docker ntpdate同步时间执行失败

当容器以非特权模式运行时,很多操作都没有权限执行,

[root@d3803eb23a14 /]# ntpdate hshh.org asia.pool.ntp.org
22 Nov 07:12:43 ntpdate[78]: Can't adjust the time of day: Operation not permitted

解决办法之一就是开启特权模式--privileged,但是这样一来容器里权限就过大,安全隐患也大,因此我们可以通过--cap-add来增加一些比较细致的权限,比如对于时间修改,就可以增加SYS_TIME权限,

[root@CentOS-7-2 /home]# docker run -it --cap-add=SYS_TIME --name test 165931a63fea /bin/bash
[root@6659a1445222 /]# ntpdate hshh.org asia.pool.ntp.org
22 Nov 07:15:03 ntpdate[64]: adjust time server 211.19.59.28 offset 0.032864 sec

之前遇到过ssh连接容器后闪退的问题(Docker容器内运行sshd进程,远程登录闪退(Exit status 254)),也是因为权限问题,问题根因是因为pam模块里设置ulimit时权限不够,导致鉴权失败。这个问题除了特权模式外,同样可以通过添加--cap-add添加CAP_SYS_RESOURCE权限得到解决。

更多权限可以通过man capabilities,查看用户手册,

......
       CAP_SYS_PTRACE
              Trace  arbitrary  processes  using  ptrace(2);  apply get_robust_list(2) to
              arbitrary processes; inspect processes using kcmp(2).

       CAP_SYS_RAWIO
              * Perform I/O port operations (iopl(2) and ioperm(2));
              * access /proc/kcore;
              * employ the FIBMAP ioctl(2) operation;
              * open devices  for  accessing  x86  model-specific  registers  (MSRs,  see
                msr(4))
              * update /proc/sys/vm/mmap_min_addr;
              * create  memory  mappings  at  addresses  below  the  value  specified  by
                /proc/sys/vm/mmap_min_addr;
              * map files in /proc/bus/pci;
              * open /dev/mem and /dev/kmem;
              * perform various SCSI device commands;
              * perform certain operations on hpsa(4) and cciss(4) devices;
              * perform a range of device-specific operations on other devices.

       CAP_SYS_RESOURCE
              * Use reserved space on ext2 file systems;
              * make ioctl(2) calls controlling ext3 journaling;
              * override disk quota limits;
              * increase resource limits (see setrlimit(2));
              * override RLIMIT_NPROC resource limit;
              * override maximum number of consoles on console allocation;
              * override maximum number of keymaps;
              * allow more than 64hz interrupts from the real-time clock;
              * raise msg_qbytes limit for a System V message queue above  the  limit  in
                /proc/sys/kernel/msgmnb (see msgop(2) and msgctl(2));
              * override  the  /proc/sys/fs/pipe-size-max limit when setting the capacity
                of a pipe using the F_SETPIPE_SZ fcntl(2) command.
              * use F_SETPIPE_SZ to increase the capacity of a pipe above the limit spec‐
                ified by /proc/sys/fs/pipe-max-size;
              * override /proc/sys/fs/mqueue/queues_max limit when creating POSIX message
                queues (see mq_overview(7));
              * employ prctl(2) PR_SET_MM operation;
              * set /proc/PID/oom_score_adj to a value lower than the value last set by a
                process with CAP_SYS_RESOURCE.

       CAP_SYS_TIME
              Set  system  clock  (settimeofday(2), stime(2), adjtimex(2)); set real-time
              (hardware) clock.

### 解决下载 Docker 仓库元数据失败问题 当遇到下载 `docker` 仓库元数据失败的情况时,可以采取多种措施来解决问题。 #### 检查网络连接和主机解析 如果出现错误信息类似于 “Could not resolve host: download.docker.com; Unknown error”,这表明可能存在 DNS 或者网络连接方面的问题。建议先确认本地系统的网络设置以及能否正常访问互联网资源[^3]。 #### 验证并修正软件源配置文件 对于 CentOS 用户来说,有时默认提供的 `/etc/yum.repos.d/docker-ce.repo` 文件内的某些参数设定不当也会引发此类故障。特别是要注意对比不同存储库之间的启用状态(`enabled`)字段值;通常情况下应该保持一致——要么全部设为 `0`(禁用),要么都置成 `1`(开启)[^4]。 #### 更新系统时间同步服务与时区设置 确保服务器的时间准确无误非常重要,因为很多在线认证机制依赖于精确的时间戳来进行验证操作。可以通过安装 NTP (Network Time Protocol) 来实现自动化的时钟校准功能: ```bash yum install ntpdate -y && systemctl start ntpdate.service && systemctl enable ntpdate.service ``` #### 清理缓存重试命令执行 有时候旧版本的数据包索引可能会干扰新请求的成功完成,因此有必要清理 YUM 的缓存后再重新尝试获取最新的资料: ```bash dnf clean all || yum clean all ``` #### 关闭 SELinux 和防火墙临时测试 为了排除安全策略的影响,在不影响生产环境的前提下可考虑短暂停用 SELinux 及防火墙组件做进一步排查工作。不过需要注意的是这只是作为诊断手段之一,并不适合长期应用在正式环境中[^5]。 通过上述方法一般能够有效处理大部分由于配置失误所引起的无法成功拉取远程仓库信息的情形。当然具体原因还需结合实际情况分析日志记录才能得出确切结论。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值