Tomcat发布网站知识集锦(转载)

修改端口、修改默认发布目录、多域名绑定

 

一、修改发布端口号为80(Tomcat默认为8080)

    打开配置文件(我的如下:E:\J2EEServer\Tomcat 6.0\conf\server.xml),找到:

<Connector port="8080" protocol="HTTP/1.1"

             maxThreads="150" connectionTimeout="20000"

             redirectPort="8443" />

修改后:

<Connector port="80" protocol="HTTP/1.1"

             maxThreads="150" connectionTimeout="20000"

             redirectPort="8443" />

其实这里就是把port:8080,修改成port:80就可以了,其他的参数不变。这样客户机在访问服务器时直接输入IP或域名就可以了。

 

二、修改tomcat的字符集

大家在写程序中应该都遇到过中文乱码的问题,除了保证页面、数据库的字符集保持一致外还有一点需要注意,就是tamcat的字符集。有时从头到尾的检查程序,发现程序一切正常,可就是有乱码,看看Tomcat的字符集吧!找到E:\Tomcat 6.0\conf\server.xml:

<Connector port="80" protocol="HTTP/1.1"

             maxThreads="150" connectionTimeout="20000"

             redirectPort="8443" />

修改后:

<Connector port="80" protocol="HTTP/1.1"

             maxThreads="150" connectionTimeout="20000"

             redirectPort="8443" URIEncoding="UTF-8"/>

 

三、修改tomcat发布路径(默认路径:E:\J2EEServer\Tomcat 6.0\webapps\ROOT)

    打开配置文件(我的在:E:\J2EEServer\Tomcat 6.0\conf\server.xml),找到:

<Engine name="Catalina" defaultHost="localhost">

<Host name="localhost"  appBase="webapps"

            unpackWARs="true" autoDeploy="true"

            xmlValidation="false" xmlNamespaceAware="false">     

</Host>

</Engine>

在<host></host>标签之间添加上:

<Context path="" docBase="photo" debug="0" reloadable="true" />

path是说明虚拟目录的名字,如果你要只输入ip地址就显示主页,则该键值留为空;

docBase是虚拟目录的路径,它默认的是$tomcat/webapps/ROOT目录,现在我在webapps目录下建了一个photo目录,让该目录作为我的默认目录。debug和reloadable一般都分别设置成0和true。

这样,再访问服务器时就找$tomcat/webapps/photo下的页面了~~~~~

 

三、多域名绑定

打开配置文件(我的如下:D:\Program Files\Tomcat\conf\server.xml),找到:

<Engine name="Catalina" defaultHost="localhost">

<Host name="localhost"  appBase="webapps"

            unpackWARs="true" autoDeploy="true"

            xmlValidation="false" xmlNamespaceAware="false">     

    </Host>

</Engine>

 

方案一:多个工程在不同的目录下

<Engine name="Catalina" defaultHost="pic.niejingyu.com">

    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"

             resourceName="UserDatabase"/>

 

    <Host name="xixi.niejingyu.com"  appBase="abcapps"

            unpackWARs="true" autoDeploy="true"

            xmlValidation="false" xmlNamespaceAware="false">

</Host>

 

    <Host name="haha.niejingyu.com"  appBase="D:\Program Files\Tomcat\test"

            unpackWARs="true" autoDeploy="true"

            xmlValidation="false" xmlNamespaceAware="false">

</Host>

 

    <Host name="lala.niejingyu.com"  appBase="webapps"

            unpackWARs="true" autoDeploy="true"

            xmlValidation="false" xmlNamespaceAware="false">

    </Host>

</Engine>

 

测试在C:\WINDOWS\system32\drivers\etc下的hosts文件中添加如下内容:

127.0.0.1 xixi.niejingyu.com

127.0.0.1 lala.niejingyu.com

127.0.0.1 haha.niejingyu.com

 

按照上面的配置:

1. http://xixi.niejingyu.com 访问 ${tomcat}\ abcapps\ROOT 下的网站

2. http://haha.niejingyu.com 访问 D:\Program Files\Tomcat\test\ROOT 下的网站

3. http://lala.niejingyu.com 访问 ${tomcat}\webapps\ROOT 下的网站.

 

Engine的dafaultHost:表示访问该tomcat默认进入的主机,注意一定不能是localhost,不然别人通过你的ip访问,就会默认进入tomcat的管理界面.

