solution to the problem using various sequential decision-making algorithms based on
the Markov decision process (MDP) framework. This assignment will test your skills in defining a MDP for a
practical problem and developing effective exact algorithms for MDPs.
What is provided to you
We provide supporting code in Python, in the form of:
1. A class representing BeeBot game map and a number of helper functions
2. A parser method to take an input file (testcase) and convert it into a BeeBot map
3. A tester
4. Testcases to test and evaluate your solution
5. A script to allow you to play BeeBot interactively
6. A solution file template
The support code can be found at: https://github.com/comp3702/2024-Assignment-2-Support-Code.
Autograding of code will be done through Gradescope, so that you can evaluate your submission and continue
to improve it based on this feedback — you are strongly encouraged to make use of this feedback. You can
also test locally using the supplied tester.py file.
Your assignment task
Your task is to develop algorithms for computing policies, and to write a report testing your understanding of
and analysing the performance of your algorithms. You will be graded on both your submitted code (Part
1, 60%) and the report (Part 2, 40%). These percentages will be scaled to the 20% course weighting for
this assessment item.
The provided support code formulates BeeBot as an MDP, and your task is to submit code implementing
the following MDP algorithms:
• Value Iteration (VI)
• Policy Iteration (PI)
Individual testcases specify which strategy (value iteration/policy iteration) will be applied, but you may modify
the strategy specified in your local copy of the test cases for the purpose of comparing the performance of
your two algorithms. Note that any local changes you make to the test cases will not modify the test cases
on Gradescope (against which your programming component will be graded). The difficulty of higher level
testcases will be designed to require a more advanced solution (e.g. linear algebra policy iteration).
Once you have implemented and tested the algorithms above, you are to complete the questions listed in the
section “Part 2 - The Report” and submit the report to Gradescope.
More detail of what is required for the programming and report parts are given below.
Page 7COMP3702 Assignment 2: BeeBot MDP
Part 1 — The programming task
Your program will be graded using the Gradescope autograder, using the testcases in the support code provided
at https://github.com/comp3702/2024-Assignment-2-Support-Code.
Interaction with the testcases and autograder
We now provide you with some details explaining how your code will interact with the testcases and the
autograder (with special thanks to Nick Collins and Aryaman Sharma).
Information on the BeeBot implementation is provided in the Assignment 2 Support Code README.md
and code comments.
Implement your solution using the supplied solution.py template file. You are required to fill in the following
method stubs:
• init (game env)
• vi_initialise()
• vi_is_converged()
• vi_iteration()
• vi_plan_offline()
• vi_get_state_value()
• vi_select_action()
• pi_initialise()
• pi_is_converged()
• pi_iteration()
• pi_plan_offline()
• pi_select_action()
You can add additional helper methods and classes (either in solution.py or in files you create) if you wish.
To ensure your code is handled correctly by the autograder, you should avoid using any try-except blocks in
your implementation of the above methods (as this can interfere with our time-out handling). Refer to the
documentation in solution.py for more details.
Grading rubric for the programming component (total marks: 60/100)
For marking, we will use 6 test cases to evaluate your solution. Each test case uses the algorithm specified
as the solver type. Each test case is scored out of 10.0 marks, in the following four categories:
• Agent successfully reaches the goal
• Total reward
• Time elapsed
• Iterations performed
The 10 marks for each test case are evenly divided amongst the four categories (i.e. 2.5 marks are allocated
for each category in each test case).
• Each test case has targets for total reward, time elapsed, and iterations performed.
• Maximum score is achieved when your program matches or beats the target in each category
• Partial marks are available for up to 1.3x total reward, 2x time elapsed and 1.3x number of iterations
• Total mark for the test case is a weighted sum of the scores for each category
• Total code mark is the sum of the marks for each test case
In addition, there is a hidden test which evaluates the correctness of your computed state-values in Value
