158.337 Queries (SQL/LINQ), Triggers

SpringBoot+Vue+MySQL 高校学科竞赛平台 完整可运行版(源码+文档) 本项目基于SpringBoot+Vue+MySQL构建高校学科竞赛管理平台,覆盖学生、教师、领队教师、管理员四大角色,实现竞赛发布、报名、刷题、评分、公示等全流程闭环管理。系统架构清晰,技术主流,配套完整源码、数据库脚本、万字论文、开题报告、答辩PPT及部署文档,支持一键运行,适用于毕业设计、课程设计及院系二次开发,真正实现“开箱即用”。 阅读详情

158.337 Group Project Instructions: Part B

(Course mark - 17.5%)

You will continue to work in groups* for this assignment. You do not need to register again but in case you change your group membership please let us know via emailing Indu (i.b.sofat@massey.ac.nz).  Make   sure  you  formally  inform. your  Assignment  Part  A partner(s) as well. You will lose significant marks if you do not work in a group without a very strong reason and permission. You can use the group forum for this should you need to but do this early on; in fact, sort this first. Any other submission irregularities will also have a penalty.

Use the following instructions to guide you in the Four Sections (Section A – Section D) of the project. You should turn the work in for grading by the due date (Tuesday, 15th Oct 4.00 pm).

Notes:

•    *Working in a group does not mean you completely split the work or probably work only on one section. You should all work on each section and then compare your work i.e. have discussions around any differences (e.g., different results, style. of coding, getting stuck, etc.). Subsequently you collate put your best work in the report. We suggest you start working on assignment in parallel (this will also prepare you for the coding test which is required to be done individually).

•   Make sure you have altered the password of your (Group) Oracle a/c and keep it safe within your group. You do not want other people accessing your account and code. We have seen this in past that occasionally students have been able to access other group accounts,  if  the  default  passwords  have  not  been   changed.  Remember  it  is  your responsibility to protect your work.

•   Do not post any  assignment queries on the  Stream’s  discussion  forum. Everyone is expected to work within their group and such posts either give away the answer or may pose some confusion to other groups who may be writing scripts differently.

PART B

Queries (SQL/LINQ), Triggers, Procedures, Function, Cursor (PL SQL) & MongoDB (NoSQL)

Download  following  two  files  provided  in  a  compressed  folder  (PartB.zip)  under  the Assignment heading from the Stream site:

University database file (UniversityDatabase.sql) - for Sections A, B and C.

The file provides code to create the required database in your account. Seven tables created are – LOCATION, FACULTY, STUDENT, TERM, COURSE, COURSE_SECTION, and ENROLLMENT.

Collection file (NoSQL.txt) - for Section D.

Use script. files (use some text editor e.g., Notepad++) for writing your solution code. Name your files appropriately (e.g., SectionA.sql). Include query number (e.g., a) along with the given query question (e.g., Write a query that will list...) as part of the comment before writing the solution code (SQL / PL/SQL / LINQ) in these files. Annotate your code with suitable comments wherever necessary.

Use a Word file for your project report (this can be later converted into a pdf should you prefer to submit a pdf report). As mainly the report will be used for grading so you will need to transfer your final working code from the script. files to this report as well. Here you also need to include the outputs of your code (e.g., query results, etc.). The outputs presented in the report should be well formatted (properly aligned, appropriate column names, etc.) for readability purposes. The script. files will be used wherever required (i.e., we may not the run code for every question but may for the some to confirm that the code works correctly in differently simulated situations).

For PL/SQL (triggers, procedures, etc.) besides the created code, the output produced from running the code (e.g., procedure successfully created, etc.) you also need to provide the testing examples using some quality test data to prove that procedure/trigger works the way it is intended to work. Once again make it easy for grading by being easy to read but also make it easy should the grader choose to run the code.

All (SQL/LINQ) queries must only be based on the information provided in the assignment question itself (e.g., Write a query that will list...). Do not use a different criterion to arrive at the expected equivalent query result set. Also, do not manipulate the query results by using ROWID, ROWNUM, With Ties, etc. to sort and get the first ranked /last record, etc. Some SQL may require use of subqueries, etc.

Ensure that the query results display the information that is asked including the columns that are necessary to easily evaluate your query results. That does not mean use “*” to display everything – use your judgement and fulfil the query requirements. Your code should work correctly even when the database is modified (e.g., added more records, deleted  some, modified  some values,  etc.). At times, you may  consider making  some  changes to the database itself to see your code works fine for the changed database (works as expected).

