1.corePoolSize 核心池大小：始终在池中的线程大小，不管线程是否空闲，除非线程被设置
2.naximumPookSize 最大线程数：允许在池中的最大线程数
3.keepAliveTime：多于核心线程池的线程，当空闲时等到keepAliveTime后终结
4.unit: keeoAliveTime 单位
5.workQueue ：task执行前用来装载线程的队列，只装载被提交的Runnable task
6.threadFactory： executor用来创建新线程的工厂。
7.RejectedExcuionHandler handle: 当线程池和队列满的时候execution被阻塞时的处理方式
/**
* Creates a new {@code ThreadPoolExecutor} with the given initial
* parameters and default thread factory and rejected execution handler.
* It may be more convenient to use one of the {@link Executors} factory
* methods instead of this general purpose constructor.
*
* @param corePoolSize the number of threads to keep in the pool, even
* if they are idle, unless {@code allowCoreThreadTimeOut} is set
* @param maximumPoolSize the maximum number of threads to allow in the
* pool
* @param keepAliveTime when the number of threads is greater than
* the core, this is the maximum time that excess idle threads
* will wait for new tasks before terminating.
* @param unit the time unit for the {@code keepAliveTime} argument
* @param workQueue the queue to use for holding tasks before they are
* executed. This queue will hold only the {@code Runnable}
* tasks submitted by the {@code execute} method.
* @throws IllegalArgumentException if one of the following holds:<br>
* {@code corePoolSize < 0}<br>
* {@code keepAliveTime < 0}<br>
* {@code maximumPoolSize <= 0}<br>
* {@code maximumPoolSize < corePoolSize}
* @throws NullPointerException if {@code workQueue} is null
*/
public ThreadPoolExecutor(int corePoolSize,
int maximumPoolSize,
long keepAliveTime,
TimeUnit unit,
BlockingQueue<Runnable> workQueue) {
this(corePoolSize, maximumPoolSize, keepAliveTime, unit, workQueue,
Executors.defaultThreadFactory(), defaultHandler);
}
/**
* Creates a new {@code ThreadPoolExecutor} with the given initial
* parameters.
*
* @param corePoolSize the number of threads to keep in the pool, even
* if they are idle, unless {@code allowCoreThreadTimeOut} is set
* @param maximumPoolSize the maximum number of threads to allow in the
* pool
* @param keepAliveTime when the number of threads is greater than
* the core, this is the maximum time that excess idle threads
* will wait for new tasks before terminating.
* @param unit the time unit for the {@code keepAliveTime} argument
* @param workQueue the queue to use for holding tasks before they are
* executed. This queue will hold only the {@code Runnable}
* tasks submitted by the {@code execute} method.
* @param threadFactory the factory to use when the executor
* creates a new thread
* @param handler the handler to use when execution is blocked
* because the thread bounds and queue capacities are reached
* @throws IllegalArgumentException if one of the following holds:<br>
* {@code corePoolSize < 0}<br>
* {@code keepAliveTime < 0}<br>
* {@code maximumPoolSize <= 0}<br>
* {@code maximumPoolSize < corePoolSize}
* @throws NullPointerException if {@code workQueue}
* or {@code threadFactory} or {@code handler} is null
*/
public ThreadPoolExecutor(int corePoolSize,
int maximumPoolSize,