Iteration. If your values are found to deviate significantly from the correct values, marks may be deducted
from your Gradescope code score. For the programming component of the assignments, the teaching staff will
conduct interviews with a subset of students about their submissions for the purpose of establishing genuine
authorship, as per the Electronic Course Profile.
Page 8COMP3702 Assignment 2: BeeBot MDP
Part 2 — The report
The report tests your understanding of the methods you have used in your code, and contributes 40/100
of your assignment mark. Please make use of the report templates provided on Blackboard, because
Gradescope makes use of a predefined assignment template. Submit your report via Gradescope, in .pdf format,
and named according to the format a2-COMP3702-[SID].pdf, where SID is your student ID. Reports will be
graded by the teaching team.
Your report task is to answer the questions below, in the report template provided.
Question 1. MDP problem definition (15 marks)
a) Define the State space, Action space, Transition function, and Reward function components of the
BeeBot MDP planning agent as well as where these are represented in your code. Ensure you complete
both parts of the question: (10 marks)
i) Define the four components in relation to BeeBot
ii) Identify where they are represented in your code
b) Describe the purpose of a discount factor in MDPs. (2.5 marks)
c) State and briefly justify what the following dimensions of complexity are for the BeeBot MDP agent:
(2.5 marks)
• Planning Horizon
• Sensing Uncertainty
• Effect Uncertainty
• Computational Limits
• Learning
Refer to the P&M textbook https://artint.info/3e/html/ArtInt3e.Ch1.S5.html for the possible
values and definitions of each dimension, and format your answer in a neatly formatted table with
the following column headings: [Dimension, Value, Justification].
Question 2. Comparison of algorithms and optimisations (15 marks)
This question requires comparison of your implementation of Value iteration (VI) and Policy iteration (PI).
If you did not implement PI, you may receive partial marks for this question by providing insightful relevant
comments on your implementation of VI. For example, if you tried standard VI and asynchronous VI, you may
compare these two approaches for partial marks.
a) Describe your implementations of Value Iteration and Policy Iteration in one sentence each. Include
details such as whether you used asynchronous updates, and how you handled policy evaluation in PI.
(2 marks)
b) Pick three representative testcases to compare the performance of VI and PI, reporting the numerical
values for the following performance measures:
• Time to converge to the solution. (3 marks)
• Number of iterations to converge to the solution. (3 marks)
In order to do this, you’ll need to modify the # solver type in your local copy of the test cases (the
text files in the testcases directory).
You should report the numerical results in a neatly formatted table (not screenshots from your computer
or Gradescope).
c) Discuss the difference between the numbers you found for VI and PI, including any differences observed
between testcases. Explain and provide reasons for why the differences either make sense, or do not
make sense. (7 marks)
Page 9COMP3702 Assignment 2: BeeBot MDP
Question 3. Investigating optimal policy variation (10 marks)
One consideration in the solution of a Markov Decision Process (i.e. the optimal policy) is the trade off between
a risky higher reward vs a lower risk lower reward, which depends on the probabilities of non-deterministic
dynamics of the environment and the rewards associated with certain states and actions.
Consider testcase ex6.txt, which includes a risky (but lower cost) path through the top half of the grid, and
a less risky (but higher cost) path through the bottom half of the grid. Explore how the policy of the agent
changes with thorn penalty and transition probabilities.
If you did not implement PI, you may change the solver type to VI in order to answer this question.
a) Describe how you expect the optimal path to change as the thorn penalty and transition
probabilities change. Use facts about the algorithms and Bellman optimality equation to justify
why you expect these changes to have such effects. (5 marks)
b) Picking three suitable values for thorn penalty and three suitable values for the transition
probabilities, explore how the optimal policy changes over the 9 combinations of these factors.
Present the results in a table, clearly denoting the optimal behaviour (i.e. top/risky, bottom/safe,