Notes:

•   For all exercises asking you to display names, list first name and last name as a single column instead of separate columns.

•   Remember to include all three - the asked question (as comment), the code (SQL /PL SQL /LINQ/ MapReduce) and the output (including any test cases, etc.) in your report. Some questions may have other additional requirements, so meet those as well.

Section A (SQL Queries)            (20 marks)

Note: For each of the questions (a)-(h) in  Section A, write code using a  SINGLE statement ONLY (i.e., you cannot write two separate select statements to arrive at an answer; however, select clause can be used more than once in a statement. There should only be one semi-colon in your code). Use the given criteria only. We will either give full or zero mark for most of the questions in this section so make sure your answer is fully correct.

a.   Write a query that will list the faculty members (along with the building code and room number) who are (located) in the (BUS)iness building.            (1.5 marks)

b.   Write a query that will list students who are enrolled in the courses offered in the Fall term of 2024 or 2025 or Spring term of 2025. Do not display the duplicate student names in the output.          (1.5 marks)

c.   Write a query that will list the total building capacity of various buildings. The rooms with a capacity of less than five must be excluded when generating building’s total capacity. The final query result should list the buildings with a total building capacity of 150 or over. Present this in the increasing order of the total capacity.       (2 mark)

d.   Write a query that will list faculty supervisors and their respective students. Each supervisor’s students should appear in a single row (i.e., list of values instead of separate rows) i.e., if a faculty supervisor supervises more than one student then all the supervised students’ names should appear in a single row (next to each other separated by a delimiter). Present your final output in the order of faculty supervisor's id and include only those results where the number of students against a supervisor is more than 1.

Hint: May have to google for Oracle’s special aggregate function.               (3 mark)

e.   Write a query that will list students enrolled with a total of 12 or more course credit points. List your results in decreasing order of total credit points. Do not assume or hard code the value of the course credits (e.g., 3, 6, etc.).                              (3 mark)

f.   Write a query that lists the courses (with their course names) and the course sections that are offered either on all the three days (M)onday, (W)ednesday and (F)riday or at least four times a week. Also, display the course section days (e.g. MWF), the course section time (e.g. 2 pm), number of the days that the courses are offered (e.g., 5 days). List your results in the increasing order of number of days.

Hint:  The  attribute  c_sec_day  lists  weekdays, where the  first  letter represents  a weekday (e.g. M-Monday,…...,F-Friday; for Thursday R is used). The course section weekdays are listed in the order M(onday) to (F)riday i.e., Monday being the first. (3 marks)

g.   Write a query listing the details of the faculty member(s) who supervise(s) the highest number of students. The result should also display the number of students. The query should also work in situations when more than one supervisor has highest students (e.g., 2 supervisors each having 5 students and 5 being highest number).     (3 marks)

h.   Write a query that will list student(s) enrolled with the highest total course credit points. The result should also display the number of courses that a student is enrolled for, the average credit points, the highest credit points along with the total credit points. (3 would be highest if all enrolled courses are worth 3 otherwise 6 if enrolled with a course worth 6).                                                                                    (3 marks)

Section B (PL SQL)                     (26 marks)

Comprehensive testing examples needed for all PL/SQL (triggers, procedures, cursor, and function). You need to capture and show that you tested your code using good test cases. Include some exception handling as deemed necessary.

a.   Think of a useful business rule or situation (based on the provided database) where it would be appropriate for a trigger to fire. However, do not write trigger to do something that  could  be  done  using  some  database  design  constraints  (e.g.,  simple  referential integrity checking, assign default values to attributes, or simply saying record is being inserted, or an attribute has a null value, etc.). Provide a sensible and useful trigger and do not use the already provided or similar triggers (including tutorial triggers) for this question. Failing to meet these will result in a zero mark. There is also a discretionary mark for the degree of difficulty/relevance, etc. (1 out of the total 7). But do not confirm the trigger quality with staff before submission.

Start first by clearly explaining the context and purpose (what it will do using business language)  of  your  trigger.  Then  provide  the  PL/SQL  code  and  the  results  (using appropriate testing scenarios).

The trigger should be based on the tables already provided. Do not unnecessarily create too many and/or similar tables. Adding one or two tables may be fine – but justification is needed. Altering a table (adding a field) is fine.

