基于51单片机的LCD1602电子密码锁设计与实现

单片机 专栏收录该内容
¥59.90 ¥99.00
130篇文章

随着科技的发展,电子密码锁越来越广泛应用于各种场合,提供了更高的安全性和便利性。本文将介绍一种基于51单片机的电子密码锁设计,并使用LCD1602显示模块实时显示相关信息。下面将详细阐述设计思路和相应的源代码。

  1. 硬件设计
    在本设计中,我们将使用51单片机作为控制核心,LCD1602显示模块用于显示相关信息。此外,还需要一个键盘模块用于输入密码,以及继电器模块用于控制锁的开关。

  2. 软件设计
    首先,我们需要引入LCD1602显示模块的驱动程序,以方便控制和显示信息。然后,我们需要定义一些常量和变量,如密码、输入缓冲区、密码输入状态等。

下面是一个简单的示例代码,展示了基于51单片机的LCD1602电子密码锁的主要功能实现:

#include <reg51.h>
#include <stdio.h>
<
(含代码)基于51单片机电子密码锁设计 基于51单片机电子密码锁设计,包含硬件说明,电路仿真,实物制作 阅读详情

相关推荐

基于51单片机与LCD1602的智能电子密码锁系统设计与实现

本文详细介绍了基于51单片机和LCD1602显示屏的智能电子密码锁系统设计与实现。系统采用AT89S52作为主控芯片,结合AT24C02存储模块实现密码的可靠存储,通过4x4矩阵键盘输入和LCD1602显示完成用户交互。文章涵盖了硬件设计、软件逻辑及常见问题解决方案,特别强调了EEPROM断电保存、三次错误锁定等安全功能,为电子爱好者提供了完整的项目实现方案。

weixin_42536058的博客 77

单片机设计 基于C语言的用24C04与1602LCD设计电子密码锁设计与实现的详细项目实例

摘要: 本项目基于51单片机(AT89C52)设计了一个电子密码锁系统,采用24C04 EEPROM存储加密密码,1602 LCD作为人机交互界面。系统通过4个矩阵按键实现6位密码输入,具有密码验证、错误次数限制、断电保护等功能。软件采用模块化设计,包含I2C通信驱动、EEPROM读写、LCD显示、按键消抖等模块。密码采用异或加密存储在EEPROM中,支持100万次擦写。1602 LCD实时显示输入状态和操作反馈。系统具有高安全性、稳定性和低成本特点,适用于家庭、办公室等门禁场景。硬件电路设计注重信号完整性

优质创作者: 人工智能技术领域 对于有一定基础的 MATLAB和Python带具体需求都可以详谈 MATLAB和Python可以提供代码调试服务加油 谢谢 你的鼓励是我前行的动力 谢谢支持 加油 谢谢 1703

基于51单片机LCD1602设计电子密码锁

基于51单片机LCD1602设计电子密码锁 1.LCD显示门锁状态以及输入密码,修改密码2.矩阵键盘输入密码,开锁,修改密码,保存密码等功能。

m0_46509684的博客 810

基于51单片机的电子密码锁设计

​ 这个设计功能比较简单,也有些地方功能不全,后面更新,欢迎交流。

wan1234512的博客 1万+

基于51单片机的电子密码锁设计与C程序实现

当程序陷入死循环或卡顿时,WDT会在超时后强制重启系统:// STC专用喂狗指令// 主循环中定期调用wdt_feed();只要程序正常运行,每隔几秒喂一次狗即可;一旦卡住,WDT就会出手救命。回顾整套系统,我们从零搭建了一个完整的51单片机密码锁方案,涵盖了:矩阵键盘扫描与去抖LCD1602驱动与时序控制密码输入、验证、设置全流程状态机模型与模式切换继电器驱动与电气隔离低功耗管理与看门狗保护联合仿真与常见问题排查。

weixin_36235398的博客 468

51单片机密码锁程序

功能键 S6---S115 数字键0-9 S16---更改密码 S17---更改密码完毕后确认 S18---重试密码、重新设定 S19---关闭密码锁 初始密码:000000 密码位数:6位 注意:掉电后,所设密码会丢失,重新上点时,密码恢复为原始的000000 与P1相连的8位发光LED点亮代表锁被打开;熄灭代表锁被锁上 程序功能: 1、开锁: 下载程序后,直接按六次S6(即代表数字0),8位LED亮,锁被打开,输入密码时, 六位数码管依次显示小横杠。 2、更改密码: 只有当开锁(LED亮)后,该功能方可使用。 首先按下更改密码键S16,然后设置相应密码,此时六位数码管会显示设置密码对应 的数字。最后设置完六位后,按下S17确认密码更改,此后新密码即生效。 3、重试密码: 当输入密码时,密码输错后按下键S18,可重新输入六位密码。 当设置密码时,设置中途想更改密码,也可按下此键重新设置。 4、关闭密码锁: 按下S19即可将打开的密码锁关闭。 推荐初级演示步骤:输入原始密码000000按6次S6密码正确后LED全部亮表示锁已打开---按下更 改密码按键S16---按S6到S15设置密码---按S17 确认密码更改---按S19关闭密码锁---输入新的密码打开密码锁

