要使用GraphEdt5.0，需设置环境变量WINCEREL为1，并因GraphEdt使用MFC，故须设SYSGEN_MFC为1。若不想重新编译所有内容，可运行sysgen-pdcommfc命令。最后运行sysgen-pdirectxgraphedt即可在_flatreleasedir目录下找到GraphEdt.exe。
To use graphedt on 5.0...you need to do the following:
1. set WINCEREL=1
2. graphedt uses MFC, so set SYSGEN_MFC=1. If you don't want to rebuild
the world run "sysgen -p dcom mfc"
3. sysgen -p directx graphedt
You should now be all set with graphedt.exe in your _flatreleasedir.
Graph Edit tool under Windows CE 5.0
最新推荐文章于 2025-08-07 22:59:06 发布
扫一扫
4695
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
