lnmp安装到config-set succeeded的时候卡住,解决办法

本文介绍了解决在使用LNMP1.3安装过程中遇到的Composer安装卡顿问题的方法。通过修改include/php.sh文件中的Install_Composer函数,并重新运行安装脚本,可以避免因下载国外资源导致的安装延迟。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

我说的lnmp是在lnmp.org下载的lnmp1.3

编辑include/php.sh(文件名是小写的), 将Install_Composer函数里面的内容改为return。保存,重新安装lnmp。

这里写图片描述

然后重新运行 ./install.sh

原因:
由于安装composer的时候,由于下载国外资源造成的卡顿。
composer是php的包管理器(类似360的软件管家),你要项目需要什么库或者组件的时候,利用composer可以很方便的进行下载。
一般这个可以在用到的时候再安装也不迟。

正在下载面板文件,请稍等................... ============================================== --2025-07-03 15:11:30-- https://hk1-node.bt.cn/install/src/panel6.zip Resolving hk1-node.bt.cn (hk1-node.bt.cn)... 103.179.243.14 Connecting to hk1-node.bt.cn (hk1-node.bt.cn)|103.179.243.14|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 52858191 (50M) [application/zip] Saving to: ‘panel.zip’ panel.zip 100%[================================================================================================================>] 50.41M 6.18MB/s in 11s 2025-07-03 15:11:41 (4.59 MB/s) - ‘panel.zip’ saved [52858191/52858191] --2025-07-03 15:11:43-- https://hk1-node.bt.cn/install/src/bt7.init Resolving hk1-node.bt.cn (hk1-node.bt.cn)... 103.179.243.14 Connecting to hk1-node.bt.cn (hk1-node.bt.cn)|103.179.243.14|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 18807 (18K) [application/octet-stream] Saving to: ‘/etc/init.d/bt’ /etc/init.d/bt 100%[================================================================================================================>] 18.37K --.-KB/s in 0.03s 2025-07-03 15:11:44 (609 KB/s) - ‘/etc/init.d/bt’ saved [18807/18807] --2025-07-03 15:11:44-- https://hk1-node.bt.cn/install/src/bt7.init Resolving hk1-node.bt.cn (hk1-node.bt.cn)... 103.179.243.14 Connecting to hk1-node.bt.cn (hk1-node.bt.cn)|103.179.243.14|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 18807 (18K) [application/octet-stream] Saving to: ‘/www/server/panel/init.sh’ /www/server/panel/init.sh 100%[================================================================================================================>] 18.37K --.-KB/s in 0.03s 2025-07-03 15:11:44 (593 KB/s) - ‘/www/server/panel/init.sh’ saved [18807/18807] --2025-07-03 15:11:44-- https://hk1-node.bt.cn/install/conf/softList.conf Resolving hk1-node.bt.cn (hk1-node.bt.cn)... 103.179.243.14 Connecting to hk1-node.bt.cn (hk1-node.bt.cn)|103.179.243.14|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 2250 (2.2K) [application/octet-stream] Saving to: ‘/www/server/panel/data/softList.conf’ /www/server/panel/data/softList.conf 100%[================================================================================================================>] 2.20K --.-KB/s in 0s 2025-07-03 15:11:44 (87.4 MB/s) - ‘/www/server/panel/data/softList.conf’ saved [2250/2250] Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: docxtpl==0.16.7 in /www/server/panel/pyenv/lib/python3.7/site-packages (0.16.7) Requirement already satisfied: six in /www/server/panel/pyenv/lib/python3.7/site-packages (from docxtpl==0.16.7) (1.16.0) Requirement already satisfied: python-docx in /www/server/panel/pyenv/lib/python3.7/site-packages (from docxtpl==0.16.7) (1.1.0) Requirement already satisfied: docxcompose in /www/server/panel/pyenv/lib/python3.7/site-packages (from docxtpl==0.16.7) (1.4.0) Requirement already satisfied: jinja2 in /www/server/panel/pyenv/lib/python3.7/site-packages (from docxtpl==0.16.7) (3.1.3) Requirement already satisfied: lxml in /www/server/panel/pyenv/lib/python3.7/site-packages (from docxtpl==0.16.7) (5.2.1) Requirement already satisfied: setuptools in /www/server/panel/pyenv/lib/python3.7/site-packages (from docxcompose->docxtpl==0.16.7) (65.5.0) Requirement already satisfied: babel in /www/server/panel/pyenv/lib/python3.7/site-packages (from docxcompose->docxtpl==0.16.7) (2.14.0) Requirement already satisfied: typing-extensions in /www/server/panel/pyenv/lib/python3.7/site-packages (from python-docx->docxtpl==0.16.7) (4.7.1) Requirement already satisfied: MarkupSafe>=2.