在Window系统中如何让程序中访问3G虚拟地址

 除了在boot.ini文件中使用开关/3GB，还要在编译程序的时候使用/LARGEADDRESSAWARE，或者使用 Editbin.exe的工具。

 

 MSDN的文章：http://www.microsoft.com/whdc/system/platform/server/PAE/PAEmem.mspx。在这篇文章里面写的很清楚了，现贴在这里：

 

Memory Support and Windows Operating Systems

Updated: February 9, 2005

Operating systems based on Microsoft Windows NT technologies have always provided applications with a flat 32-bit virtual address space that describes 4 gigabytes (GB) of virtual memory. The address space is usually split so that 2 GB of address space is directly accessible to the application and the other 2 GB is only accessible to the Windows executive software.

The 32-bit versions of the Windows 2000 Advanced Server and Windows NT Server 4.0, Enterprise Edition, operating systems were the first versions of Windows to provide applications with a 3-GB flat virtual address space, with the kernel and executive components using only 1 GB. In response to customer requests, Microsoft has expanded the availability of this support to the 32-bit version of Windows XP Professional and all 32-bit versions of Windows Server 2003.

Windows 2000 Memory Support. With Windows 2000 Professional and Server, the maximum amount of memory that can be supported is 4 GB (identical to Windows NT 4.0, as described later in this section). However, Windows 2000 Advanced Server supports 8 GB of physical RAM and Windows 2000 Datacenter Server supports 32 GB of physical RAM using the PAE feature of the IA-32 processor family, beginning with Intel Pentium Pro and later.

Windows XP Professional and Windows Server 2003 Memory Support. The maximum amount of memory that can be supported on Windows XP Professional and Windows Server 2003 is also 4 GB. However, Windows Server 2003, Enterprise Edition supports 32 GB of physical RAM and Windows Server 2003, Datacenter Edition supports 64 GB of physical RAM using the PAE feature .

The virtual address space of processes and applications is still limited to 2 GB unless the /3GB switch is used in the Boot.ini file. When the physical RAM in the system exceeds 16 GB and the /3GB switch is used, the operating system will ignore the additional RAM until the /3GB switch is removed. This is because of the increased size of the kernel required to support more Page Table Entries. The assumption is made that the administrator would rather not lose the /3GB functionality silently and automatically; therefore, this requires the administrator to explicitly change this setting.

The /3GB switch allocates 3 GB of virtual address space to an application that uses IMAGE_FILE_LARGE_ADDRESS_AWARE in the process header. This switch allows applications to address 1 GB of additional virtual address space above 2 GB.

The virtual address space of processes and applications is still limited to 2 GB, unless the /3GB switch is used in the Boot.ini file. The following example shows how to add the /3GB parameter in the Boot.ini file to enable application memory tuning:

[boot loader]

timeout=30

default=multi(0)disk(0)rdisk(0)partition(2)/WINNT

[operating systems]

multi(0)disk(0)rdisk(0)partition(2)/WINNT="????" /3GB

Note: "????" in the previous example can be the programmatic name of any of the following operating system versions:

Windows XP Professional
Windows Server 2003
Windows Server 2003, Enterprise Edition
Windows Server 2003, Datacenter Edition
Windows 2000 Advanced Server
Windows 2000 Datacenter Server
Windows NT Server 4.0, Enterprise Edition

Windows NT 4.0 Memory Support. With Microsoft Windows NT 4.0 Workstation and Server operating systems, the maximum amount of physical memory supported is 4 GB. The maximum amount of virtual memory is 2 GB.

With Windows NT 4.0 Server, Enterprise Edition, the /3GB switch was first added to Boot.ini.

Application Memory Tuning. This capability allows memory-intensive applications to utilize up to 50 percent more virtual memory on Intel-based computers. Application memory tuning provides more of the computer's virtual memory to applications by providing less virtual memory to the operating system.

Application Changes. No APIs are required to support application memory tuning. However, it would be ineffective to automatically provide every application with a 3-GB address space.

Executables that can use the 3-GB address space are required to have the bit IMAGE_FILE_LARGE_ADDRESS_AWARE set in their image header. If you are the developer of the executable, you can specify a linker flag (/LARGEADDRESSAWARE).

To set this bit, you must use Microsoft Visual Studio Version 6.0 or later and the Editbin.exe utility, which has the ability to modify the image header (/LARGEADDRESSAWARE) flag. For more information on setting this flag, see the Microsoft Visual Studio documentation.

Some manufacturers preconfigure their applications to use application memory tuning, making it unnecessary for you to make this change. For more information, see your application documentation and contact your application vendor to determine whether they support Large Address Awareness or whether you can enable it in their application.

Physical Address Extension. PAE is an Intel-provided memory address extension that enables support of up to 64 GB of physical memory for applications running on most 32-bit (IA-32) Intel Pentium Pro and later platforms. Support for PAE is provided under Windows 2000 and 32-bit versions of Windows XP and Windows Server 2003. 64-bit versions of Windows do not support PAE.

PAE allows the most recent IA-32 processors to expand the number of bits that can be used to address physical memory from 32 bits to 36 bits through support in the host operating system for applications using the Address Windowing Extensions (AWE) application programming interface (API). More information about the AWE API can be found at the MSDN Library .