本文介绍如何在VMware Fusion中配置端口映射，通过编辑nat.conf文件实现主机与虚拟机之间的端口转发。具体步骤包括设置外部端口号为8022，将流量转发至虚拟机IP地址192.168.38.100的22号端口。
sudo vim /Library/Preferences/VMware Fusion/vmnet8/nat.conf
[incomingtcp]
# Use these with care - anyone can enter into your VM through these...
# The format and example are as follows:
#<external port number> = <VM's IP address>:<VM's port number>
802 = 192.168.38.100:22
配置完毕，重启vmware。
到此测试成功。
其中8022为上述配置文件绑定的端口。192.168.10.5为mac所在机器网卡ip。
[incomingtcp]
# Use these with care - anyone can enter into your VM through these...
# The format and example are as follows:
#<external port number> = <VM's IP address>:<VM's port number>
802 = 192.168.38.100:22
配置完毕，重启vmware。
到此测试成功。
其中8022为上述配置文件绑定的端口。192.168.10.5为mac所在机器网卡ip。
扫一扫
1784
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