Host 的 name:表示该主机绑定的域名,如果绑定localhost则可以通过在浏览器中输入localhost访问该Host.

Host的 appBase:表示该主机绑定的文件存放路径,可以使用相对路径或绝对路径.

 

方案二:多个工程在同一目录webapps下,即在不同的<host></host>里面配<Context>

<Engine name="Catalina" defaultHost="xixi.niejingyu.com">

    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"

        resourceName="UserDatabase"/>

 

    <Host name="xixi.niejingyu.com"  appBase="webapps"

        unpackWARs="true" autoDeploy="true"

        xmlValidation="false" xmlNamespaceAware="false">

       <Context path="" docBase="test1" debug="0" reloadable="true" />

</Host>

 

<Host name="haha.niejingyu.com"  appBase="webapps"

        unpackWARs="true" autoDeploy="true"

        xmlValidation="false" xmlNamespaceAware="false">

       <Context path="" docBase="test2" debug="0" reloadable="true" />

</Host>

 

<Host name="lala.niejingyu.com"  appBase="webapps"

        unpackWARs="true" autoDeploy="true"

        xmlValidation="false" xmlNamespaceAware="false">

       <Context path="" docBase="test3" debug="0" reloadable="true" />

</Host>

 

测试:

http://xixi.niejingyu.com 访问的是 ${tomcati}\webapps\test1下的网站

http://haha.niejingyu.com访问的是 ${tomcati}\webapps\test2下的网站

http://lala.niejingyu.com访问的是 ${tomcati}\webapps\test3下的网站

 

以上转载地址是http://xiaopihai.iteye.com/blog/418757

 

自我理解

1.一个tomcat下只能有一个www开头的项目.

2.不能存在两个www开头的项目在host文件中.

3.不以www开头的域名,访问时不能加www,否则不能访问.

Lumerical Python API实战指南(一)——从数据优化到自动化工作流 本文是Lumerical Python API实战指南,旨在帮助用户从繁琐的手动仿真操作转向智能自动化工作流。文章详细介绍了API环境的零基础搭建、核心操作(会话管理、命令执行与数据交换),并通过参数扫描与自动化分析流水线的实战案例,展示了如何利用Python脚本实现从数据优化到自动化仿真的全过程,显著提升光子设计效率。 阅读详情

相关推荐

ABtest描述统计功效

我们在面试数据分析时,常常会问到如何确定样本量的问题,会有一个指标:统计功效(power),或者是1-β 统计功效会影响实验的可信度,甚至会影响实验所需的样本量,要了解统计功效,首先要理解两类统计错误 假如我们做了一个AB实验,且两组用户的数据均值为μ1和μ2,我们会有两个初始假设: H0:两个实验组的数据没有差别(μ1=μ2),这个假设也叫“零假设”,也叫原假设 H1:两个实验组之间的数据存在差别(μ1≠μ2),这个假设也叫“非零假设”,也叫备择假设 定义两类错误: 实验本身没有效应,但我们觉

qq_38134556的博客 907

Tomcat发布网站知识集锦

修改端口、修改默认发布目录、多域名绑定 一、修改发布端口号为80(Tomcat默认为8080) 打开配置文件(我的如下:E:\J2EEServer\Tomcat 6.0\conf\server.xml),找到: [code="java"] [/code] 修改后: [code="java"][/code] 其实这里就是把port:8080,修改...

maqianmaqian的专栏 133

STM32 USART高级功能全解析:IrDA、DMA、硬件流控与低功耗唤醒

USART是嵌入式系统中最基础的串行通信外设,其核心原理在于同步/异步时序控制与数据帧收发机制。现代MCU如STM32通过深度集成IrDA调制解调、DMA直传通道、RS232/RS485硬件流控及Stop模式唤醒等扩展能力,显著提升通信可靠性、吞吐效率与能效比。其中,IrDA SIR采用RZI编码实现抗干扰红外传输,DMA通过TXE/RXNE事件驱动实现零CPU干预的连续数据流,而硬件流控(RTS/CTS/DE)和低功耗唤醒(WUF+UESM)则分别保障工业现场鲁棒性与电池级超长待机。本文围绕STM32平台

weixin_28922227的博客 211

Tomcat中发布多个项目,用不同的端口;以及多个tomcat同时运行端口冲突问题

在一个Tomcat下配置多个服务,用不同的端口号 一台机器运行多个tomcat行,容易发生端口冲突,需要更改端口,需要改的有三个地方:

