wmf2eps.exe打印机设置

破解软件下载：http://ishare.iask.sina.com.cn/f/7411788.html?from=like

算是汉化吧：

1、WMF2eps打印机设置

    (a)

点击"Conversion Setup..."进入如下：

    (b)

    (c)

双击“添加打印机”

    (d)

选择文件夹下PSprint/Win2000/Standard/W2kPrint.INF

然后回到“常规”；右键“WMF2EPS Color...”,选择属性；

然后各种“确定”

2、 Converting a WMF to EPS with wmf2eps

直接OK就出现在源文件目录中

英文版转自： http://www.kellogg.northwestern.edu/rc/miktex-install.htm

wmf2eps

MikTeX cannot handle Windows Metafiles (WMF, for example, Maple images generated in Scientific WorkPlace). wmf2eps is a shareware utility ($20) to convert Windows Metafiles (WMF) into Encapsulated Postscript (EPS) files. You can perform this conversion by downloading the WMF2EPS shareware utility ($20).

1. Download WMF2EPS to a temporary directory in your hard drive.

2. expand the downloaded file ("WMF2EPS1.32.ZIP") to the directory of your choice, for example, "c:\Program Files\wmf2eps".

3. WMF2EPS requires a postscript driver. You may install the (pseudo)-printer-definition file shipped with the program, "WMF2EPS2.PPD", which uses the built in standard PostScript driver of Windows 2000. The following instructions come from the "Troubleshooting" section in the program's help files:
   1. Double-click on "Add printer" under "Settings", "Printers" in the Start menu. Add a local printer and select "FILE:" as the port. Then select "Have disk" and click on the "Browse" button to point to "c:\Program Files\wmf2eps\PSprint\Win2000\Standard\W2kPrint.INF". Windows will display the name of the selected printer (WMF2EPS Color PS L2). Click on "next". Windows will allow you to change the name of the printer and also if the printer will be the default ("No" should be selected). In the next two screens, select "Do not share this printer" and do not print a test page.

   2. "WMF2EPS Color PS L2" appears now in the list of printers. Right-click on its icon and select "Properties" from the context menu. In the "General" tab, click on the "Printing Preferences" button and then on the "Advanced" button. As shown in the graphic below, there are two options you need to change: (1) Under "Paper/Output", make sure the Paper Size is set to "Postscript Custom Page Size". (2) Under "PostScript Options" look for the "PostScript Output Option" (if you do not see anything under PostScript Options, click on the "+" next to it to expand the sub menu) and select "Encapsulated PostScript (EPS)". Click on "OK" to apply the change and close the properties dialog box.

      

4. You may add the program's path ("c:\Program Files\wmf2eps") to the user environment variables as discussed in the GhostScript installation section (#4), which enables you to call the program from any command window.

5. Since WMF2EPS does not create a group under the Start menu, you may manually add a shortcut to the program, (c:\Program Files\wmf2eps\wmf2eps.exe) to one of the existing groups.

Converting an Excel chart to EPS with wmf2eps

1. In Excel, select your chart and copy it.

2. Launch wmf2eps and select "Edit" > "Paste". You will see a window that gives you a choice between WMF or EMF. Click on "Paste WMF". WMF2EPS will prompt you to save the WMF file -- chose a location and save it. The name you give to the WMF will be the same given to the EPS version.

3. You should now see your graphic in WMF2EPS. To proceed with the conversion, either click on the "Convert Graph" icon (see mouse pointer in the screen shot below) or select "Current" from the "EPS-conversion" menu.

   

Converting a WMF to EPS with wmf2eps

1. Launch wmf2eps.

2. Under the EPS-Conversion menu, select "Conversion Setup":

   

   Under "EPS processing", click on change and select "WMF2EPS Color PS L2" from the list of printers. This setting will be stored by the program for future use.

3. Choose "Open Graphics" from the file menu to select the WMF file to be converted.

4. Once the graphic is open, select "Current" from the "EPS-Conversion" menu. wmf2eps will translate the file to EPS, saving it with the same name (with extension EPS) in the same directory where the original file is. When the conversion is done, wmf2eps produces a sound.

5. Batch conversions: If you have to convert various WMF files in a directory, "Open Graphics" in the File menu allows you to select several WMF files at a time. All the selected WMF files will be open. To convert them to EPS, select "All files" from the EPS-Conversion menu.