something else) for each combination. Do the experimental results align with what you thought should
happen? If not, why?
(5 marks)
References and Generative AI
At the end of your report, you must cite any references (e.g. using IEEE or APA referencing style). If you
utilised Generative AI to assist in producing your code or report, briefly describe what tool you used and how
you used it, citing the version and date. e.g. “This work was corrected using Copilot (Microsoft, https:
//copilot.microsoft.com/) on 30 July 2024.” See the following link: https://guides.library.uq.
edu.au/referencing/chatgpt-and-generative-ai-tools, and read the Academic Misconduct section
for further details.
Page 10COMP3702 Assignment 2: BeeBot MDP
Academic Misconduct
The University defines Academic Misconduct as involving “a range of unethical behaviours that are designed
to give a student an unfair and unearned advantage over their peers.” UQ takes Academic Misconduct very
seriously and any suspected cases will be investigated through the University’s standard policy (https://
ppl.app.uq.edu.au/content/3.60.04-student-integrity-and-misconduct). If you are found guilty,
you may be expelled from the University with no award.
It is the responsibility of the student to ensure that you understand what constitutes Academic Misconduct
and to ensure that you do not break the rules. If you are unclear about what is required, please ask.
In the coding part of COMP3702 assignments, you are allowed to draw on publicly-accessible resources and
provided tutorial solutions, but you must make reference or attribution to its source, in comments next to the
referenced code, and include a list of references you have drawn on in your solution.py docstring.
If you have utilised Generative AI tools such as ChatGPT, you must clearly cite any use of generative AI in
each instance. To reference your use of AI see:
• https://guides.library.uq.edu.au/referencing/chatgpt-and-generative-ai-tools
Failure to reference use of generative AI tools constitutes student misconduct under the Student Code of
Conduct.
It is the responsibility of the student to take reasonable precautions to guard against unauthorised access
by others to his/her work, however stored in whatever format, both before and after assessment. You must
not show your code to, or share your code with, any other student under any circumstances. You must not
post your code to public discussion forums (including Ed Discussion) or save your code in publicly accessible
repositories (check your security settings). You must not look at or copy code from any other student.
All submitted files (code and report) will be subject to electronic plagiarism detection and misconduct proceedings
will be instituted against students where plagiarism or collusion is suspected. The electronic plagiarism
detection can detect similarities in code structure even if comments, variable names, formatting etc. are
modified. If you collude to develop your code or answer your report questions, you will be caught.
For more information, please consult the following University web pages:
• Information regarding Academic Integrity and Misconduct:
– https://my.uq.edu.au/information-and-services/manage-my-program/student-integrity-andconduct/academic-integrity-and-student-conduct
–
http://ppl.app.uq.edu.au/content/3.60.04-student-integrity-and-misconduct
• Information on Student Services:
– https://www.uq.edu.au/student-services/
Late submission
Students should not leave assignment preparation until the last minute and must plan their workloads to meet
advertised or notified deadlines. It is your responsibility to manage your time effectively.
It may take the autograder up to an hour to grade your submission. It is your responsibility to ensure you
are uploading your code early enough and often enough that you are able to resolve any issues that may be
revealed by the autograder before the deadline. Submitting non-functional code just before the deadline, and
not allowing enough time to update your code in response to autograder feedback is not considered a valid
reason to submit late without penalty.
Assessment submissions received after the due time (or any approved extended deadline) will be subject to a
late penalty of 10% per 24 hours of the maximum possible mark for the assessment item.
In the event of exceptional circumstances, you may submit a request for an extension. You can find guidelines
on acceptable reasons for an extension here https://my.uq.edu.au/information-and-services/manage-myprogram/exams-and-assessment/applying-extension,
and submit the UQ Application for Extension of Assessment
 

