kindle4.1.1越狱_kindle4.1.4-优快云博客

本文提供了一种针对Kindle4设备版本从4.0.0到4.1.1的越狱方法，该方法主要通过安装开发者密钥实现，并允许用户通过Kindle自身的更新机制安装额外的应用程序包。教程详细介绍了如何将必要文件复制到Kindle的USB驱动器根目录，进入诊断模式并完成重启的过程。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

Kindle4NTHacking

转载自：

Jailbreak

The jailbreak itself does not yet allow you to do much. In fact, it only installs an additional "developer" key on the device, allowing for the installation of additional packages via the Kindle's own update mechanism.

This method works on Kindle 4 version 4.0.0 through 4.1.1.

Carefully read all of the instructions below, and follow them only after you have read everything and are sure what to do.

Universal method

Kindle in Diagnostics Mode.

Download and unzip the jailbreak.

Plug in the Kindle and copy the data.tar.gz & ENABLE_DIAGS files plus the diagnostic_logs folder to the Kindle's USB drive's root
Safely remove the USB cable and restart the Kindle (Menu -> Settings -> Menu -> Restart)
Once the device restarts into diagnostics mode, select "D) Exit, Reboot or Disable Diags" (using the 5-way keypad)
Select "R) Reboot System" and "Q) To continue" (following on-screen instructions, when it tells you to use 'FW Left' to select an option, it means left on the 5-way keypad)
Wait about 20 seconds: you should see the Jailbreak screen for a while, and the device should then restart normally
After the Kindle restarts, you should see a new book titled "You are Jailbroken", if you see this, the jailbreak has been successful.