Write one trigger (tell the trigger type). Display the successful creation and the results of running the trigger. Ensure that you also display the relevant tables before and after (results of the trigger) the trigger is fired. Remember to provide the purpose of your trigger (as stated in question b below), as this helps us to evaluate your work against the stated trigger requirements.                         (7 marks)

b.   Write a trigger that does not allow more than two 'Full' ranked professors as part of the faculty (For example, trigger should fire if a new (third) Full professor is added or the rank  of  one  of  the   existing  Associate  professors  is  promoted  to  Full).  Provide comprehensive test data and test results to confirm that the trigger works.         (4 marks)

c.   Write a trigger to check that when salary is updated for an existing faculty the raise is not over 5.5%.              (4 marks)

d.   Write a procedure to insert a new faculty record. The procedure should also automatically calculate the faculty salary value. This calculated salary should be  10% less than the average salary of the existing faculty members. Use the rest of the attribute values as input parameters. Execute your procedure to insert at least one faculty record.            (4 marks)

e.   Use a cursor to list course sections for all theMIS courses (along with their courses names and credits). Present the report in the order of course section id and course number. In the end, also display some meaningful summary statistics as part of the outcome.  (4 marks)

f.   Write a function, which can be used to format faculty member’s salary using appropriate format (e.g., $80,000.00). Do not hard code the exact salary datatype (i.e., your function should work even for some minor changes that may be made to the salary data size).

Call this function using a SQL statement for displaying a faculty member’s salary.  (3 marks)

Section C (LINQ Queries)                            (6 marks)

For (a) – (e) below, write queries using LINQ.

a.   List faculty members who earn 80,000 or over.                                        (1 mark)

b.   List courses that have MIS in their course number.                                  (1 mark)

c.   List faculty members and their location details.                                        (1 mark)

d.   Display the total number of rooms in each building.                                (1.5 marks)

e.   Display total number of students supervised by each faculty in the order of faculty last name.                        (1.5 marks)

Section D (NoSQL)                             (8 marks)

Use the code provided in NoSQL.txt to create a collection of 15 rows called dragons.

Now write MapReduce code to generate a report based on:

•   the gender-wise average weight.

Rewrite the above MapReduce code using Aggregation pipeline operators.

Include both the code and the report generated in your assignment report. Place the code in a script. file as well.

Assignment Submission

Organise your final report (print friendly – but soft copy) to include all assignment sections’ work. Make sure the report contents are also in the order of the laid assignment requirements (e.g., section-wise work).

There are three parts to this assignment submission:

•   a report (word/pdf)

•   scripts (code files – one for each section, clearly labelled) and

•   database objects (in your Group’s Oracle account)

You must put your final report and code file(s) into a “single” compressed folder and submit via the Stream Assignment link.

Make sure there are not too many separate/unnecessary duplicated code files (e.g., all section A queries in a single file and not separate files). No duplicate group submissions (ONLY one per group).

Checklist for final report:

Readable format of SQL, PL/SQL, LINQ commands, and Map Reduce code. Remember to include the related outputs along with the code (not separately in an appendix). For some questions, there are additional specific requirements (e.g., purpose of trigger, etc.).

Checklist for submission under your Group Oracle a/c: All objects - database tables, triggers, procedures, etc.

Checklist for Stream submission:

Check your project work and make sure that all the scripts run without any errors. Also, check that appropriate names have been given to all file(s). Upload your report and code on Stream as a single compressed file on the Assignment link.

Notes:

Enter your names, student ids on the project marking sheet (Appendix B). The project report should include this marking sheet (at the front i.e., 1st  page). Make sure to provide the correct Oracle username in your report. Remember to include the script file(s). Make sure your work is well presented (i.e., easy to grade).

Plagiarism and other project guidelines:

Use of any AI tools is NOT Permitted for the course assessments. You can find more information about the Student Academic IntegrityPolicy here. This will lead to a ZERO and may lead to an academic investigation by the Academic lead.

We suggest you keep a record of the intermediate work (work in progress) leading up to    your assignment submission as you may be asked to establish that this is your work and is done over a period of time.

A ZERO mark will be given to ALL the collaborating parties (no discussion on who did the original work and who copied). Any partial copying will also be awarded a straight

ZERO.

Make   sure   all   your   work   is   complete   before   you   submit.   Graders   will   not   be searching/chasing you for any not easily traceable/missing assignment component(s).

Not adhering to any of the assignment requirements, may also be given a straight ZERO.

We expect each group member to genuinely and independently work on all the sections. Any reported non-contributors within  a group may be given a ZERO.

Note: Turnaround time for assignment may be slightly over the usual three weeks.

