Some useful tips about sox rec

最新推荐文章于 2021-12-13 14:59:38 发布

fky1e

最新推荐文章于 2021-12-13 14:59:38 发布

阅读量820

点赞数

分类专栏：录音 tips

tips 同时被 2 个专栏收录

31 篇文章

订阅专栏

录音

5 篇文章

订阅专栏

本文介绍了一种使用SOX软件工具包实现VOX（声控录音）的方法。作者详细分享了设置SOX命令参数的经验，包括如何通过试验找到合适的静音检测阈值，并介绍了在Raspberry Pi上配置环境变量的过程。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

I’ve spent a lot of time experimenting with SOX to do VOX and have gotten it to work reasonably well. I’ve been using Audacity to view the resultant wave form, and have settled on the following SOX command…

rec snd.wav silence 1 .5 2.85% 1 1.0 3.0% vad gain -n : newfile : restart

This will:

wait until it hears activity above the threshold for a half second, then start recording (silence 1 .5 2.85%)
stop recording when audible activity falls to zero for one second (... 1 1.0 3.0%)
trim off any initial silence up to voice detection (vad)
normalize the gain (gain -n)
store the result into a new file (snd001.wav, snd002.wav)
restart the process

Getting the “silence” numbers correct involved a lot of trial and error, and will depend on ambient noise as well as the sensitivity of your microphone. I’m using the microphone in the Logitech QuickCam IM on a Raspberry Pi through USB.

On a side note, this whole thing complains with the following…

rec FAIL formats: can’t open input `default’: snd_pcm_open error: No such file or directory

… until I created this variable in the environment:

export AUDIODEV=hw:1,0

Again - this involved a lot of experimentation with the values for “silence”, and it WILL need some tweaking for your environment.