NWPA Update Package Installation Instructions for

最新推荐文章于 2025-02-28 23:40:58 发布

u014461454

最新推荐文章于 2025-02-28 23:40:58 发布

阅读量541

点赞数

CC 4.0 BY-SA版权

本文链接：https://blog.youkuaiyun.com/hawht/article/details/22682475

本文提供了针对新安装及已安装 NetWare 4.11 服务器的更新指南，详细介绍如何下载并安装 NWPA 更新包以及相关驱动程序。确保服务器能够正常运行 NWPA，并介绍了安装过程中涉及的 DOS 命令。

http://developer.novell.com/devres/storage/drivers/NWPA_Up_411.html NWPA Update Package Installation Instructions for NetWare 4.11


For new NetWare 4.11 servers: From the website at `http://developer.novell.com/devres/storage/drivers/index.html` click on the `Update Your NetWare 3.12 or 4.11 Server to Work With NWPA` link and download the NWPA Update Package (`NWPA_UP.EXE`) at the `NWPA Update Package` link and the installation instructions (this file) from the `NWPA Update Package Installation Instructions for NetWare 4.11` link on the same page. Install DOS and the CD-ROM driver on the target server machine. Create the `C:\UPDATE` directory. Copy `NWPA_UP.EXE` to `C:\UPDATE` Enter the following commands at the DOS prompt: `c: cd \update nwpa_up -o` If you have any new `.HAM` or `.LAN` drivers, or those whose versions are later than those already on the NetWare 4.11 CD-ROM, copy those files, plus their `.DDI` and `.LDI` files, to `C:\UPDATE` as well. Insert the NetWare 4.11 CD-ROM into the CD-ROM drive and the NetWare 4.11 License diskette into the floppy drive. Change directory to the `D:\` directory on the CD-ROM, if its drive letter is `D:` Install NetWare 4.11 by entering `install` at the DOS command line. Proceed through a Custom installation of NetWare 4.11 as usual. When the installation program prompts you to add any special startup set commands to `STARTUP.NCF`, add the following lines after those already present: `load c:\update\nwpa load c:\update\nbi load c:\update\idehd load c:\update\idecd load c:\update\scsihd load c:\update\scsicd load c:\update\ideata port=1f0 int=e load c:\update\ideata port=170 int=f` When prompted by the installation program to select a storage or LAN driver to install, select it from the `C:\UPDATE` directory. After all desired storage and LAN drivers have been selected, select Use the CD-ROM to get drivers, then continue the installation by creating NetWare partitions and volumes as needed. When prompted by the installation program to edit `AUTOEXEC.NCF`, add the following lines after those already present: `load c:\update\cdrom cd mount xxxxx` If you know the ISO9660 name of your CD-ROM volume, replace the xxxxx with that name. Press <F10> to save the `AUTOEXEC.NCF` file and begin the Main Copy to proceed and complete the NetWare 4.11 installation. Remove the NetWare 4.11 CD-ROM and the NetWare 4.11 License diskette. Enter `down` and then `restart server` at the server console to reboot the server. For currently installed NetWare 4.11 servers: From the website at `http://developer.novell.com/devres/storage/drivers/index.html` click on the `Update Your NetWare 3.12 or 4.11 Server to Work With NWPA` link and download the NWPA Update Package (`NWPA_UP.EXE`) at the `NWPA Update Package` link and the installation instructions (this file) from the `NWPA Update Package Installation Instructions for NetWare 4.11` link on the same page. Create the `C:\UPDATE` directory. Copy `NWPA_UP.EXE` to `C:\UPDATE` Enter the following commands at the DOS prompt: `c: cd \update nwpa_up -o` If you have any new `.HAM` or `.LAN` drivers, or those whose versions are later than those already on your server, copy those files plus their `.DDI` and `.LDI` files, to `C:\UPDATE` as well. Change directory to the `C:\NWSERVER` directory. Edit `STARTUP.NCF` and add the following lines after any set parameters but just before any lines that load drivers: `load c:\update\nwpa load c:\update\nbi load c:\update\idehd load c:\update\idecd load c:\update\scsihd load c:\update\scsicd load c:\update\ideata port=1f0 int=e load c:\update\ideata port=170 int=f` Add or replace subsequent lines of the `STARTUP.NCF` file to load new or updated `.HAM` and `.LAN` drivers from the `C:\UPDATE` directory, delete all other lines that load drivers, save the file, and exit to DOS. Enter `server` to start the server. At the server console enter `load install` Edit `AUTOEXEC.NCF`, and replace the line to load `CDROM.NLM` with the following lines: `load c:\update\cdrom cd mount xxxxx` If you know the ISO9660 name of your CD-ROM volume, replace the xxxxx with that name. Enter `down` and then `restart server` at the server console to reboot the server.