Updating the flat file of an iSCSI target in AIX

最新推荐文章于 2024-06-07 22:08:11 发布

转载最新推荐文章于 2024-06-07 22:08:11 发布 · 745 阅读

文章标签：

#file #aix #authentication #character #comments #login

iSCSI 专栏收录该内容

9 篇文章

订阅专栏

Files Reference

targets File

Purpose

Defines iSCSI targets that will be accessed by the iSCSI software initiator.

Description

The iSCSI targets file defines the name and location of the iSCSI targets that the iSCSI software initiator will attempt to access. This file is read any time the iSCSI software initiator driver is loaded.

Any line in this file that begins with "#" will be treated as a comment line and ignored. Other non-blank lines will define a target that the iSCSI software initiator will access. The "/" character may be used between fields as a line continuation character in order to make the file more readable.

The shipped version of this file contains comments that precisely define the format of the file. However, there are no default target names; the shipped file contains only comments. In order to use the iSCSI software initiator, the user must add target definitions to the file and then reload the iSCSI driver by running cfgmgr or by rebooting the system.

Each target is defined by three or four fields, as follows:

HostNameOrAddress PortNumber iSCSIName

HostNameOrAddress PortNumber iSCSIName CHAPSecret

The fields that define the target are:

HostNameOrAddress

This is the TCP/IP location of the target. The location may be specified by a TCP/IP address in dotted-decimal form, or by a host name which can be resolved to a valid TCP/IP address. The format for the IP Address is taken from RFC2373.

PortNumber

The TCP/IP port number on which the iSCSI target is listening. The standard port number for iSCSI is 3260, but some targets may allow customizing the port number, so this field must be specified.

iSCSIName

The iSCSI name of the target. This name must match the name defined to the target. Note that the iSCSI name will be converted to contain all lower case characters, in accordance with the iSCSI standards.

CHAPSecret

This optional field specifies the secret to be used by this initiator if CHAP authentication is required. The secret is a text string enclosed in double-quote characters. If this field is included in the target line, the iSCSI software initiator will offer CHAP authentication to the target, and if the target requests such authentication, this value will be used as the secret during the authentication process. If the CHAPSecret field is not included in the target definition, the initiator will attempt to log in to the target without any authentication.

Examples

iSCSI Target without CHAP(MD5) authentication - Assume the target is at address 192.168.3.2 and the valid port is 5003. The name of the target is iqn.com.ibm-4125-23wwt26. The target line would look like the following:
```
192.168.3.2 5003 iqn.com.ibm-4125-23wwt26
```
iSCSI Target with CHAP(MD5) authentication - Assume the target is at address 10.2.1.105 and the valid port is 3260. The name of the target is iqn.com.ibm-k167-42.fc1a and the CHAP secret is "This is my password." The target line would look like the following:
```
10.2.1.105 3260 iqn.com.ibm-k167-42.fc1a "This is my password."
```
iSCSI Target with CHAP(MD5) authentication and line continuation - Assume the target is at address iscsi.fake.com and the valid port is 3260. The name of the target is iqn.2003-01.com.ibm:00.fcd0ab21.shark128 and the CHAP secret is "123ismysecretpassword.fc1b". The target line would look like the following:
```
 iscsi.fake.com 3260 iqn.2003-01.com.ibm:00.fcd0ab21.shark128 / 		
                "123ismysecretpassword.fc1b"
```