未能找到带参数的非泛型方法

【论文精读】DisCo: Graph-Based Disentangled Contrastive Learning for Cold-Start Cross-Domain Recommendat 源域中具有相似偏好的用户在目标域中可能会表现出不同的兴趣。因此,直接迁移嵌入可能会引入不相关的源域协同信息。提出了一个基于图的解耦对比学习框架,以捕捉细粒度的用户意图并过滤掉不相关的协同信息,从而避免负迁移。 具体而言,对于每个域,我们使用多通道图编码器来捕捉多样化的用户意图。然后,我们在嵌入空间中构建亲和图,并执行多步随机游走以捕捉高阶用户相似性关系。将一个域视为目标域,我们提出了一种以用户相似性为指导的解耦意图对比学习方法,以优化跨域的用户意图桥接。 阅读详情

在数据绑定到 BlogRssBLL 上的时候,删除或者修改数据的时候会出现错误,错误信息:“未能找到带参数的非泛型方法.......” 

例如:

1、所绑定的数据源对象的参数列表如下1所示。

2、GridView EditTemplate 模板绑定的字段为<%#Bind(ResourceName)%>,如下2所示。

3、大家应注意到第一个代码块中ObjectDataSource的UpdateParameters 和 InsertParameters参数段,1、其中参数类型相同,但名字不同。2、UpdateParameters Name中的名字与GridView每个模板绑定的字段相同。故调用UpdateResource参数时,可以成功调用,但若把UpdateParamenters改成Insertparameters参数时,却出现如上的问题。所以其关键地方在于,ObjectDataSource数据源的参数要与GridView绑定字段的参数相同,这样才不会出现:“未能找到带参数的非泛型方法.....”的问题。

4、不知现在微软解决了这个问题没有。如有不对之处,请指正。

  <asp:ObjectDataSource ID="ObjectDataSource1" runat="server" DeleteMethod="DelResource"
            InsertMethod
="InsertResource" SelectMethod="GetAllResource"
            TypeName
="PV.BLL.Security.ResourceManager" UpdateMethod="UpdateResource">
            
<DeleteParameters>
                
<asp:Parameter Name="resourceID" Type="Int32" />
            
</DeleteParameters>
            
<UpdateParameters>
                
<asp:Parameter Name="ResourceID" Type="Int32" />
                
<asp:Parameter Name="ResourceName" Type="String" />
                
<asp:Parameter Name="ResourceLink" Type="String" />
                
<asp:Parameter Name="ResourceImageUrl" Type="String" />
                
<asp:Parameter Name="RoleID" Type="Int32" />
                
<asp:Parameter Name="Priority" Type="Int32" />
                
<asp:Parameter Name="Remark" Type="String" />
            
</UpdateParameters>
            
<InsertParameters>
                
<asp:Parameter Name="resourceName" Type="String" />
                
<asp:Parameter Name="resourceLink" Type="String" />
                
<asp:Parameter Name="imageUrl" Type="String" />
                
<asp:Parameter Name="roleID" Type="Int32" />
                
<asp:Parameter Name="priority" Type="Int32" />
                
<asp:Parameter Name="remark" Type="String" />
            
</InsertParameters>
        
</asp:ObjectDataSource>

 

  <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="ResourceID" DataSourceID="ObjectDataSource1" Font-Size="9pt">
            
<Columns>
            
<asp:CommandField ShowEditButton="True" EditImageUrl="~/Images/edit.gif" HeaderImageUrl="~/Images/cfgRecorder.gif"
                 ShowInsertButton
="True" InsertImageUrl="~/Images/addRecorder.gif" NewImageUrl="~/Images/addRecorder.gif"
                 UpdateImageUrl
="~/Images/updRecorder.gif" CancelImageUrl="~/Images/cancelRecorder.gif" ButtonType="Image" FooterText="添加" DeleteImageUrl="~/Images/delRecorder.gif" ShowDeleteButton="True" >
                    
<FooterStyle BackColor="Transparent" Font-Bold="True" Font-Size="9pt" ForeColor="Navy"
                        HorizontalAlign
="Center" VerticalAlign="Middle" />
                
</asp:CommandField>
                
<asp:BoundField DataField="ResourceID" HeaderText="编号" InsertVisible="False" ReadOnly="True"
                    SortExpression
="ResourceID" Visible="False" />
                