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from jinja2->docxtpl==0.16.7) (2.1.5) Requirement already satisfied: pytz>=2015.7 in /www/server/panel/pyenv/lib/python3.7/site-packages (from babel->docxcompose->docxtpl==0.16.7) (2024.1) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: pymongo in /www/server/panel/pyenv/lib/python3.7/site-packages (4.6.3) Requirement already satisfied: dnspython<3.0.0,>=1.16.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from pymongo) (2.3.0) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: psycopg2-binary in /www/server/panel/pyenv/lib/python3.7/site-packages (2.9.9) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: flask in /www/server/panel/pyenv/lib/python3.7/site-packages (2.2.5) Requirement already satisfied: Werkzeug>=2.2.2 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask) (2.2.3) Requirement already satisfied: Jinja2>=3.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask) (3.1.3) Requirement already satisfied: itsdangerous>=2.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask) (2.1.2) Requirement already satisfied: click>=8.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask) (8.1.7) Requirement already satisfied: importlib-metadata>=3.6.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask) (6.7.0) Requirement already satisfied: zipp>=0.5 in /www/server/panel/pyenv/lib/python3.7/site-packages (from importlib-metadata>=3.6.0->flask) (3.15.0) Requirement already satisfied: typing-extensions>=3.6.4 in /www/server/panel/pyenv/lib/python3.7/site-packages (from importlib-metadata>=3.6.0->flask) (4.7.1) Requirement already satisfied: MarkupSafe>=2.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from Jinja2>=3.0->flask) (2.1.5) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: flask-sock in /www/server/panel/pyenv/lib/python3.7/site-packages (0.7.0) Requirement already satisfied: flask>=2 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask-sock) (2.2.5) Requirement already satisfied: simple-websocket>=0.5.1 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask-sock) (0.10.0) Requirement already satisfied: Werkzeug>=2.2.2 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask>=2->flask-sock) (2.2.3) Requirement already satisfied: Jinja2>=3.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask>=2->flask-sock) (3.1.3) Requirement already satisfied: itsdangerous>=2.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask>=2->flask-sock) (2.1.2) Requirement already satisfied: click>=8.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask>=2->flask-sock) (8.1.7) Requirement already satisfied: importlib-metadata>=3.6.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from flask>=2->flask-sock) (6.7.0) Requirement already satisfied: wsproto in /www/server/panel/pyenv/lib/python3.7/site-packages (from simple-websocket>=0.5.1->flask-sock) (1.2.0) Requirement already satisfied: zipp>=0.5 in /www/server/panel/pyenv/lib/python3.7/site-packages (from importlib-metadata>=3.6.0->flask>=2->flask-sock) (3.15.0) Requirement already satisfied: typing-extensions>=3.6.4 in /www/server/panel/pyenv/lib/python3.7/site-packages (from importlib-metadata>=3.6.0->flask>=2->flask-sock) (4.7.1) Requirement already satisfied: MarkupSafe>=2.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from Jinja2>=3.0->flask>=2->flask-sock) (2.1.5) Requirement already satisfied: h11<1,>=0.9.