OpenCloudOS9操作系统搭建Confluence8.2.1+Jira企业级WIKI Atlassian Confluence是一个专业的企业知识管理与协同软件,可用于构建企业wiki 阅读详情

相关推荐

深入解析TOM模块的PWM输出与ADC触发机制:从配置到DMA数据传输

本文深入解析了TOM模块在嵌入式系统中的核心应用,详细阐述了如何配置其PWM输出功能,并实现与ADC模块的硬件触发同步。重点介绍了通过DMA机制高效传输ADC采样数据的完整流程,涵盖时钟配置、工作模式选择、引脚映射及联调实战,为电机控制、数字电源等实时系统提供了一套硬件自动化的高效解决方案。

weixin_29227585的博客 370

177.Agent-LangGraph-MCP的构成说明

MCP架构通过MCP主机、客户端与服务器的协同,实现工具、资源与提示词的统一管理。MCP服务器提供Tools、Resources、Prompts能力,MCP客户端则负责发现、调用与读取,使Agent可按需获取上下文。其核心在于将工具从Agent中抽离,封装为可复用的服务,提升灵活性与可维护性,推动AI应用高效协作。

计算机王的博客 315

FPGA时序分析中的工艺角:从PVT原理到建立保持时间验证

在数字电路设计中,静态时序分析(STA)是确保芯片功能正确和性能达标的核心验证手段。其基本原理是通过计算信号在逻辑路径上的传播延迟,检查建立时间和保持时间是否满足寄存器采样要求。这项技术的核心价值在于,它能在芯片制造前就预测并消除时序违规,极大提高设计成功率。然而,实际芯片性能会受到工艺波动、电压变化和温度漂移(合称PVT)的显著影响。为了覆盖这些不确定性,时序分析必须采用基于工艺角的边界模型——用最慢的工艺角模型验证建立时间,用最快的工艺角模型验证保持时间。这种分析方法广泛应用于FPGA和ASIC设计流程

weixin_30181209的博客 199

Docker Compose:搭建本地多服务开发环境

从一个 Java API、PostgreSQL 和 Redis 开始,配置服务名、端口、环境变量、健康检查、数据卷和依赖关系。理解 Compose 文件如何被解析、项目如何隔离,以及哪些数据不能依赖“重建容器”保留,能够把个人开发环境整理成团队可复用的启动入口。

m0_62221377的博客 478

正点原子lwIP实战指南——从FreeRTOS移植到网络应用开发

本文详细介绍了如何将轻量级TCP/IP协议栈lwIP移植到FreeRTOS实时操作系统上,并基于正点原子STM32开发板进行网络应用开发。内容涵盖从使用STM32CubeMX快速搭建工程、核心概念解析(RAW/NETCONN/Socket API),到关键的系统适配、驱动实现,并通过TCP Echo服务器和云台控制两个实战案例,手把手指导读者完成从移植到应用开发的全过程,帮助嵌入式开发者快速掌握lwIP在FreeRTOS环境下的稳定部署与开发技巧。

s4t5u6v的博客 1002

Rclone替代RaiDrive?零广告免费挂载Alist WebDAV到Windows资源管理器(含自启脚本)

本文详细介绍了如何使用开源工具Rclone替代RaiDrive,实现零广告、全免费的Alist WebDAV挂载方案。通过深入解析配置参数、提供完整的自启动解决方案和解决常见问题,帮助用户在Windows资源管理器中高效管理云存储,提升使用体验。

weixin_33709364的博客 642

AI全栈实战 | 3.9-01 爬虫入门:requests 加 BeautifulSoup 三分钟跑通,但 90% 的人栽在这 4 个“礼貌“问题上

⚠️:本文内容仅用于。请遵守目标站点的服务条款与相关法律法规,不得对目标服务造成负担,不得采集、传播个人隐私数据。技术是中性的,边界在你手里。爬虫的入门技术(requests 发请求 + BeautifulSoup 解析)三分钟就能学会。真正区分"会用爬虫"和"会做爬虫的人"的,是这篇我们跑通"请求→解析→存储"的最小闭环,然后重点把"合规与礼貌"这根弦给你绷上。