<asp:TemplateField HeaderText="资源名称" SortExpression="ResourceName">
                    
<EditItemTemplate>
                        
<asp:TextBox  ID="TextBoxEditResourceName" runat="server" Text='<%# Bind("ResourceName") %>' SkinID="Edit" Width="80px"></asp:TextBox>
                    
</EditItemTemplate>
                    
<ItemTemplate>
                        
<asp:Label ID="Label1" runat="server" Text='<%# Bind("ResourceName") %>'></asp:Label>
                    
</ItemTemplate>
                    
<HeaderStyle Width="80px" />
                    
<FooterTemplate>
                        
<asp:TextBox ID="TextBoxInsertResourceName" runat="server" SkinID="Edit" Width="80px">资源名称</asp:TextBox>
                    
</FooterTemplate>
                
</asp:TemplateField>
                
<asp:TemplateField HeaderText="资源地址" SortExpression="ResourceLink">
                    
<EditItemTemplate>
                        
<asp:TextBox ID="TextBoxResourceUrl" runat="server" Text='<%# Bind("ResourceLink") %>' SkinID="Edit" Width="180px"></asp:TextBox>
                    
</EditItemTemplate>
                    
<ItemTemplate>
                        
<asp:Label ID="Label2" runat="server" Text='<%# Bind("ResourceLink") %>'></asp:Label>
                    
</ItemTemplate>
                    
<HeaderStyle Width="180px" />
                    
<FooterTemplate>
                        
<asp:TextBox ID="TextBoxInsertResourceUrl" runat="server" SkinID="Edit" Width="180px">PEScurity/rescure.aspx</asp:TextBox>
                    
</FooterTemplate>
                
</asp:TemplateField>
                
<asp:TemplateField HeaderText="资源图片" SortExpression="ResourceImageUrl">
                    
<EditItemTemplate>
                        
<asp:TextBox ID="TextBoxResourceImage" runat="server" Text='<%# Bind("ResourceImageUrl") %>' SkinID="Edit" Width="80px"></asp:TextBox>
                    
</EditItemTemplate>
                    
<ItemTemplate>
                        
<asp:Label ID="Label3" runat="server" Text='<%# Bind("ResourceImageUrl") %>'></asp:Label>
                    
</ItemTemplate>
                    
<HeaderStyle Width="80px" />
                    
<FooterTemplate>
                        
<asp:TextBox ID="TextBoxInsertResourceImage" runat="server" SkinID="Edit" Width="80px">default.gif</asp:TextBox>
                    
</FooterTemplate>
                
</asp:TemplateField>
                
<asp:TemplateField HeaderText="所属角色" SortExpression="RoleID">
                    
<EditItemTemplate>
                        
<asp:DropDownList ID="DropDownListResourceRole" runat="server" SelectedValue='<%# Bind("RoleID") %>' DataSourceID="ObjectDataSource2"
                            DataTextField="RoleName" DataValueField="RoleID" Width="80px">
                        
</asp:DropDownList>
                    
</EditItemTemplate>
                    
<ItemTemplate>
                        
<asp:Label ID="Label4" runat="server" Text='<%# Bind("RoleID") %>'></asp:Label>
                    
</ItemTemplate>
                    
<HeaderStyle Width="80px" />
                    
<FooterTemplate>
                        
<asp:DropDownList ID="DropDownListInsertRole" runat="server" DataSourceID="ObjectDataSource2"
                            DataTextField
="RoleName" DataValueField="RoleID">
                        
</asp:DropDownList>
                    
</FooterTemplate>
                
</asp:TemplateField>
                
<asp:TemplateField HeaderText="排序" SortExpression="Priority">
                    
<EditItemTemplate>
                        
<asp:TextBox ID="TextBoxOrder" runat="server" Text='<%# Bind("Priority") %>' Width="40px" SkinID="Edit"></asp:TextBox>
                    
</EditItemTemplate>
                    
<ItemTemplate>
                        
<asp:Label ID="Label5" runat="server" Text='<%# Bind("Priority") %>'></asp:Label>
                    
</ItemTemplate>
                    
<HeaderStyle Width="40px" />
                    
<FooterTemplate>
                        
<asp:TextBox ID="TextBoxInsertOrder" runat="server" Width="40px" SkinID="Edit">1</asp:TextBox>
                    
</FooterTemplate>
                
</asp:TemplateField>
                
<asp:TemplateField HeaderText="备注" SortExpression="Remark">
                    
<EditItemTemplate>
                        
<asp:TextBox ID="TextBoxResourceRemark" runat="server" Text='<%# Bind("Remark") %>' Rows="1" TextMode="MultiLine" Width="80px" SkinID="Edit"></asp:TextBox>
                    
