在使用cocoapods的过程中出现 Use the `$(inherited)` flag, or Remove the build settings from the target.

最新推荐文章于 2024-01-09 12:32:17 发布

Coder_Ben0723

最新推荐文章于 2024-01-09 12:32:17 发布

阅读量6.6k

点赞数

CC 4.0 BY-SA版权

本文链接：https://blog.youkuaiyun.com/shuidonglCH/article/details/50947308

在使用CocoaPods时遇到目标覆盖了 Pods 的构建设置，导致安装出现问题。解决方案是：在工程的`HEADER_SEARCH_PATHS`和`OTHER_LDFLAGS`设置中添加`$(inherited)`标志，或者删除目标中的构建设置。按照提示操作，分别针对Debug和Release模式进行调整，确保问题解决。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

最近在用pod引入新的三方库时,突然出现

!] The `UQIGOU [Debug]` target overrides the `HEADER_SEARCH_PATHS` build setting defined in `Pods/Target Support Files/Pods/Pods.debug.xcconfig'. This can lead to problems with the CocoaPods installation

- Use the `$(inherited)` flag, or

- Remove the build settings from the target.

[!] The `UQIGOU [Debug]` target overrides the `OTHER_LDFLAGS` build setting defined in `Pods/Target Support Files/Pods/Pods.debug.xcconfig'. This can lead to problems with the CocoaPods installation

- Use the `$(inherited)` flag, or

- Remove the build settings from the target.

[!] The `UQIGOU [Release]` target overrides the `HEADER_SEARCH_PATHS` build setting defined in `Pods/Target Support Files/Pods/Pods.release.xcconfig'. This can lead to problems with the CocoaPods installation

- Use the `$(inherited)` flag, or

- Remove the build settings from the target.

[!] The `UQIGOU [Release]` target overrides the `OTHER_LDFLAGS` build setting defined in `Pods/Target Support Files/Pods/Pods.release.xcconfig'. This can lead to problems with the CocoaPods installation

- Use the `$(inherited)` flag, or

- Remove the build settings from the target.

这么一大坨东西,查了下资料,发现是配置的问题,现在记录下解决方法,

进入对应的工程中,找到build setting对应的地址,这个地址就是你出现问题是弹出的内容,我这里的地址就是两个 'HEADER_SEARCH_PATHS'和 'OTHER_LDFLAGS',这两个就是上面那四个[!]里给出的,分别对应两种状态调试和发布([Debug]和[Release]),在对应的工程中把`$(inherited)`加进去即可,注意,去掉''号