MAVMM的安装

本文介绍如何在AMD SimNow模拟器上搭建MAVMM虚拟机管理器,并提供详细的步骤指导,包括安装SimNow、配置硬盘映像及加载MAVMM映像等关键环节。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

MAVMM的基于AMD-SVM的硬件虚拟化虚拟机管理器,但是它可以在intel平台上进行安装和使用,借助于AMD的SimNow Simulator来实现这一功能。

MAVMM的编译需要64位的Windows或者Linux的支持!

下面是MAVMM的安装说明,直接截取。在必要的地方,我再详细写一下安装中需要注意的事项和一些错误的解决方法。

这里我实验时使用的是Ubuntu 10.10 AMD64,其他系统没有测试。

MAVMM setup instruction

— Intro: MAVMM was developed and tested on AMD Simnow, which simulation a physical AMD SVM
capable machine. Even if you want to get it to work on a real physical system, I would recommend
getting it to work on Simow first, so that you start from a known working state.

Right now MAVMM can only boot up Linux, a patch for booting Windows will be soon available.

Please follow these steps to setup MAVMM:

1. Install AMD Simnow: http://developer.amd.com/cpu/simnow/Pages/default.aspx
- You may need to register your email with AMD
- AMD Simnow also requires an 64-bit host OS (either Windows or Linux)

Simnow对中文支持不好,请不要将simnow放置在中文目录下,否则不执行
2. Run AMD Simnow:
- You may need to run “sudo sysctl -w vm.max_map_count=524288″ to make Simnow happy
- Load machine configuration (.bsd) file. In Simnow, select File -> Open BSD. We use the BSD that
came with Simnow: bsds\cheetah_1p.bsd. This creates a simple single-core SVM capable machine with
256MB Ram
- Make sure you can start the machine by clicking the Run Simulation button on the toolbar. You
should see the BIOS startup and then “Operating System not found” message.

3. Build MAVMM hard disk image
- Download Linux iso images. We tested several simple Linux distros. The list below
shows the place where files should be stored (relative to MAVMM directory):

TTYLinux: need two files. For your convenience, I added them to MAVMM source repository.
ttylinux/filesys.gz
ttylinux/vmlinuz

DSL: extract all files from iso image to dsl/

Puppy: extract all files from iso image to puppy/

INSERT: extract all files from iso image to INSERT/

TinyCore: need two files
tinycore/boot/bzImage
tinycore/boot/tinycore.gz

testOS: a simple OS that does nothing but print out a string to the screen and then halt.
The source code for testOS comes with MAVMM source code, inside testos/

- Configure which guest OSes will be installed into the hard disk image: edit mkdisk.sh, set value 1
for the guest OS that you want to enable and 0 for the other ones. For example:
TTYLINUX=1
TINYCORE=1
PUPPY=0
INSERT=0
DSL=0
Note: testOS is always installed by default.

- Go to MAVMM directory and execute two command
“make all”. This will build MAVMM binaries
“./mkmamvmm.sh”. This should create a mavmm.hdd file in the same directory

make all会出现一些错误,需要逐个解决。首先应该赋予搜有mavmm文件夹下的sh可执行的权限

同时需要执行apt-get install grub libc6-dev-i386

如果出现提示没有gcc-3.4的错误,请将对应的makefile的对应项改为gcc-4.4

如果出现mkelf32权限不够的情况,请赋予其可执行权限
4. Load MAVMM hard disk image into Simnow:
- In Simnow: File -> Set Primary Master Image…, and select mavmm.hdd
- Reset / Start simulated machine. This time you will see a GRUB menu in place of “Operating System not
found” message.
If you select MAVMM, the hypervisor will be loaded and you will see a second GRUB menu. This time select
the guest OS that you want to run.

内容概要:文章基于4A架构(业务架构、应用架构、数据架构、技术架构),对SAP的成本中心和利润中心进行了详细对比分析。业务架构上,成本中心是成本控制的责任单元,负责成本归集与控制,而利润中心是利润创造的独立实体,负责收入、成本和利润的核算。应用架构方面,两者都依托于SAP的CO模块,但功能有所区分,如成本中心侧重于成本要素归集和预算管理,利润中心则关注内部交易核算和获利能力分析。数据架构中,成本中心与利润中心存在多对一的关系,交易数据通过成本归集、分摊和利润计算流程联动。技术架构依赖SAP S/4HANA的内存计算和ABAP技术,支持实时核算与跨系统集成。总结来看,成本中心和利润中心在4A架构下相互关联,共同为企业提供精细化管理和决策支持。 适合人群:从事企业财务管理、成本控制或利润核算的专业人员,以及对SAP系统有一定了解的企业信息化管理人员。 使用场景及目标:①帮助企业理解成本中心和利润中心在4A架构下的运作机制;②指导企业在实施SAP系统时合理配置成本中心和利润中心,优化业务流程;③提升企业对成本和利润的精细化管理水平,支持业务决策。 其他说明:文章不仅阐述了理论概念,还提供了具体的应用场景和技术实现方式,有助于读者全面理解并应用于实际工作中。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值