</EditItemTemplate>
                    
<ItemTemplate>
                        
<asp:Label ID="Label6" runat="server" Text='<%# Bind("Remark") %>'></asp:Label>
                    
</ItemTemplate>
                    
<HeaderStyle Width="80px" />
                    
<FooterTemplate>
                        
<asp:TextBox ID="TextBoxInsertRemark" runat="server" Rows="1" Text='<%# Bind("Remark") %>'
                            TextMode="MultiLine" Width="80px" SkinID="Edit">
</asp:TextBox>
                    
</FooterTemplate>
                
</asp:TemplateField>
            
</Columns>
        
</asp:GridView>

 

 

 

LangGraph教程8:LangGraph流式处理 流式处理可显著提升基于LLM应用的响应性。LangGraph支持两种流式模式:values模式返回每一步的完整结果,适合需要完整上下文处理的场景;updates模式仅返回增量变化,适用于实时更新需求。示例代码展示了如何用create_react_agent实现这两种模式,其中values模式完整记录处理流程,updates模式逐步输出结果。通过异步迭代输出流,开发者可以灵活选择适合应用场景的流式处理方式。 阅读详情

相关推荐

VS2010“未能正确加载包”问题解决方法小汇

本文按照由简至繁的顺序详述了借助网络获知的四种解法,主要面向重装 VS2010 后遭遇题述问题的网友,相关包尤指 VSTS、RadLangSvc、Language、Bootstrap 及 MicrosoftDataEntityDesign。

虚有其表的博客 1万+

ObjectDataSource控件执行Delete操作时,出现“未能找到带参数的非泛型方法”的解决方案...

使用ObjectDataSource对象执行GridView数据的删除操作时,经常会遇到“未能找到带参数的非泛型方法”的错误,后面是一个参数列表。这个问题困扰我很长时间,今天浏览Studio帮助文档时,让我解决了这个问题。多云转晴了,呵呵!1、问题陈述。首先让我们看一下出现问题的程序代码吧!这个是ASPX页面的代码 Code1<asp:GridViewID="gvwTopic...

weixin_30417487的博客 187

从建模到调参:基于Simulink的两轮差速机器人轨迹跟踪PID控制全流程解析

本文详细解析了基于Simulink的两轮差速机器人轨迹跟踪PID控制全流程。从运动学建模入手,对比了基于距离与基于位置偏差的两种控制策略,并重点阐述了高精度轨迹跟踪的控制器设计、Simulink仿真搭建及PID参数整定方法,为移动机器人运动控制提供了完整的仿真实践指南。

weixin_29169505的博客 313

未能找到带参数的非泛型方法。。。。

注意:在数据绑定到 BlogRssBLL 或 Dataset 上的时候,删除或者修改数据的时候会出现错误,错误信息:“未能找到带参数的非泛型方法。。。。”例如:查看 ObjectDataSource 下的“配置数据源。。。” 下的“定义数据方法”中的“方法签名”,例如“方法签名”中的值为“DeleteById(Int32 id),返回 Boolean”。其中“方法签名”使用了主键(例如 i

尔斌的世界 1588

【迁移学习综述】

迁移学习的目标是将某个领域或任务上学习到的知识应用到不同的但相关的领域或问题中。迁移学习的研究来源于一个观测:人类可以将以前的学到的知识应用于解决新的问题,更快的解决问题或取得更好的效果。迁移学习被赋予这样一个任务:从以前的任务当中去学习知识(knowledge)或经验,并应用于新的任务当中。换句话说,迁移学习目的是从一个或多个源任务(source tasks)中抽取知识、经验,然后应用于一个目标领域(target domain)当中去。

afadgas的博客 4319

用ChatGPT 5.5掌握SCI的4个实操润色技巧,论文质量极速提升!(附提示词)

ChatGPT 5.5的发布,在学术写作中的应用变得更加精准和安全,通过正确的使用方法,不仅可以改善语法与表达,让论文达到SCI发表水准,还能最大程度保留作者原意,将AIGC检测率控制在低风险区间。可以帮大家省下大量纠结语法、梳理逻辑的时间,在保证润色质量的同时,兼顾AIGC检测的合规要求,为论文投稿成功率提供实实在在的提升。通过智能调整语序、优化用词和句式结构,该方法能够在保留学术质感的同时,使文章表达更自然、贴近人工撰写的风格,从而避免文字过于程式化,提升论文整体可读性和表达的个性化特征。