印尼稻米收成与粮食安全数据集2026年 本数据集收录印度尼西亚2026年水稻收成与粮食安全遥测数据,包含10000条稻米农业收成产量与粮食安全监测记录,围绕印尼国家粮食安全体系中的核心作物水稻展开。稻米是印尼逾两亿人口的主粮,其收成波动直接影响国家粮食安全与进口政策,本数据集将种植区域、收成产量、气候与土壤相关遥测指标整合为结构化表格,可支撑粮食产量预测、收成影响因素分析、区域粮食安全评估与农业政策模拟等研究任务。典型应用场景包括:农业时间序列产量预测模型构建、气候因子与水稻收成的关联分析、省份与地区层面的粮食自给率测算、粮食安全风险预警指标设计,也可作为农业经济、粮食政策与数据科学交叉课程的教学素材。数据为2026年最新版,规模约1.2MB、单CSV结构规整,字段命名清晰,适合Python、Pandas、Scikit-learn等主流工具链直接使用,便于开展探索性分析、可视化与机器学习全流程练习。重要说明:本数据为遥测整理数据,分析结论以数据集文档口径为准,农业决策请结合官方统计综合研判。许可:CC0公有领域,可自由使用与二次分发。 立即下载

相关推荐

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

COMP3702 Artificial Intelligence

___ ____/ \ / \... ...same cell)Obstacles!!WidgetsVERTICAL_____\ /\_____/UP DOWN/ \ \ /

vx___codinghelp的博客 799

Delphi 13.2控件之msquic4d.rar

Delphi 13.2控件之msquic4d.rar

【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c

AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。

freewebsys的专栏 660

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

MCGS的Http协议驱动,支持http协议

硬件配置 参数设置 设备属性 设备命令 通讯状态 附录 #HTTP 1、 设备简介 驱动类型 该驱动为独立设备,直接添加构件即可,不需要挂载到父设备下 通讯协议 采用标准HTTP1.1协议 通讯方式 驱动构件为客户端。 2、 硬件连接 本软件在通讯之前,请保证通讯连接正确。通讯连接方式:采用标准的RJ45接口的以太网接线(对调网线或使用HUB交换)。 3、 设备通讯参数 本设备为独立设备,无父设备参数 4、 设备构件参数设置 “HTTP设备”参数设置如下: <1> 内部属性: 构建url信息。 <2> 最小采集周期:本软件对设备进行操作的时间周期,单位为ms,默认为100ms。 <3> 通讯等待时间:通讯数据接收等待时间,默认设置为200ms,当采集速度要求较高或数据量较大时,设置值可适当减小或增大。 <4> HttpHead:http head添加需要的字段,不需要添加http head时值为空,默认不添加。 5、 设备命令 本设备构件提供设备命令,用于进行相应的操作,设备命令的格式如下: 设备命令 命令介绍 GetHttpHead 格式1 GetHttpHead(headStr) 用途 获取http head参数 参数 headStr 参数可以为字符型变量、字符串常量 例1 !SetDevice(设备0,6,"GetHttpHead(headStr)") 获取http head数据保存到headStr中 SetHttpHead 格式1 SetHttpHead(headStr) 用途 设置http head参数 参数 headStr 参数可以为字符型变量、字符串常量

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

【DBO三维路径规划】基于多策略改进的蜣螂算法MSDBO多无人机协同集群避障路径规划(目标函数:最低成本:路径、高度、威胁、转角)研究(Matlab代码实现)

内容概要:本文研究了基于多策略改进的蜣螂优化算法(MSDBO)在多无人机协同集群三维路径规划中的应用,旨在解决复杂三维环境下的避障与最优路径搜索问题。通过构建包含路径长度、飞行高度、威胁规避和转弯角度的综合成本目标函数,利用MSDBO算法对多无人机系统的飞行轨迹进行全局优化,实现在保证安全性与稳定性的前提下达到最低能耗与最优性能的目标。文中详细阐述了算法的多策略改进机制、三维环境建模方法以及多无人机协同避障策略,并通过Matlab仿真平台验证了该方法相较于传统优化算法在收敛速度、路径质量和鲁棒性方面的优越性能。; 适合人群:具备一定优化算法理论基础和无人机控制系统知识的科研人员及研究生,特别适用于从事智能优化算法、多智能体协同控制、路径规划与自主导航等相关领域的研究人员和技术开发者。; 使用场景及目标:①应用于灾害救援、军事侦察、智能巡检等复杂三维场景中多无人机协同任务的路径规划;②为多目标约束下的路径优化、动态避障与能耗平衡问题提供高效的算法支持与仿真验证工具;③推动智能优化算法在无人系统自主决策与协同控制中的实际应用与工程落地。; 阅读建议:建议读者结合提供的Matlab代码深入理解算法的具体实现过程,重点关注目标函数设计、多策略改进机制(如种群初始化、自适应参数调整、局部搜索增强等)及仿真结果分析部分,同时可尝试将该算法迁移至其他智能优化算法框架中进行对比研究,以深化对路径规划问题本质的理解与实践能力的提升。

机器视觉检测实战教程 19页成品课程光源选型Halcon标定海康相机VisionPro

内容概要:机器视觉检测实战教程,19页6章成品课程PDF:视觉检测光源选型对照表+五个翻车案例、Halcon模板匹配create_shape_model七参数整定、视觉标定三类(9点/旋转/手眼)、海康工业相机C#取图黑图丢帧排坑、VisionPro QuickBuild部署License迁移C#宿主、远心镜头选型。含C#/Halcon代码与现场案例。适用人群:机器视觉工程师、自动化检测开发、企业内训。使用场景:视觉方案设计、选型、标定部署、团队培训。原创整理。