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from wsproto->simple-websocket>=0.5.1->flask-sock) (0.14.0) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Collecting gevent Downloading https://mirrors.tencent.com/pypi/packages/5b/02/22dad5a61fa2a5ae56e6d4869f5d70dc18df9a89dff2ffe50d8268aad4b0/gevent-22.10.2-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (6.0 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.0/6.0 MB 9.6 MB/s eta 0:00:00 Collecting zope.event (from gevent) Downloading https://mirrors.tencent.com/pypi/packages/fe/42/f8dbc2b9ad59e927940325a22d6d3931d630c3644dae7e2369ef5d9ba230/zope.event-5.0-py3-none-any.whl (6.8 kB) Collecting zope.interface (from gevent) Downloading https://mirrors.tencent.com/pypi/packages/09/06/7c1202972bc99dd1b731c3c01157855cbc8d0944894c3b234473b1f4119c/zope.interface-6.4.post2.tar.gz (294 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 294.5/294.5 kB 8.1 MB/s eta 0:00:00 Preparing metadata (setup.py) ... done Collecting setuptools (from gevent) Downloading https://mirrors.tencent.com/pypi/packages/c7/42/be1c7bbdd83e1bfb160c94b9cafd8e25efc7400346cf7ccdbdb452c467fa/setuptools-68.0.0-py3-none-any.whl (804 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 804.0/804.0 kB 8.9 MB/s eta 0:00:00 Collecting greenlet>=2.0.0 (from gevent) Downloading https://mirrors.tencent.com/pypi/packages/fd/ac/a67e69bb4e3a9ae73ea88fa996f8cf1fc5609e0ca864e0c6f82ba42be70e/greenlet-3.1.1-cp37-cp37m-manylinux_2_24_x86_64.manylinux_2_28_x86_64.whl (562 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 563.0/563.0 kB 8.2 MB/s eta 0:00:00 Building wheels for collected packages: zope.interface Building wheel for zope.interface (setup.py) ... done Created wheel for zope.interface: filename=zope.interface-6.4.post2-cp37-cp37m-linux_x86_64.whl size=238253 sha256=38898bb69abdcf801a3f9ea3cf5f12f8931a2a6f36fffe989692eadee5867bb7 Stored in directory: /root/.cache/pip/wheels/61/b1/03/bdb0c69123389b3d6138e9cff90af5d2c4fefceb5d7c55f58d Successfully built zope.interface Installing collected packages: setuptools, greenlet, zope.interface, zope.event, gevent Successfully installed gevent-22.10.2 greenlet-3.0.3 setuptools-65.5.0 zope.event-5.0 zope.interface-6.3 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: simple-websocket==0.10.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (0.10.0) Requirement already satisfied: wsproto in /www/server/panel/pyenv/lib/python3.7/site-packages (from simple-websocket==0.10.0) (1.2.0) Requirement already satisfied: h11<1,>=0.9.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from wsproto->simple-websocket==0.10.0) (0.14.0) Requirement already satisfied: typing-extensions in /www/server/panel/pyenv/lib/python3.7/site-packages (from h11<1,>=0.9.0->wsproto->simple-websocket==0.10.0) (4.7.1) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: natsort in /www/server/panel/pyenv/lib/python3.7/site-packages (8.4.0) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv WARNING: Skipping enum34 as it is not installed. WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: geoip2==4.7.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (4.7.0) Requirement already satisfied: aiohttp<4.0.0,>=3.6.2 in /www/server/panel/pyenv/lib/python3.7/site-packages (from geoip2==4.7.0) (3.8.6) Requirement already satisfied: maxminddb<3.0.0,>=2.3.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from geoip2==4.7.0) (2.4.0) Requirement already satisfied: requests<3.0.0,>=2.24.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from geoip2==4.7.0) (2.31.0) Requirement already satisfied: attrs>=17.3.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (23.2.0) Requirement already satisfied: charset-normalizer<4.0,>=2.