m0_62342566的博客 2456

大学物理第二章 质点动力学详解

大学物理第二章 质点动力学概念详解

weixin_63026364的博客 1万+

python 写一个简单的 telegram bot (电报机器人)

replit.com 环境配置太恶心了,只能使用 poetry.poetry 这个名字是挺好听,用起来也是很垃圾,太恶心。heroku.com 注册登录不方便,需要各种验证。所以,部署的问题,目前搁置。

waterHBO的博客 3199

修改tomcat端口、发布路径等问题

一、修改tomcat的端口 在默认情况下,tomcat的占用端口是8080,用如下方法可以修改Tomcat的端口号。进入Tomcat的根(安装)目录下,有一个conf文件夹,双击进入conf文件夹,找到Server.xml文件,打开该文件。然后在文件中找到如下文本: <Connector port="8080" protocol="HTTP/1.1" ma

sixi_sky的博客 8924

告别手动烧录!给STM32H750外挂Flash制作Keil专用下载算法(保姆级避坑指南)

本文详细介绍了为STM32H750外挂Flash开发Keil专用下载算法的全过程,从原理到实战操作,特别针对QSPI Flash的配置和优化提供了保姆级避坑指南。通过定制下载算法,开发者可以告别手动烧录,实现一键下载到外部Flash,大幅提升开发效率。

weixin_42567497的博客 255

Tomcat发布项目 端口号配置

修改Tomcat服务中的端口配置: 分别修改安装目录下的conf子目录中的server.xml文件(注意:两个文件中对应的端口号要不一样),修改如下 : a、 修改Shutdown端口(默认为8005端口),将8005修改为没有在使用的端口号,例如8055。 <Server port="8005" shutdown="SHUTDOWN" debug="0"> b、修改http访问端口(默认为8080端口),将8080修改为tomcat不在使用的端口号。此处所设的端口号即是以...

二手程序员 1199

Scipy优化踩坑实录:trust-constr和SLSQP约束定义到底差在哪?

本文深入解析了Scipy优化模块中trust-constr和SLSQP两种方法在约束定义上的差异。通过对比面向对象的trust-constr和字典式定义的SLSQP,揭示了它们各自的优势与适用场景,帮助开发者在有约束优化问题中选择合适的算法,提升计算效率与准确性。

weixin_42573113的博客 271

OpenClaw实战系列01:OpenClaw接入飞书机器人全接入指南 + Ollama本地大模型

通过 OpenClaw + Ollama + 飞书的组合,我们成功搭建了一个完全私有、免费、可定制的AI助理。它不仅能在日常聊天中提供帮助,还能通过OpenClaw强大的“技能”体系,真正去操作你的电脑、管理文件、甚至执行代码。这套方案将数据留在本地,既保证了隐私安全,又锻炼了动手能力。现在,去给你的AI助理添加更多酷炫的技能吧!

PeterPan的博客 1万+

修改tomcat端口号并部署项目

1.背景 今天部署xxl-job的admin调度平台,在同一台服务器上执行调度平台和定时任务。 需要修改tomcat的端口号。 2.方法 打开tomcat 的 conf 目录 cd conf ,vim打开 server.xml 编辑器 在改之前可以先查看已经使用的端口号,将8080 改为 9033 。 讲此处的端口号也做更改,改为 8772。 将此处的端口号也做更改,改为8056. 改之后...

Assassinhanc的博客 2310

实战指南:理解 ThreadLocal 原理并用于Java 多线程上下文管理

探讨如何基于实现一个高效的上下文管理组件,以解决多线程环境下的数据共享和上下文管理这些问题。通过具体的代码示例和实战展示如何为多线程编程提供一种简洁而高效的上下文管理方案。

曾经“等你生日那天”都遥远得像未来,如今却可欢愉的挥手说“下个十年见” 11万+

Tomcat重点集锦

一.Tomcat重点内容:重点内容1: Tomcat应用场景:1.tomcat是java语言的容器,提供Servlet和jsp的一个接口(API),支持解析java语言开发的网站,网页后缀为.jsp2.解析java的web站点的中间件:IBM的websphere及oracle(甲骨文)的weblogic,另外redhat(红帽)的Jboss。3.tomcat项目早期名catalina,很多tom...

weixin_34248849的博客 443

TMS_WebGMaps_1.9.8.0_Full_Source

TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder

jre9下载 jdk9

(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】

Linux下安装Tomcat,2024年最新oppoLinux运维面试

重启Apache或Nginx,现在使用浏览器访问 http://server:8080,出现tomcat默认页面,说明已经安装成功。6)安装界面会出现授权协议,按Enter键接受,把jdk安装在/usr/java/jdk1.6.0_01。2、在工作中,运维人员经常需要跟运营人员打交道,请问运营人员是做什么工作的?6、Squid、Varinsh和Nginx有什么区别,工作中你怎么选择?5、LVS、Nginx、HAproxy有什么区别?7、Tomcat和Resin有什么区别,工作中你怎么选择?