源码获取 | 运行部署 | 定制二开修改,如果回复不及时请耐心等待,请见谅。 442

QT触摸屏开发:如何通过重写事件处理实现精准按键长按检测

本文针对QT触摸屏开发中按键长按检测不精准的常见问题,深入剖析了传统信号机制失效的原因,并提供了通过重写事件处理函数(event)的解决方案。文章详细介绍了创建自定义TouchButton类、直接处理QTouchEvent以实现可靠长按检测的完整步骤与代码示例,并分享了进阶优化与避坑指南,帮助开发者实现跨平台一致的精准交互。

weixin_29207149的博客 105

spring boot 4集成SQLLite,及其SQLLite的建库

spring boot 4集成SQLLite,及其SQLLite的建库

weixin_41463944的博客 237

别再只放按钮了!巧用微信小程序‘长按识别’功能,打造无缝加群体验

本文深入探讨了微信小程序'长按识别'功能在社群运营中的创新应用,通过简化加群流程至一步操作,显著提升用户转化率。文章详细解析了技术实现细节、UI/UX设计策略,并对比了与企业微信API的适用场景,为开发者提供打造无缝加群体验的完整解决方案。

weixin_42627853的博客 435

Windows下用Docker快速搭建SearXNG私有搜索引擎(附Dify集成配置)

本文详细介绍了在Windows环境下使用Docker快速搭建SearXNG私有搜索引擎的完整流程,包括环境准备、容器化部署、安全配置优化以及与Dify平台的深度集成方法。通过分步指导和实用配置示例,帮助开发者构建兼具隐私保护和AI增强能力的本地化搜索解决方案,特别适合需要定制化搜索服务的应用场景。

weixin_30300225的博客 336

【基于 WebSocket 的多用户网页五子棋】—— 数据管理模块

但行好事,莫问前程

qq_42996461的博客 260

vue3 - 详细实现用户收货地址识别解析“姓名/手机号/省市区/街道/乡镇村庄“关键字,用户复制粘贴一段含有姓名电话/详细地址的文字文本信息,vue3自动识别拆分并填入到对应表单字段中,详细示例代码

vue3,nuxt3,快递地址读取,收货地址解析、快递地址解析、物流地址解析自动识别,收货地址解析,从发货地址中拆出姓名电话地址,根据粘贴的字符串提取姓名地址,vue3地址信息自动识别,ts,vue3智能识别地址,提取姓名电话地址信息,自动识别出省市区街道姓名手机号等,根据文本自动解析出收货信息,怎么识别文本中的手机号,粘贴板地址识别,地址智能识别,如何识别收货地址中的关键字,粘贴一段文字后,自动识别到姓名/手机号/收货地址,vue3仿淘宝地址智能识别解析实现,省市区街道智能解析,vue3收货地址,识别地址

✅ 精选推荐文章 5505

OpenClaw 深度调查:把 AI 助手做成你自己的控制平面

对 openclaw/openclaw 的完整技术尽调:Gateway 架构、Agent 运行时、工具与沙箱、30 个消息通道、181 个插件、安全信任边界、工程代价与采用建议。17 章 / 10 张图,全部数字标注口径,数据截至 2026-10-31。

厚积薄发 349

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

霍尼韦尔SoftMaster使用说明

霍尼韦尔SoftMaster使用说明

IDEA 简介:从零认识 IntelliJ IDEA

IDEA 全称,是由 JetBrains 公司开发的一款主流 Java 集成开发环境(IDE)。它集代码编辑、编译、调试、测试、版本控制、构建管理等功能于一体,被大量 Java 开发者视为日常开发的首选工具。所谓 IDE(Integrated Development Environment,集成开发环境),就是把写代码所需的各类工具整合到同一个界面中。相比只用文本编辑器加命令行编译,IDE 能显著减少重复操作,让开发者把精力集中在业务逻辑上。

ztI10的博客 185

win10 跳过U8环境检测的IE WebControls.rar

win10 安装u8的时候 提示IE WebControls 不通过,这个工具可以欺骗u8的检查。 跳过U8环境检测的IE WebControls。提示导入失败后,重新检测通过。

TransactionInactiveError:await 之后事务已经不活跃了

TransactionInactiveError 出现于 IndexedDB 事务已结束(非 active 状态)时调用 put、get 等操作。常见于 await 后或 setTimeout 中执行请求,因任务已完成,事务已提交或进入 finished 状态。请求必须在创建事务的同一任务中挂起,否则无效。解决方法:在 onsuccess 回调内同步发起后续操作,或提前将所有请求挂入事务。避免在异步上下文中使用事务操作,确保请求在事务活跃期内完成。

