wince4.2模拟器

转载于 2013-07-03 17:05:20 发布 · 2.1k 阅读

wince 专栏收录该内容

6 篇文章

订阅专栏

本文详细介绍了在XP SP2环境下安装并配置Wince4.2模拟器和SDK的过程，包括下载所需软件、安装步骤、解决启动问题的方法以及注意事项。通过遵循文中指导，开发者可以顺利搭建开发环境，为Wince应用开发奠定基础。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

http://ccj.pasts.org/2009/11/wince42.html

2009-11-09

wince4.2模拟器

xpsp3下
先找MS的EVC4.0安装(类似于VC6.0)的专门开发Wince下程序的集成开发环境.然后再打包,Sp2及Sp4.
最后安装一个Wince.Net 4.2 SDK,类似于PlatformSDK.。

虽然都是微软提供的，但是不一定好找呀 ^_^
1、EVC4.0
http://download.microsoft.com/download/c/3/f/c3f8b58b-9753-4c2e-8b96-2dfe3476a2f7/eVC4.exe

2、evc4sp4.exe
http://download.microsoft.com/download/a/7/3/a735c7fb-dcbd-429f-9090-d09b3b15d3fa/evc4sp4.exe

3、Microsoft Pocket PC 2003 SDK.msi
http://download.microsoft.com/download/6/9/5/69570242-44e8-45e6-a252-9bd56db8ec83/Microsoft%20Pocket%20PC%202003%20SDK.msi

4、Chinese (Simplified) Emulation Images.msi
http://download.microsoft.com/download/2/b/4/2b4e9853-9520-4451-8501-a4f7bad6be09/Chinese%20(Simplified)%20Emulation%20Images.msi

5、MSASYNC.EXE
http://download.microsoft.com/download/5/3/5/535b9a81-4371-4a78-8aa1-733287cb406c/MSASYNC.EXE

-------------------

wince4.2模拟器起不来？
EVC4.0+sp4的默认安装的是standardsdk（即for wince5.0）+Emulator for
wince5.0。因为现在在调wince4.2，所以安装了sdk for
wince4.2（应该同时安装相同版本的模拟器），安装完毕后，在EVC中选择sdk for
wince4.2，然后编译运行，却提示Emulator for wince4.2启动不起来。
另外，安装完EVC4.0+sp4，在windows启动时，总会提示'Virtual PC/Windows CE Emulator' 的错误。
于是上网找到了解决办法，方法如下：
You install Microsoft Windows CE 4.x Emulator on a computer that is
running Microsoft Windows XP Service Pack 2 (SP2). The computer has
Data Execution Prevention (DEP) hardware. You receive the following
error message when you restart your computer:
Devices or applications disabled

'Virtual PC/Windows CE Emulator' will cause Windows to become
unstable. Windows has prevented these drivers from loading.
You may also receive the following error message when you try to start
Windows CE 4.x Emulator:
Emulator for Windows CE

One or more files from the Emulator for Windows CE installation is
missing. Please reinstall Emulator for Windows CE and try again.

To resolve this problem and to run Window CE 4.x Emulator, disable
hardware-based DEP on your computer that is running Windows XP SP2. To
do this, follow these steps:
1. Click Start, click Run, type sysdm.cpl, and then click OK.
2. In the System Properties dialog box, click the Advanced tab.
3. Under Start and Recovery, click Settings.
4. In the Startup and Recovery dialog box, click Edit.
5. Disable PAE mode by removing the /pae option if it exists.
6. Remove the /noexecute option if it exists.
7. Add the /execute option.
8. On the File menu, click Save.
9. To exit Notepad, click Exit on the File menu.
10. To close System Properties, click OK two times.
11.

Restart your computer.