long keepAliveTime,
TimeUnit unit,
BlockingQueue<Runnable> workQueue,
ThreadFactory threadFactory,
RejectedExecutionHandler handler) {
if (corePoolSize < 0 ||
maximumPoolSize <= 0 ||
maximumPoolSize < corePoolSize ||
keepAliveTime < 0)
throw new IllegalArgumentException();
if (workQueue == null || threadFactory == null || handler == null)
throw new NullPointerException();
this.corePoolSize = corePoolSize;
this.maximumPoolSize = maximumPoolSize;
this.workQueue = workQueue;
this.keepAliveTime = unit.toNanos(keepAliveTime);
this.threadFactory = threadFactory;
this.handler = handler;
}
1. FixedThreadPool
创建固定数量的线程，共享无边界的队列。当所有的线程都Active时，如果有额外的task，它们只能等到线程有空。如果由于关闭前执行时，任何一个线程终结了，一个新的将替代他执行后面的任务。线程池中的线程将一直存在。
task队列：LinkedBlockingQueue
线程工厂：Executors.defaultThreadFactory()
DefaultThreadFactory创建的线程类型均为用户线程，不能创建守护线程。
只要有用户线程尚在，JVM就不会退出。而一旦最后一个用户线程结束，即使还有守护线程运行，那么JVM也会退出。对于一些后台服务，我们更倾向于使用守护线程，比如Garbage
Collector就是一个守护线程。
DefaultThreadFactory创建的线程优先级均为NORM_PRIORITY
reject handler： defaultHandler (AbortPolicy) 终结 抛出异常
FixedThreadPool多数针对一些很稳定很固定的正规并发线程，多用于服务器
/**
* Creates a thread pool that reuses a fixed number of threads
* operating off a shared unbounded queue. At any point, at most
* {@code nThreads} threads will be active processing tasks.
* If additional tasks are submitted when all threads are active,
* they will wait in the queue until a thread is available.
* If any thread terminates due to a failure during execution
* prior to shutdown, a new one will take its place if needed to
* execute subsequent tasks. The threads in the pool will exist
* until it is explicitly {@link ExecutorService#shutdown shutdown}.
*
* @param nThreads the number of threads in the pool
* @return the newly created thread pool
* @throws IllegalArgumentException if {@code nThreads <= 0}
*/
public static ExecutorService newFixedThreadPool(int nThreads) {
return new ThreadPoolExecutor(nThreads, nThreads,
0L, TimeUnit.MILLISECONDS,
new LinkedBlockingQueue<Runnable>());
}2. SingleThread
创建一个只有一个线程的Executor， 没有边界的队列。如果线程终结了，还有任务需要执行，则会创建一个新的线程替代它。task顺序执行，在任何一个时刻只有一个task是active的。和newFixedThreadPool(1)不同，返回的Executor保证不会重构便于用额外的线程。不能使用setCorePoolSize这些方法。
/**
* Creates an Executor that uses a single worker thread operating
* off an unbounded queue. (Note however that if this single
* thread terminates due to a failure during execution prior to
* shutdown, a new one will take its place if needed to execute
* subsequent tasks.) Tasks are guaranteed to execute
* sequentially, and no more than one task will be active at any
* given time. Unlike the otherwise equivalent
* {@code newFixedThreadPool(1)} the returned executor is
* guaranteed not to be reconfigurable to use additional threads.
*
* @return the newly created single-threaded Executor
*/
public static ExecutorService newSingleThreadExecutor() {
return new FinalizableDelegatedExecutorService
(new ThreadPoolExecutor(1, 1,
0L, TimeUnit.MILLISECONDS,
new LinkedBlockingQueue<Runnable>()));
}/**
* A wrapper class that exposes only the ExecutorService methods
* of an ExecutorService implementation.