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (3.3.2) Requirement already satisfied: multidict<7.0,>=4.5 in /www/server/panel/pyenv/lib/python3.7/site-packages (from aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (6.0.5) Requirement already satisfied: async-timeout<5.0,>=4.0.0a3 in /www/server/panel/pyenv/lib/python3.7/site-packages (from aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (4.0.3) Requirement already satisfied: yarl<2.0,>=1.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (1.9.4) Requirement already satisfied: frozenlist>=1.1.1 in /www/server/panel/pyenv/lib/python3.7/site-packages (from aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (1.3.3) Requirement already satisfied: aiosignal>=1.1.2 in /www/server/panel/pyenv/lib/python3.7/site-packages (from aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (1.3.1) Requirement already satisfied: asynctest==0.13.0 in /www/server/panel/pyenv/lib/python3.7/site-packages (from aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (0.13.0) Requirement already satisfied: typing-extensions>=3.7.4 in /www/server/panel/pyenv/lib/python3.7/site-packages (from aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (4.7.1) Requirement already satisfied: idna<4,>=2.5 in /www/server/panel/pyenv/lib/python3.7/site-packages (from requests<3.0.0,>=2.24.0->geoip2==4.7.0) (3.7) Requirement already satisfied: urllib3<3,>=1.21.1 in /www/server/panel/pyenv/lib/python3.7/site-packages (from requests<3.0.0,>=2.24.0->geoip2==4.7.0) (1.25.11) Requirement already satisfied: certifi>=2017.4.17 in /www/server/panel/pyenv/lib/python3.7/site-packages (from requests<3.0.0,>=2.24.0->geoip2==4.7.0) (2024.2.2) Requirement already satisfied: importlib-metadata in /www/server/panel/pyenv/lib/python3.7/site-packages (from attrs>=17.3.0->aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (6.7.0) Requirement already satisfied: zipp>=0.5 in /www/server/panel/pyenv/lib/python3.7/site-packages (from importlib-metadata->attrs>=17.3.0->aiohttp<4.0.0,>=3.6.2->geoip2==4.7.0) (3.15.0) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: brotli in /www/server/panel/pyenv/lib/python3.7/site-packages (1.1.0) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Looking in indexes: https://mirrors.tencent.com/pypi/simple Requirement already satisfied: PyMySQL in /www/server/panel/pyenv/lib/python3.7/site-packages/PyMySQL-0.9.3-py3.7.egg (0.9.3) WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv Starting Bt-Panel.... done Starting Bt-Tasks... done username: fdxyfajc Looking in indexes: https://mirrors.tencent.com/pypi/simple Collecting pyOpenSSl Downloading https://mirrors.tencent.com/pypi/packages/80/28/2659c02301b9500751f8d42f9a6632e1508aa5120de5e43042b8b30f8d5d/pyopenssl-25.1.0-py3-none-any.whl (56 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 56.8/56.8 kB 3.8 MB/s eta 0:00:00 Collecting cryptography<46,>=41.0.5 (from pyOpenSSl) Downloading https://mirrors.tencent.com/pypi/packages/05/2b/aaf0adb845d5dabb43480f18f7ca72e94f92c280aa983ddbd0bcd6ecd037/cryptography-45.0.5-cp37-abi3-manylinux_2_34_x86_64.whl (4.4 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.4/4.4 MB 8.6 MB/s eta 0:00:00 Collecting cffi>=1.14 (from cryptography<46,>=41.0.5->pyOpenSSl) Downloading https://mirrors.tencent.com/pypi/packages/93/d0/2e2b27ea2f69b0ec9e481647822f8f77f5fc23faca2dd00d1ff009940eb7/cffi-1.15.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (427 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 427.9/427.9 kB 4.7 MB/s eta 0:00:00 Collecting pycparser (from cffi>=1.14->cryptography<46,>=41.0.5->pyOpenSSl) Downloading https://mirrors.tencent.com/pypi/packages/62/d5/5f610ebe421e85889f2e55e33b7f9a6795bd982198517d912eb1c76e1a53/pycparser-2.21-py2.py3-none-any.whl (118 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.7/118.7 kB 3.5 MB/s eta 0:00:00 Installing collected packages: pycparser, cffi, cryptography, pyOpenSSl Successfully installed cffi-1.15.1 cryptography-42.0.5 pyOpenSSl-24.1.0 pycparser-2.21 ======================================== 正在开启面板SSL,请稍等............ ======================================== 证书开启成功! ======================================== Stopping Bt-Tasks... done Stopping Bt-Panel... done Starting Bt-Panel.... done Starting Bt-Tasks... done cat: /etc/redhat-release: No such file or directory cat: /etc/redhat-release: No such file or directory Last metadata expiration check: 0:02:44 ago on Thu 03 Jul 2025 03:09:50 PM CST. Dependencies resolved. ============================================================================================================================================================================================================ Package Architecture Version Repository Size ============================================================================================================================================================================================================ Installing: firewalld noarch 1.2.6-3.oc9 BaseOS 451 k Upgrading: iptables-legacy x86_64 1.8.9-3.oc9 BaseOS 109 k iptables-legacy-libs x86_64 1.8.9-3.oc9 BaseOS 28 k iptables-libs x86_64 1.8.9-3.oc9 BaseOS 325 k Installing dependencies: firewalld-filesystem noarch 1.2.6-3.oc9 BaseOS 8.5 k gobject-introspection x86_64 1.76.1-8.oc9 BaseOS 247 k ipset x86_64 7.19-3.oc9 BaseOS 42 k ipset-libs x86_64 7.19-3.oc9 BaseOS 69 k iptables-nft x86_64 1.8.9-3.oc9 BaseOS 184 k libnftnl x86_64 1.2.6-4.oc9 BaseOS 80 k nftables x86_64 1.0.8-6.oc9 BaseOS 406 k python3-firewall noarch 1.2.6-3.oc9 BaseOS 157 k python3-gobject-base x86_64 3.46.0-3.oc9 BaseOS 191 k python3-gobject-base-noarch noarch 3.46.0-3.oc9 BaseOS 192 k python3-nftables x86_64 1.0.8-6.oc9 BaseOS 19 k Transaction Summary ============================================================================================================================================================================================================ Install 12 Packages Upgrade 3 Packages Total download size: 2.4 M Downloading Packages: (1/15): firewalld-filesystem-1.2.6-3.oc9.noarch.rpm 132 kB/s | 8.5 kB 00:00 (2/15): ipset-7.19-3.oc9.x86_64.rpm 416 kB/s | 42 kB 00:00 (3/15): gobject-introspection-1.76.1-8.oc9.x86_64.rpm 1.4 MB/s | 247 kB 00:00 (4/15): firewalld-1.2.6-3.oc9.noarch.rpm 1.9 MB/s | 451 kB 00:00 (5/15): ipset-libs-7.19-3.oc9.x86_64.rpm 568 kB/s | 69 kB 00:00 (6/15): iptables-nft-1.8.9-3.oc9.x86_64.rpm 1.2 MB/s | 184 kB 00:00 (7/15): libnftnl-1.2.6-4.oc9.x86_64.rpm 665 kB/s | 80 kB 00:00 (8/15): python3-firewall-1.2.6-3.oc9.noarch.rpm 1.1 MB/s | 157 kB 00:00 (9/15): nftables-1.0.8-6.oc9.x86_64.rpm 2.0 MB/s | 406 kB 00:00 (10/15): python3-gobject-base-3.46.0-3.oc9.x86_64.rpm 1.2 MB/s | 191 kB 00:00 (11/15): python3-nftables-1.0.8-6.oc9.x86_64.rpm 207 kB/s | 19 kB 00:00 (12/15): python3-gobject-base-noarch-3.46.0-3.oc9.noarch.rpm 1.4 MB/s | 192 kB 00:00 (13/15): iptables-legacy-1.8.9-3.oc9.x86_64.rpm 769 kB/s | 109 kB 00:00 (14/15): iptables-legacy-libs-1.8.9-3.oc9.x86_64.rpm 285 kB/s | 28 kB 00:00 (15/15): iptables-libs-1.8.9-3.oc9.x86_64.rpm 1.6 MB/s | 325 kB 00:00 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Total 3.0 MB/s | 2.4 MB 00:00 Running transaction check Transaction check succeeded. Running transaction test Transaction test succeeded. Running transaction Preparing : 1/1 Running scriptlet: iptables-libs-1.8.9-3.oc9.x86_64 1/1 Upgrading : iptables-libs-1.8.9-3.oc9.x86_64 1/18 Installing : libnftnl-1.2.6-4.oc9.x86_64 2/18 Installing : iptables-nft-1.8.9-3.oc9.x86_64 3/18 Running scriptlet: iptables-nft-1.8.9-3.oc9.x86_64 3/18 Installing : nftables-1.0.8-6.oc9.x86_64 