【医疗器械制造】基于酸碱腐蚀环境的一次性乳胶手套铝合金手模失效机理分析与量产风险控制

内容概要:本文围绕一次性医用乳胶手套生产中使用的铝合金手模在酸碱环境下的失效风险展开系统性分析,重点探讨其在外表面腐蚀、清洗循环、氯介质侵入及表面粗糙度控制等方面的工程挑战。研究表明,尽管市场上已有带涂层的铝合金手模供应,但其能否在强碱、酸洗、毛刷摩擦、冷热交变和氯共存的复杂工况下长期维持Ra 1.0—2.5 μm的表面质量并实现稳定脱模,仍需经过严格的多阶段验证。常规阳极氧化+PTFE涂层方案已被实测排除,而316L不锈钢筒体在湿氯环境中出现的三个月内腐蚀失效案例提示必须重视内腔隔离设计。文章强调,采购决策应基于“小批量试制—离线加速试验—影子生产验证—条件性放行”的四阶段准入机制,结合表面参数、工艺相容性、手套成品性能与全生命周期成本进行综合评估,避免依赖供应商宣传数据。; 适合人群:从事医疗器械制造、材料工程、设备采购与工艺质量管理的技术人员及决策管理者,尤其是涉及乳胶手套生产线优化与手模选型的相关从业人员。; 使用场景及目标:①评估铝合金手模替代陶瓷手模的技术可行性与风险边界;②建立手模选型的系统验证流程,防范因表面失效导致的脱模异常、手套缺陷与非计划停机;③指导采购合同中技术条款的制定,确保供应商交付具备可验证数据支撑; 阅读建议:此资源以工程实证为导向,建议读者结合自身产线工艺参数,重点关注外表面Ra控制、内腔双密封设计、影子生产验证方法及失效链追溯体系的构建,在试制阶段严格执行多维度联合判定标准,审慎推进规模化替代。

【CEEMDAN-VMD-GRU】完备集合经验模态分解-变分模态分解-门控循环单元预测研究(Python代码实现)

内容概要:本文提出了一种融合完备集合经验模态分解(CEEMDAN)、变分模态分解(VMD)与门控循环单元(GRU)的复合预测模型,旨在提升对复杂非平稳时间序列的预测精度。首先利用CEEMDAN对原始信号进行自适应分解,有效缓解模态混叠问题,获得一组本征模态函数(IMFs);随后引入VMD对关键模态分量作进一步优化分解,增强特征分离能力,降低噪声干扰;最后将处理后的平滑分量分别输入GRU神经网络进行独立训练与预测,并通过加权集成策略融合各分量输出,得到最终高精度预测结果。该方法结合了多尺度信号分解与深度学习的优势,显著提升了模型在处理强噪声、非线性、非平稳序列(如电力负荷、风速、光伏发电功率等)时的泛化能力和预测稳定性,文中提供了完整的Python代码实现,便于复现与应用。; 适合人群:具备一定Python编程基础和机器学习理论知识,从事科研或工程应用的硕士、博士研究生及科研人员,尤其适用于能源系统预测、智能电网调度、可再生能源管理、信号处理与时间序列分析等相关领域的研究人员和技术开发者。; 使用场景及目标:①解决传统单一预测模型在面对复杂非平稳时间序列时存在的过拟合、收敛慢、精度低等问题;②通过多阶段信号分解降低原始序列的复杂度与不确定性,提升GRU模型的训练效率与预测鲁棒性;③为电力系统负荷预测、新能源出力预报、设备运行状态预警及市场交易策略制定等关键任务提供高精度数据支撑。; 阅读建议:建议读者结合提供的Python代码逐模块理解算法实现流程,重点关注CEEMDAN与VMD的参数配置对信号分解效果的影响,尝试在不同数据集上进行实验对比,并通过可视化手段分析各模态分量的物理意义,进一步掌握模型调优与性能评估的方法。

【新能源电力系统】项目介绍 MATLAB实现基于GWO-VMD-SSA-LSTM灰狼优化算法(GWO)结合变分模态分解(VMD)、麻雀搜索算法(SSA)及长短期记忆网络(LSTM)进行辐照度-温度驱动

内容概要:本文提出了一种融合灰狼优化算法(GWO)、变分模态分解(VMD)、麻雀搜索算法(SSA)和长短期记忆网络(LSTM)的复合模型(GWO-VMD-SSA-LSTM),用于实现高精度的辐照度-温度驱动短期光伏功率预测。该模型首先通过GWO优化VMD的关键参数(模态数K和惩罚因子α),实现对非平稳光伏功率序列的高效多尺度分解,降低信号复杂性;随后利用SSA对LSTM的超参数(如隐藏层单元数、Dropout率、学习率等)进行智能寻优,提升网络训练效率与泛化能力;最后通过独立LSTM网络对各VMD模态进行预测并重构输出。模型结合了信号分解、智能优化与深度学习优势,显著提升了在多云、阴雨等复杂天气下的预测精度与稳定性,并通过MAE、RMSE、MAPE和R²等指标验证了有效性。文中还提供了完整的MATLAB实现流程,涵盖数据清洗、归一化、滑动窗口构建、参数优化与结果可视化等环节。; 适合人群:具备一定机器学习与时间序列预测基础,从事新能源发电预测、智能电网调度、电力系统自动化等相关领域的科研人员、工程师及研究生。; 使用场景及目标:①解决光伏功率受辐照度、温度等因素影响而导致的强随机性、非平稳性预测难题;②提升短期(15分钟至1小时)光伏出力预测精度,支撑电网经济调度、储能协同控制与电力现货市场申报;③为多源气象数据驱动的可再生能源预测提供可扩展的技术框架。; 阅读建议:建议结合提供的MATLAB代码逐步实践,重点关注GWO与SSA的优化机制、VMD分解效果及其与LSTM的集成方式,注意避免时间泄漏问题,推荐在实际数据上复现实验以深入理解模型性能。

