One or more breakpoints cannot be set and have been disabled.

最新推荐文章于 2018-06-28 15:43:35 发布
最新推荐文章于 2018-06-28 15:43:35 发布
阅读量266 收藏
点赞数
CC 4.0 BY-SA版权
分类专栏： C/C++ 文章标签： vc6
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.youkuaiyun.com/specialsun/article/details/84292699

    有时在用VC6调试过程中,老遇到这个讨厌的提示"One or more breakpoints cannot be set and have been disabled",然后就跑到第一行去执行了. 

    看网上大多都是在设置中删除所有断点, 然后再重新设置新断点. 照做了一下,还是不能解决问题, 直到重新编译了程序(依赖库dll)才解决了问题. 这是因为本工程调用的dll太过了陈旧,dll对应的工程发生改变了. 导致库与代码不匹配,必然不能设置断点了

    

Armv8.9 架构扩展--原文版
baron-周贺贺-代码改变世界ctw
08-19 166
The Armv8.9 architecture extension is an extension to Armv8.8. It adds mandatory and optional architectural features. Some features must be implemented together. An implementation is Armv8.9 compliant if all of the following apply:It is Armv8.8 compliant.I
plsqldev12.0.4.1826x64主程序+ v12中文包+keygen
07-12
Support has been added for Error Breakpoints, which allow you to break execution when a specific exception (handled or unhandled) occurs: Breakpoints can now be saved and loaded. Debug object ...
One or more breakpoints cannot be set and have been disabled...
liufei_learning--脚踏实地，戒骄戒躁！
05-19 1455
<br /><br />错误现象：debug中的 step info或者run to cursor合着设置断点会出现One or morebreakpoints cannot be set and have been disabled.   Execution will stopat the beginning of the program.<br />解决方法，<br />1.在project->setting->c/c++-general->debug info->program databse
烦人的 One or more breakpoints cannot be set and have been disabled.……
热门推荐
magictong的专栏
02-06 2万+
 在VC6.0里面调试的时候，有时候会出现下面这条警告：One or more breakpoints cannot be set and have been disabled.   Execution will stop at the beginning of the program，特别是调试DLL工程的时候，经常出现，非常烦，原来红色的断点标识变成了空心圆，此时如果继续调试所有的断点都失
vc++调试时出现One or more breakpoints cannot be set ......
CXCANDIS的专栏
10-29 972
转自http://blog.sina.com.cn/s/blog_3fb753380100gzlr.html   近来调程序的时候老碰到One or more breakpoints cannot be set ......，然后不能用断点调试，郁闷不只1次了，每次都花时间上网查，效率太低了。还是把有用的方法记录一下比较好。   方法一： project->setting->c/c++-
为什么无法设置断点？提示信息：One Or More Breakpoints cannot be set and have been disabled.execution will stop at the beginning
zhengminghui的专栏
09-05 2353
现象是用 debug中的 step info或者run to cursor合着设置断点会出现One or more breakpoints cannot be set and have been disabled.   Execution will stop at the beginning of the program.解决方法，1.在project->setting->c/c++-gene
One or more breakpoints cannot be set and have been disable.Execution will stop at the begining of the programe
willsummer的盒子
04-09 835
断点调试的问题
plsqldev12.0.4.1826x32主程序+ v12中文包+keygen
07-12
Support has been added for Error Breakpoints, which allow you to break execution when a specific exception (handled or unhandled) occurs: Breakpoints can now be saved and loaded. Debug object ...
PLSQL.Developer(X64) v12.0.1.1814 主程序+ v11中文包+keygen
02-20
Support has been added for Error Breakpoints, which allow you to break execution when a specific exception (handled or unhandled) occurs: Breakpoints can now be saved and loaded. Debug object ...
PLSQL.Developer(X32) v12.0.1.1814主程序+ v11中文包+keygen
02-20
Support has been added for Error Breakpoints, which allow you to break execution when a specific exception (handled or unhandled) occurs: Breakpoints can now be saved and loaded. Debug object ...
one or more breakpoints cannot be set and have been disabled
liulina603的专栏
09-02 1203
试了网上的多种方法，都无效 我的解决方法： 1、把之前添加的东西，再重新添加一遍，加一步调试下，看能否调试   网上的那几种方法，我都试了，还是不能调试，可能出错的情况不同吧
VC++6.0 debug断点调试时出现One or more breakpoints cannot be set and have been disabled.不能调试问题。
reasco的博客
06-28 4786
    调试遇到了这个问题所以记录一下。    首先检查断点是否打在了无效行上，如果是，则点击确定就可以了，或者shift+F5,再按F5就不会出现提示了。    如果没有出现上述问题，那么可能有三种情况：第一种情况：1、project-&gt;settings中debug标签下executable for debug session中调试程序运行路径是否设置正确，为本工程的.exe文件。2、pr...
One or more breakpoints cannot be set and have been disabled
十年磨一剑，霜刃未曾试!
03-16 2716
<br />今天在写程序的时候，下了一个断点，然后调试运行，弹出这个错误<br />One or more breakpoints cannot be set and have been disabled<br /> <br />弄了半天才搞定。我的程序是Release模式的，Debug模式被不小心删了，不知道怎么加回去。<br /> <br />在Release下：<br />  将C/C++标签中的Category选择General,Optimizations选Disable (Debug),Debug
one or morebreakpoints cannot be set and have been disabled解决方案
08-13 1492
1：vc调试会出现此问题，这是360拦截的缘故 2：解决方案 当然是关闭360
One or more breakpoints cannot be set and have been disabled!Execution will stop at the beginning of the program
dazhi316的专栏
09-17 797
<br />对工程进行Rebuild All 就OK了
vc调试出现One or morebreakpoints cannot be set and have been disabled
嬴政
09-20 1556
现象是用 debug中的 step info或者run to cursor合着设置断点会出现One or morebreakpoints cannot be set and have been disabled.   Execution will stopat the beginning of the program.解决方法在网上流传的大量文章都有提到过，如何处理这个问题，有的说是改设备，有的说是 删除ncb, .opt,.plg文件最后大量测试结果表明，只要把  debug这个目录和目录下面所有文件删除
于vc调试出现One or more breakpoints cannot be set and have been disabled
fangfang的专栏
06-10 2533
<br /> <br />转自:http://blog.csdn.net/train_z/archive/2008/04/30/2347649.aspx <br /> <br />现象是用 debug中的 step info或者run to cursor合着设置断点会出现One or morebreakpoints cannot be set and have been disabled. Execution will stopat the beginning of the program.<br />解决
解决“One or more breakpoints cannot be set and have been disabled.…… ”
把梦想放飞在蓝色的天空里...
12-31 1589
文章出处：http://hi.baidu.com/ihoohi/blog/item/ca6d283988454aced5622502.html 今天，在VC6.0里面调试程序的时候，出现了下面这条警告：One or more breakpoints cannot be set and have been disabled.   Execution will stop at the beginni
AMDP Breakpoints must be set in the _A class instead、
06-03
在 SAP ABAP 程序中，如果要设置断点来调试 AMDP（ABAP Managed Database Procedures），则需要在 `_A` 类中设置断点，而不是在 `_IMPL` 类中设置。 AMDP 是一种用于在 ABAP 程序中调用数据库过程的技术。...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值