LCD1602电子密码锁程序+仿真

按键开锁,单片机,课设

tkinter使用label视频播放

tkinter是python的界面开发包 使用tkinter显示视频流的一个办法是使用label来逐帧显示图片。 from Tkinter import * from PIL import ImageTk, Image import cv2 root = Tk() # Create a frame app = Frame(root, bg="white") app.grid() # Create a label in the frame lmian = Label(app) lmain.grid(

六十英里的专栏 5529

AIGC实战:用ComfyUI和Lora微调打造专属原神角色(含完整工作流)

本文详细介绍了如何利用ComfyUI和Lora微调技术打造专属原神风格角色,涵盖从环境配置、数据集准备到工作流构建和Lora训练的全过程。通过模块化节点设计和高级控制技术,创作者可实现高度个性化的AIGC艺术创作,提升二次元角色生成的效率与质量。

weixin_29185199的博客 355

告别密码明文传输:手把手带你用Python实现SRP-6协议(附完整代码)

本文详细介绍了如何使用Python实现SRP-6协议,确保密码安全传输和存储。通过零知识证明与密钥交换技术,SRP协议在不传输明文密码的情况下完成认证,适用于金融App等高安全需求场景。文章包含完整代码示例和实战技巧,帮助开发者规避常见安全陷阱。

weixin_30689307的博客 414

Windows系统离线搭建PyTorch深度学习环境全攻略(CUDA+cudnn实战)

本文提供了一份在Windows系统下离线搭建PyTorch深度学习环境的完整实战指南。文章详细讲解了如何在没有网络连接的情况下,正确安装和配置CUDA、cudnn以及PyTorch,并构建独立的Python虚拟环境。重点强调了版本依赖关系的重要性,并提供了从驱动准备到环境验证的每一步操作,旨在帮助用户高效、稳定地部署可复用的GPU深度学习开发环境。

table的专栏 583

拆解英飞凌CoolGaN:如何用Silvaco TCAD仿真评估功率GaN HEMT的关键性能(BV、Qg、开关损耗)

本文详细解析了如何使用Silvaco TCAD仿真工具评估英飞凌CoolGaN功率GaN HEMT的关键性能指标,包括击穿电压(BV)、栅电荷(Qg)和开关损耗。通过精确建模极化效应、优化边缘终端结构以及高频开关损耗仿真技术,为功率器件工程师提供了一套完整的'设计-仿真-验证'方法论,助力GaN HEMT在快充、数据中心电源等领域的应用。

weixin_29159995的博客 430

CAN收发器TJA1145A休眠唤醒应用

TJA1145的唤醒工作原理主要依赖于其内部的唤醒机制和外部硬件的配合,主要涉及低功耗状态、选择性唤醒功能。TJA1145是一款CAN收发器,它支持多种工作模式,包括NormalStandbySleep等。在这些模式中,Sleep模式是最低功耗状态,而Normal模式则是最活跃的状态,其中Standby模式处于两者之间,允许一定的功能操作但功耗较低。TJA1145可以通过接收特定的唤醒源从Sleep或Standby模式唤醒到Standby或Normal模式。唤醒源的检测与处理。

radix关于mcu的博客,持续更新中... 5958

FR4板材实战:用ADS 2023快速设计微带线低通滤波器(附Line-Cal计算技巧)

本文详细介绍了使用ADS 2023在FR4板材上设计1-3GHz微带线低通滤波器的工程技巧。通过Line-Cal工具快速计算微带线参数,解决FR4板材的介质损耗和阻抗匹配问题,提供从集总参数转换到分布参数的实用方法,并分享版图设计与实测验证的关键要点,帮助工程师高效完成射频滤波器设计。

omega的博客 714

(十一)随机性与独立性回顾

随机性与独立性回顾

旺旺的碎冰冰~的博客 1018

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

假人有限元模型

假人模型,车辆碰撞假人有限元模型,适合做乘员安全的研究者利用

上一篇: PHY设备与网络设备的连接——单片机实现
下一篇: 全能数字时钟的设计与单片机
普通网友
博客等级 码龄3年 79粉丝 0原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值