qq_40822000的博客 159

文档:亲测可用解决vnc灰屏,黑屏,鼠标大黑叉情况

主要解决vnc-viewer灰屏,黑屏,鼠标大黑叉等现象,详细见文档。

Docker部署linkding:HTTPS与数据备份

部署私人书签库,除了让页面能够打开,还需要考虑几个实际问题:重建容器后数据是否保留、登录和保存是否正常、升级前怎样备份,以及出现 502 或 CSRF 错误时从哪里检查。本文使用 Docker Compose 部署 linkding,采用默认 SQLite 数据库,通过 Caddy 提供 HTTPS,并完成账户创建、数据持久化验证和备份。如果重建后账户或书签消失,应先检查是否换了项目目录、改了挂载路径,或者启动了另一套实例,不要急着重新初始化。遇到权限问题,应根据日志确认具体目录和运行用户,再调整权限。

tedcloud123的博客 194

云计算课程小组PPT汇报任务书

36人分为6组,每组6人;形式:生活案例调研 + 理论解读;汇报时长7‑9min;PPT建议10‑14页。

Michelle8023的博客 227

企业官网源码与数据资产交接:四项权利、五组自动检查

企业官网源码交接不仅要看压缩包,还要核域名、云资源、构建脚本、数据库恢复、权限与密钥。

sweetofmine1的博客 187

软件项目交付时,源代码之外还应该交付哪些技术资料?

软件项目交付时,除可运行程序外,还应核对源代码、数据库结构、接口文档、部署运维、测试验收和账号资产。本文从实际交付环节拆解完整资料清单,并说明合同如何约定交付范围、知识产权与维护边界。

chengduyoushu的博客 308

Java 项目实战:交友项目后台系统——网关统一鉴权与 B 端管理后台

本次改造通过引入SpringCloud Gateway实现网关统一鉴权与路由,新建mf-admin管理端复用C端域服务(Dubbo调用),实现管理员登录与用户管理四件查询。核心套路:网关白名单+双体系JWT(同工具不同payload)、管理端零直连业务库、分页形态区分(MySQL自动count/Mongo手动count)、浏览器端独立聚合。踩坑12条,附自检清单与后续改造方向,可复用于多角色后台系统。

Wang的专栏 69

大表 ALTER TABLE 怎么做?NineData OnlineDDL 配置与执行实践

介绍NineData OnlineDDL大表变更实践,涵盖执行策略、切表控制、拷贝批次与可视化进度追踪。

dbasenewbie的博客 295

Axum 初步入门学习笔记

)自定义错误实现后,可以直接作为Result的ErrAxum 是一个构建在 Tokio、Tower、Hyper 之上的 Rust Web 框架,核心能力是:Router 路由、Extractor 提取器、Tower 中间件、IntoResponse 响应机制、State 共享状态。那张分层架构图是“地图”不是“说明书”:它帮你建立全局观,但 Service、Repository、数据库、Redis、MQ 都是你自己在 Handler 内部调用的业务/基础设施层,不是 Axum 自带的。

weixin_43219667的博客 206

MySQL报Too many open files?句柄耗尽的排查与参数配置

文章讲清 max_connections 与 open_files_limit 两个额度、句柄被谁占走、分区表为什么最容易踩,给出从 error log 到 /proc/pid/limits 的定位顺序与句柄预算算法。

「一个在数据库赛道上边学边分享的学妹」——聚焦国产数据库/信创方向、分享学习笔记、踩坑经验和行业观察。 338

SQL Server 数据库双备份:简化配置,兼顾本地留存与异机归档

本文针对中小企业SQLServer数据库备份难题,提出简化配置与本地+异机双副本方案。传统原生备份依赖手动脚本,存在配置复杂、传输易中断、日志分散、静默失败等问题。推荐使用图形化工具实现备份、本地留存与异机同步一体化管理,支持断点续传、加密传输、自动清理与版本控制,降低运维负担。双副本策略提升数据安全性,本地快速恢复,异地防硬件故障。建议定期验证恢复流程,确保备份可用性。

2501_93776716的博客 313

Redis 入门详解:核心特性、重要文件与全局命令实战

本文系统介绍了Redis的核心特性、重要文件及全局命令。Redis凭借内存存储、C语言实现和单线程设计,具备极高的读写性能;支持持久化(RDB/AOF)、主从复制与集群架构,适用于缓存、排行榜、计数器等场景,但不适合存储海量冷数据。文中还解析了常见面试题,如为何快速、单线程原理、持久化机制、KEYS *禁用原因及过期键处理策略,强调其在高并发场景下的优势与局限。

2303_77004089的博客 208
上一篇: 159.235 Wireframe Data Viewer
下一篇: COSC2391 Further Programming
vx___codinghelp
博客等级 码龄2年 778粉丝 101原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值