无人机路径规划中多种优化算法的仿真研究(Matlab代码实现)

内容概要:本文围绕无人机三维路径规划问题,系统研究了多种智能优化算法在复杂环境下的仿真应用与性能对比,重点实现了改进灰狼优化算法(I-GWO)、标准灰狼优化算法(GWO)、金鹰优化算法(GJO)和正弦余弦算法(SCA)的Matlab代码实现。通过构建包含路径长度、飞行高度、威胁规避及转弯角度等多维度目标函数的综合评价体系,对各算法在单无人机路径优化与多无人机协同集群避障场景中的表现进行全面仿真分析,评估其路径规划能力、收敛速度与鲁棒性。研究旨在实现最低综合成本的飞行路径,并为多智能体协同任务提供可靠的算法支撑。; 适合人群:具备一定Matlab编程基础,从事无人机系统设计、智能优化算法研究、路径规划及相关自动化、人工智能领域的科研人员、工程技术人员及研究生。; 使用场景及目标:① 掌握主流智能优化算法在三维空间路径规划中的具体建模与实现方法;② 对比分析不同算法在路径优化质量、计算效率、避障能力和多目标权衡方面的性能差异;③ 为多无人机协同执行侦察、监测、救援等任务提供高效的路径规划解决方案与仿真验证平台。; 阅读建议:建议结合文中提供的Matlab代码进行动手实践,重点关注算法参数调优、目标函数设计以及环境障碍物建模对最终路径的影响,可进一步扩展至动态障碍环境或加入通信约束以适应更复杂的实际应用场景。

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书

内容概要:本文档《超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书》系统阐述了全桥LLC谐振变换器在开关电源中的设计方法,重点利用Mathcad工具进行精确的数学建模与参数计算。内容涵盖LLC谐振变换器的工作原理、关键参数设计(如谐振频率、励磁电感、变比等)、闭环控制策略、软开关实现条件、效率优化及工程实践中需注意的关键事项。文档通过详尽的数学推导和工程实例,构建了一套完整的从理论分析到实际应用的设计流程,特别强调了在不同负载与输入电压条件下确保ZVS/ZCS软开关的实现机制,并提供了实际设计中的取值依据与优化方向,为电力电子工程师提供了一个高效、可靠的设计参考方案。; 适合人群:具备电力电子技术基础,从事开关电源研发的工程师、高校电力电子及相关专业的研究生与科研人员,以及熟悉Mathcad、Simulink等仿真与计算工具的技术人员;; 使用场景及目标:① 掌握全桥LLC谐振变换器的参数设计与性能优化方法;② 开发高效率、高功率密度的软开关电源系统;③ 支持科研项目或工业产品中高性能电源模块的设计与验证;④ 结合仿真模型进行设计结果的验证与教学培训;; 阅读建议:建议结合配套的仿真模型与计算书同步学习,重点关注参数设计公式的推导过程与工程取值的合理性,动手复现计算步骤以加深理解,并通过仿真手段验证设计结果的准确性与鲁棒性。

九个版本一步跨:从JDK8到JDK17的特性增量、强封装迁移与ZGC实战解析

这篇文章要回答的,正是“从 JDK 8 直接跨到 JDK 17”这件事里最常被问到的四个问题: 九个版本到底攒下了什么? 语言、API、运行时三类变化里,哪些值得用、各自从哪个版本开始可用、哪些说法其实传错了。 升级为什么会“起不来”或“跑不通”? 强封装、被删除的模块、被移除的 JVM 参数,分别会以什么样子出现,怎么定位、怎么治本。 ZGC 的收益是真的吗?怎么测才算数? 停顿影响面怎么估算,压测时有哪些坑会把收益放大或掩盖。 落地要分几步走? 站在 2026 年,还该不该把 17 当终点。

上一篇: INFO3616/CSEC3616/CSEC5616
下一篇: INFS4203/7203 data mining
vx___codinghelp
博客等级 码龄2年 778粉丝 101原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值