2401_83739821的博客 865

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

一台机子运行多个tomcat 多域名绑定

[b][size=small]一台机子运行多个tomcat 多域名绑定[/size][/b] [size=small][size=x-small] 一、一台机子运行多个tomcat 如果不加任何修改,在一台服务器上同时运行两个Tomcat服务显然会发生端口冲突。假设现在已经按照正常的方式安装配置好了第一个Tomcat,第二个如何设置呢?以...

wei329937021的博客 238

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

Linux工具集锦

操作系统:Centos,Freebsd,Ubuntu,Redhatlinux,suselinux网站服务:apache,nginx,lighttpd,php,tomcat,resin数据库:Mysql,PostgreSQL,Mysql-proxy,MariaDB代理相关:lvs,keepalived,haproxy,nginx,apache,heartbeat网站缓存...

weixin_34391445的博客 109

Eclipse for Java EE软件操作集锦(二)

个人博客地址:https://www.vastyun.com 看本文章之前请确保已经了解eclipse建立web工程,如果有疑问请查看本系列文章第一篇eclipse软件操作集锦(一) 1.我们添加一个servlet 配置一下web.xml测试一下是否能正常显示。如图所示: servlet和web.xml文件内容如下。 1 package com.vastsum; ...

weixin_33800463的博客 115

WebEffect网页特效集锦系统(开源)

2019独角兽企业重金招聘Python工程师标准>>> ...

weixin_34126215的博客 125

Linux最新zabbix监控Linux系统服务_linux 查看 zabbix agent 状态(2),2024最新Linux运维开发面试解答

最全的Linux教程,Linux从入门到精通第一份《Linux从入门到精通》466页内容简介====本书是获得了很多读者好评的Linux经典畅销书**《Linux从入门到精通》的第2版**。本书第1版出版后曾经多次印刷,并被51CTO读书频道评为“最受读者喜爱的原创IT技术图书奖”。本书第﹖版以最新的Ubuntu 12.04为版本,循序渐进地向读者介绍了Linux 的基础应用、系统管理、网络应用、娱乐和办公、程序开发、服务器配置、系统安全等。本书附带1张光盘,内容为本书配套多媒体教学视频。

时间与思念 837

UEditor1.2.6.0在.net环境下使用

UEditor1.2.6.0 1.百度百科词条 2.UEditor官方网站 【CKEditor+CKFinder的配置实用,可查看博主另一篇文章】 第一次接触UEditor还是在2011年的下半年里,当时由于需要找一款富文本编辑器进行新闻的网站开发,当时UEditor异常较多,就将注意力集中在了(F)CKEditor上。今天偶然间翻出以前的代码,发现UEditor已经有了质的的提高,从官...

weixin_30794499的博客 198

单个Tomcat多端口部署web项目

单个 Tomcat 运行多个实例、分配不同端口 第一种方式:更改 Connector 中的端口号 <?xml version="1.0" encoding="UTF-8"?> <Server port="8005" shutdown="SHUTDOWN"> <Listener className="org.apache.catalina.start...

Jerry 593

Tomcat的端口配置

1.通过配置文件修改Tomcat端口号 首先:Tomcat端口号默认使用的是8080端口,没有修改的情况下都是8080 我们可以通过server.xml文件修改Tomcat的端口号 server.xml文件在哪? 首先找到Tomcat目录: conf目录下存放的是tomcat的配置文件。 打开会发现有一个server.xml的配置文件,用文本编辑器打开(带有颜色,易于区分注释与代码...

qq_40180411的博客 7万+
上一篇: css 去掉textarea,input,select中的选中焦点框
下一篇: 怎样理解LoadRunner的pacing和think time
tempdowncomputer
博客等级 码龄16年 2粉丝 405原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值