*/
static class DelegatedExecutorService extends AbstractExecutorService {
private final ExecutorService e;
DelegatedExecutorService(ExecutorService executor) { e = executor; }
public void execute(Runnable command) { e.execute(command); }
public void shutdown() { e.shutdown(); }
public List<Runnable> shutdownNow() { return e.shutdownNow(); }
public boolean isShutdown() { return e.isShutdown(); }
public boolean isTerminated() { return e.isTerminated(); }
public boolean awaitTermination(long timeout, TimeUnit unit)
throws InterruptedException {
return e.awaitTermination(timeout, unit);
}
public Future<?> submit(Runnable task) {
return e.submit(task);
}
public <T> Future<T> submit(Callable<T> task) {
return e.submit(task);
}
public <T> Future<T> submit(Runnable task, T result) {
return e.submit(task, result);
}
public <T> List<Future<T>> invokeAll(Collection<? extends Callable<T>> tasks)
throws InterruptedException {
return e.invokeAll(tasks);
}
public <T> List<Future<T>> invokeAll(Collection<? extends Callable<T>> tasks,
long timeout, TimeUnit unit)
throws InterruptedException {
return e.invokeAll(tasks, timeout, unit);
}
public <T> T invokeAny(Collection<? extends Callable<T>> tasks)
throws InterruptedException, ExecutionException {
return e.invokeAny(tasks);
}
public <T> T invokeAny(Collection<? extends Callable<T>> tasks,
long timeout, TimeUnit unit)
throws InterruptedException, ExecutionException, TimeoutException {
return e.invokeAny(tasks, timeout, unit);
}
}static class FinalizableDelegatedExecutorService
extends DelegatedExecutorService {
FinalizableDelegatedExecutorService(ExecutorService executor) {
super(executor);
}
protected void finalize() {
super.shutdown();
}
}3.CachedThread
创建一个可缓存的线程池。如果线程池的大小超过了处理任务所需要的线程，
那么就会回收部分空闲（60秒不执行任务）的线程，当任务数增加时，此线程池又可以智能的添加新线程来处理任务。此线程池不会对线程池大小做限制，线程池大小完全依赖于操作系统（或者说JVM）能够创建的最大线程大小。
task等待队列：SynchronousQueue /**
* Creates a thread pool that creates new threads as needed, but
* will reuse previously constructed threads when they are
* available. These pools will typically improve the performance
* of programs that execute many short-lived asynchronous tasks.
* Calls to {@code execute} will reuse previously constructed
* threads if available. If no existing thread is available, a new
* thread will be created and added to the pool. Threads that have
* not been used for sixty seconds are terminated and removed from
* the cache. Thus, a pool that remains idle for long enough will
* not consume any resources. Note that pools with similar
* properties but different details (for example, timeout parameters)
* may be created using {@link ThreadPoolExecutor} constructors.
*
* @return the newly created thread pool
*/
public static ExecutorService newCachedThreadPool() {
return new ThreadPoolExecutor(0, Integer.MAX_VALUE,
60L, TimeUnit.SECONDS,
new SynchronousQueue<Runnable>());
}4.ScheduledThreadPool
/**
* Creates a new {@code ScheduledThreadPoolExecutor} with the
* given core pool size.
*
* @param corePoolSize the number of threads to keep in the pool, even
* if they are idle, unless {@code allowCoreThreadTimeOut} is set
* @throws IllegalArgumentException if {@code corePoolSize < 0}
*/
public ScheduledThreadPoolExecutor(int corePoolSize) {
super(corePoolSize, Integer.MAX_VALUE, 0, NANOSECONDS,
new DelayedWorkQueue());
}
RejectedExecutionHandler四种策略：
1.AbortPolicy: 直接异常放弃。
2.CallerRunsPolicy：只要线程池没有关闭就用调用该execute的线程本身来执行。
3.DiscardPolicy:
类似AbortPolicy，但是不抛异常。
4.DiscardOldestPolicy：在pool没有关闭的前提下首先丢掉缓存在队列中的最早的任务，然后重新尝试运行该任务。这个策略需要适当小心。
设想:如果其他线程都还在运行，那么新来任务踢掉旧任务，缓存在queue中，再来一个任务又会踢掉queue中最老任务。
keepAliveTime和maximumPoolSize及BlockingQueue的类型均有关系。如果BlockingQueue是无界的，那么永远不会触发maximumPoolSize，自然keepAliveTime也就没有了意义。
反之，如果核心数较小，有界BlockingQueue数值又较小，同时keepAliveTime又设的很小，如果任务频繁，那么系统就会频繁的申请回收线程。
扫一扫
130
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