智能AI让学术科研更容易 64

ObjectDataSource未能找到带参数的非泛型方法的解决

ObjectDataSource“”未能找到带参数的非泛型方法“DelnewsClass”: newsClassID, original_NewsClassid。 用ObjectDataSource的老报这样的错误. 在网上找了些方法但是都不太让人满意.解决不了问题. 方法1意思就是说 BLL中的参数要和sql存储过程的参数一样. 在ASP.Net中对ObjectDataSource自动配...

weixin_33919941的博客 279

第02章:HSA-Runtime架构概览

摘要: 本章深入解析HSA Runtime的三层架构设计,包括公共API层(C语言接口)、核心实现层(C++业务逻辑)和驱动抽象层(硬件交互)。重点介绍了Runtime的核心组件(Agent、Queue、Signal、Memory)及其关系,以及初始化流程、配置选项和调试功能。通过学习,读者将掌握HSA Runtime的整体架构,为后续模块学习奠定基础。

图形/计算GPU的驱动与虚拟化技术分享园地 2922

ASP.NET "未能找到带参数的非泛型方法" 的解决方法

利用ObjectDataSource作为GridView的数据源,实现分页,以及删除的功能,需要注意下面:                                                                            文章编号" Type="String"/>                      文章编号">                  

☆★星宇秋絮★☆ 2288

42、Windows Server Update Services(WSUS)全面指南

本文全面介绍了Windows Server Update Services(WSUS)的安装、配置、管理与优化策略。内容涵盖WSUS基础认知、客户端更新问题解决、多服务器架构设计、计算机分组策略、更新审批与报告查看,并深入探讨了SSL加密配置、性能优化、与其他系统(如AD和SCCM)集成以及常见故障排查方法。通过本指南,IT管理员可高效部署和管理企业级软件更新,提升安全性和运维效率。

cicd6pipeline的博客 98

Python跨年烟花(完整代码)

Python语言实现跨年烟花动画的完整代码。

AIGC 3万+

解决:未能找到带参数的非泛型方法..

 当然我们使用formview或detailsview等控件结合objectdatasource做修改添加时,经常会出现未能找到带参数的非泛型方法.. 解决方法, 1、如果是使用model做为参数,请设置DataObjectTypeName="model的完整路径(命名空间)和类名" 2、如果是使用完整字段做为参数,方法参数在页面中必需有绑定源,如果没有,可以用隐藏域或在u

yingshao419的专栏 699

【安全设备篇】HVV面试专题

还有就是这个可能是被访问的这个内网系统,本身业务系统存在业务逻辑问题,因为内网所布置的很多业务系统往往不会考虑一些安全性问题,比如在正常的业务逻辑请求中直接带了sql语句,就会触发设备规则产生告警,这一类是属于误报,然后会将此告警上报给研判人员,需要研判组专家和甲方客户确认下是否是该系统存在此业务逻辑问题,并且需要确认告警的源ip在此告警的时间段附近有没有进行操作过。天眼日志分析主要基于系统和应用程序的日志数据来识别安全威胁,而威胁感知则通过收集和分析多种来源的情报信息。理解威胁的性质和威胁背后的原理。

大河之犬的博客 7923

未能找到不带参数的非泛型方法

 http://localhost:1966/Web/Admin/OrderDetail.aspx“/Web”应用程序中的服务器错误。--------------------------------------------------------------------------------ObjectDataSource“ObjectDataSource1”未能找到不带参数的非泛型方法

aabbcczy的专栏 3203

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

Data-Structures-and-Algorithm-Analysis-in-Java.pdf

作者: Weiss, Mark A. 出版社: Addison Wesley Data Structures and Algorithm Analysis in Java is an “advanced algorithms” book that fits between traditional CS2 and Algorithms Analysis courses. In the old ACM Curriculum Guidelines, this course was known as CS7. This text is for readers who want to learn good programming and algorithm analysis skills simultaneously so that they can develop such programs with the maximum amo...

