CentreCOM 9606T 交换机配置（VLAN\L3）

>

>login : manager

>friend

>create vlan=A vid=10   //创建VLAN名称、ID

>create vlan=B vid=20 

>create vlan=C vid=30

>create vlan=KL vid=40

>add vlan=10 port=1-10  //指定1-10端口到VLAN10

>.........

>add vlan=40 port=24 

>enable ip   //启用IP接口

>add ip int=vlan-A ip=192.168.10.1 mask=255.255.255.0   //VLAN-A接口配置IP与子网掩码

>add ip int=vlan-B ip=192.168.20.1 mask=255.255.255.0

>add ip int=vlan-C ip=192.168.30.1 mask=255.255.255.0

>add ip int=vlan-KL ip=192.168.1.1 mask=255.255.255.0

>add ip route=0.0.0.0  mask=0.0.0.0  int=vlan-KL NEXTHOP=192.168.1.254  //配置路由，VLAN接口、下一跳网关地址

>enable bootp relay  //启DHCP+BOOTP中继

>add bootp relay=192.168.1.254  //指定DHCP+BOOTP服务器IP

>show bootp relay

>enable ip helper    //启用UDP中继

>add ip helper destination=192.168.1.254 int=vlan-kl port=netbios  //指定UDP服务器IP

>show ip helper

•