4/18 Running scriptlet: nftables-1.0.8-6.oc9.x86_64 4/18 Installing : python3-nftables-1.0.8-6.oc9.x86_64 5/18 Upgrading : iptables-legacy-libs-1.8.9-3.oc9.x86_64 6/18 Installing : ipset-libs-7.19-3.oc9.x86_64 7/18 Running scriptlet: ipset-libs-7.19-3.oc9.x86_64 7/18 Installing : ipset-7.19-3.oc9.x86_64 8/18 Installing : gobject-introspection-1.76.1-8.oc9.x86_64 9/18 Installing : python3-gobject-base-noarch-3.46.0-3.oc9.noarch 10/18 Installing : python3-gobject-base-3.46.0-3.oc9.x86_64 11/18 Installing : python3-firewall-1.2.6-3.oc9.noarch 12/18 Installing : firewalld-filesystem-1.2.6-3.oc9.noarch 13/18 Installing : firewalld-1.2.6-3.oc9.noarch 14/18 Running scriptlet: firewalld-1.2.6-3.oc9.noarch 14/18 Upgrading : iptables-legacy-1.8.9-3.oc9.x86_64 15/18 Running scriptlet: iptables-legacy-1.8.9-3.oc9.x86_64 15/18 Running scriptlet: iptables-legacy-1.8.9-1.oc9.x86_64 16/18 Cleanup : iptables-legacy-1.8.9-1.oc9.x86_64 16/18 Running scriptlet: iptables-legacy-1.8.9-1.oc9.x86_64 16/18 Cleanup : iptables-legacy-libs-1.8.9-1.oc9.x86_64 17/18 Cleanup : iptables-libs-1.8.9-1.oc9.x86_64 18/18 Running scriptlet: iptables-libs-1.8.9-1.oc9.x86_64 18/18 Verifying : firewalld-1.2.6-3.oc9.noarch 1/18 Verifying : firewalld-filesystem-1.2.6-3.oc9.noarch 2/18 Verifying : gobject-introspection-1.76.1-8.oc9.x86_64 3/18 Verifying : ipset-7.19-3.oc9.x86_64 4/18 Verifying : ipset-libs-7.19-3.oc9.x86_64 5/18 Verifying : iptables-nft-1.8.9-3.oc9.x86_64 6/18 Verifying : libnftnl-1.2.6-4.oc9.x86_64 7/18 Verifying : nftables-1.0.8-6.oc9.x86_64 8/18 Verifying : python3-firewall-1.2.6-3.oc9.noarch 9/18 Verifying : python3-gobject-base-3.46.0-3.oc9.x86_64 10/18 Verifying : python3-gobject-base-noarch-3.46.0-3.oc9.noarch 11/18 Verifying : python3-nftables-1.0.8-6.oc9.x86_64 12/18 Verifying : iptables-legacy-1.8.9-3.oc9.x86_64 13/18 Verifying : iptables-legacy-1.8.9-1.oc9.x86_64 14/18 Verifying : iptables-legacy-libs-1.8.9-3.oc9.x86_64 15/18 Verifying : iptables-legacy-libs-1.8.9-1.oc9.x86_64 16/18 Verifying : iptables-libs-1.8.9-3.oc9.x86_64 17/18 Verifying : iptables-libs-1.8.9-1.oc9.x86_64 18/18 Upgraded: iptables-legacy-1.8.9-3.oc9.x86_64 iptables-legacy-libs-1.8.9-3.oc9.x86_64 iptables-libs-1.8.9-3.oc9.x86_64 Installed: firewalld-1.2.6-3.oc9.noarch firewalld-filesystem-1.2.6-3.oc9.noarch gobject-introspection-1.76.1-8.oc9.x86_64 ipset-7.19-3.oc9.x86_64 ipset-libs-7.19-3.oc9.x86_64 iptables-nft-1.8.9-3.oc9.x86_64 libnftnl-1.2.6-4.oc9.x86_64 nftables-1.0.8-6.oc9.x86_64 python3-firewall-1.2.6-3.oc9.noarch python3-gobject-base-3.46.0-3.oc9.x86_64 python3-gobject-base-noarch-3.46.0-3.oc9.noarch python3-nftables-1.0.8-6.oc9.x86_64 Complete! Created symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service → /usr/lib/systemd/system/firewalld.service. Created symlink /etc/systemd/system/multi-user.target.wants/firewalld.service → /usr/lib/systemd/system/firewalld.service. success install.sh: line 1240: [: missing `]' True ================================================================== Congratulations! Installed successfully! =============注意:首次打开面板浏览器将提示不安全================= 请选择以下其中一种方式解决不安全提醒 1、下载证书,地址:https://dg2.bt.cn/ssl/baota_root.pfx,双击安装,密码【www.bt.cn】 2、点击【高级】-【继续访问】或【接受风险并继续】访问 教程:https://www.bt.cn/bbs/thread-117246-1-1.html mac用户请下载使用此证书:https://dg2.bt.cn/ssl/mac.crt ========================面板账户登录信息========================== 【云服务器】请在安全组放行 29178 端口 外网面板地址: https://101.35.44.242:29178/0244ecde 内网面板地址: https://10.0.12.17:29178/0244ecde username: fdxyfajc password: 545d3a9d 浏览器访问以下链接,添加宝塔客服 https://www.bt.cn/new/wechat_customer ================================================================== Time consumed: 2 Minute! [root@VM-12-17-opencloudos ~]#
最新发布
07-04
评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值