ObjectDataSource未能找到带参数的非泛型方法

ObjectDataSource未能找到带参数的非泛型方法的错误产生通常是由数据源配置更换引起的,比如方法的更换解决此问题的方法是删除此数据源,重新新建数据源配置假如只是简单的更换的话,缓存里还会调用原来的方法可能是vs的一个BUG

switch(mind) 939

LinePhone3.2.7(android端最新版本) sip客户端

SIP客户端For android:LinePhone3.2.7(最新版本),官网地址:http://www.linphone.org/

ObjectDataSource——未能找到带参数的非泛型方法

<br />今天做一个简单的网上书店 在做搜索商品页时用到了ListView分页,即将根据商品名称或描述搜索到的商品分页,我将数据集中查询某一页的sql语句定义为:<br />SELECT *<br />FROM (SELECT Id, ProductID, Name, Description, Image, Listprice, Numinstock, CategoryId, <br />              row_number() OVER (ORDER BY id) rownum<br />F

Spectacular的专栏 3835

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

ASP.NET2.0中对GridView删除操作时“未能找到带参数的非泛型方法”的解决方案

ASP.NET2.0中对GridView删除操作时“未能找到带参数的非泛型方法”的解决方案<!--google_ad_client = "pub-0496844438230311";google_ad_width = 728;google_ad_height = 90;google_ad_format = "728x90_as";google_ad_type = "te

坚定的锡兵 1363

objectdatasource 未能找到带参数的非泛型方法

先抱怨一下,刚差不多已经把这篇随笔写完了, 基本收尾的时候想到一个问题,就去vs去调试了,完了回来发现发表随便的页面没了, 相当无语啊,这次就不写那么具体了。 网上有很多方法不适合我的问题,说是gridview里有个主键字段不能设置为ReaOnly=True, 我试了下,没影响。 后来得到高手贴子的指点,建议先写高层代码,根据错误再去调试底层程序。我发现ObjectDataSo...

dazheng6764的博客 242

ObjectDataSource“ObjectDataSource1”未能找到带参数的非泛型方法

今天真是的很不幸,又出现了以前遇到的问题 上一次虽然解决了,但也没找到原因, 这是上次的问题 ( 在用objectDataSource控件进行操作时出现以下问题: ObjectDataSource“ObjectDataSource1”未能找到接受“PhotoType”类型的参数的非泛型方法“DeletePhotoType”。 说明: 执行当前 Web 请求期间,出现未处理的异常。...

weixin_34259159的博客 457

解决ObjectDataSource的"未能找到带参数的非泛型方法"异常

1.在前台增加ObjectDataSource_XXX.OldValuesParameterFormatString="{0}"; 2.调整3层架构中各个方法中的参数与数据库中字段的名字完全一样。 原因:因为ObjectDataSource是根据反射来找类的数据成员和属性的 转载于:https://www.cnblogs.com/xpxu/archive/2010/02/04...

weixin_30550271的博客 323

asp.net中ObjectDataSource“”未能找到带参数的非泛型方法“DelnewsClass”: p1, id 问题

asp.net真是让人欢喜让人忧,明明一个很智能,很nice的ObjectDataSource的listView工具,却搞个参数问题来困扰人 我用的是ObjectDataSource,然后用listView,希望智能生成一个增删改删.结果可以查出,但删除都报类似标题的错误. 查了很久,发现它问题就出在这两个文件中 数据列表1.aspx文件中的  <asp:ObjectDataSou

晨曦天下 1451

ObjectDataSource未能找到带参数的非泛型方法"DeleteArticleById":ArticleID

我在做GridView——删除功能的时候,出了这错. 解决方法: GridView的DataKeyName属性,ObjectDataSource的DeleteParameters属性,三层架构的DeleteArticleById方法的参数 这三个参数的名字一定要设成一样的,即为ArticleID。(ArticleID是Model类库中 Article这个类 的一个属性,映射到数据库的A_ID...

weixin_30672019的博客 147

ObjectDataSource未能找到带参数的非泛型方法的的解决以及自定义更新参数的探究...

传统ADO.NET的情况下使用ObjectDataSource使得我们可以使用任何数据源作为底层进行CRUD的操作,简单易行。不过ObjectDataSource用的不好往往调试起来很困难(当然这是微软控件封装了太好的缘故:-))。在常见的此类数据源控件出错中,最最常见切频繁出现的就是“XXXDataSource未能找到带参数的……”一类红色的提示。如何解决此类问题呢? 俗话说得好——工欲善其事...

weixin_30425949的博客 153
上一篇: TreeView
下一篇: ASP.NET 2.0 中 Web 事件
通者归来
博客等级 码龄25年 18粉丝 55原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值