Programming Mobile Devices: An Introduction for Practitioners

本书为移动系统编程提供全面实用的介绍,不局限于特定技术或设备,而是评估所有移动软件平台共通的组件区域和问题。涵盖内存管理、应用程序概念、动态链接库、并发、本地资源处理、网络及安全性等内容。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

版权声明:原创作品,允许转载,转载时请务必以超链接形式标明文章原始出版、作者信息和本声明。否则将追究法律责任。 http://blog.youkuaiyun.com/topmvp - topmvp
Learn how to programme the mobile devices of the future!

importance of mobile systems programming has emerged over the recent years as a new domain in software development. The design of software that runs in a mobile device requires that developers combine the rules applicable in embedded environment; memory-awareness, limited performance, security, and limited resources with features that are needed in workstation environment; modifiability, run-time extensions, and rapid application development.

gramming Mobile Devices is a comprehensive, practical introduction to programming mobile systems. The book is a platform independent approach to programming mobile devices: it does not focus on specific technologies, and devices, instead it evaluates the component areas and issues that are common to all mobile software platforms. This text will enable the designer to programme mobile devices by mastering both hardware-aware and application-level software, as well as the main principles that guide their design.

Programming Mobile Devices:
*rovides a complete and authoritative overview of programming mobile systems.
*iscusses the major issues surrounding mobile systems programming; such as understanding of embedded systems and workstation programming.
*overs memory management, the concepts of applications, dynamically linked libraries, concurrency, handling local resources, networking and mobile devices as well as security features.
*ses generic examples from JavaTM and Symbian OS to illustrate the principles of mobile device programming

http://rapidshare.com/files/33086220/0470057386.rar
http://depositfiles.com/files/910167
基于C2000 DSP的电力电子、电机驱动和数字滤波器的仿真模型构建及其C代码实现方法。首先,在MATLAB/Simulink环境中创建电力电子系统的仿真模型,如三相逆变器,重点讨论了PWM生成模块中死区时间的设置及其对输出波形的影响。接着,深入探讨了C2000 DSP内部各关键模块(如ADC、DAC、PWM定时器)的具体配置步骤,特别是EPWM模块采用上下计数模式以确保对称波形的生成。此外,还讲解了数字滤波器的设计流程,从MATLAB中的参数设定到最终转换为适用于嵌入式系统的高效C代码。文中强调了硬件在环(HIL)和支持快速原型设计(RCP)的重要性,并分享了一些实际项目中常见的陷阱及解决方案,如PCB布局不当导致的ADC采样异常等问题。最后,针对中断服务程序(ISR)提出了优化建议,避免因ISR执行时间过长而引起的系统不稳定现象。 适合人群:从事电力电子、电机控制系统开发的技术人员,尤其是那些希望深入了解C2000 DSP应用细节的研发工程师。 使用场景及目标:①掌握利用MATLAB/Simulink进行电力电子设备仿真的技巧;②学会正确配置C2000 DSP的各项外设资源;③能够独立完成从理论设计到实际产品落地全过程中的各个环节,包括但不限于数字滤波器设计、PWM信号生成、ADC采样同步等。 其他说明:文中提供了大量实用的代码片段和技术提示,帮助读者更好地理解和实践相关知识点。同时,也提到了一些常见错误案例,有助于开发者规避潜在风险。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值