LCM屏显示黑条

LCM：
        MTK平台旋转90度，开机logo下部分显示不全。显示黑条。
 解决：
       修改vendor\mediatek\proprietary\bootable\bootloader\lk\lib\libshowlogo和vendor\mediatek\proprietary\external\libshowlogo 两个目录下的show_logo_common.c文件。

void fill_rect_with_content_by_32bit_argb8888(unsigned int *fill_addr, RECT_REGION_T rect, unsigned int *src_addr, LCM_SCREEN_T phical_screen, unsigned int bits)
{
    if (MTK_LOG_ENABLE == 1) {
        SLOGD("[show_logo_common: %s %d]\n",__FUNCTION__,__LINE__);
    }
    int virtual_width = phical_screen.needAllign == 0? phical_screen.width:phical_screen.allignWidth;
    int virtual_height = phical_screen.height;
    int i = 0;
    int j = 0;
    unsigned int * dst_addr = fill_addr;
    unsigned int * color_addr = src_addr;
    for(i = rect.top; i < rect.bottom; i++)
    {
        for(j = rect.left; j < rect.right; j++)
        {
            color_addr = (unsigned int *)src_addr;
            src_addr++;
            switch (phical_screen.rotation)
            {
                case 90:
                    dst_addr = fill_addr + (virtual_width * j  + phical_screen.width - i - 1); 
                    break;
                case 270:
                    dst_addr = fill_addr + ((virtual_width * (virtual_height - j - 1)+ i));
                    break;
                case 180:
                    // adjust fill in address
                    dst_addr = fill_addr + virtual_width * (virtual_height - i)- j-1-(virtual_width-phical_screen.width);
                    break;
                default:
                    dst_addr = fill_addr + virtual_width * i + j;
            }