Ubuntu系统如何配置静态IP地址

最新推荐文章于 2025-04-14 09:59:42 发布

碧蓝幻想

最新推荐文章于 2025-04-14 09:59:42 发布

阅读量123

点赞数

分类专栏： Ubuntu 文章标签： ubuntu 服务器 linux 运维

本文链接：https://blog.youkuaiyun.com/qq_56776641/article/details/133903645

版权

Ubuntu 专栏收录该内容

6 篇文章

订阅专栏

查看网卡和IP地址

qv123@localhost:~$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:0c:29:ca:b3:ef brd ff:ff:ff:ff:ff:ff
    altname enp2s1
    inet 192.168.10.164/24 metric 100 brd 192.168.10.255 scope global dynamic ens33
       valid_lft 1732sec preferred_lft 1732sec
    inet6 fe80::20c:29ff:feca:b3ef/64 scope link 
       valid_lft forever preferred_lft forever

修改配置文件：(root用户才可以使用哦eof)

cat << eof > /etc/netplan/00-installer-config.yaml
# This is the network config written by 'subiquity'
network:
  ethernets:
    ens33:
      addresses: [192.168.10.201/24]
      routes:
        - to: default
          via: 192.168.10.2
      dhcp4: false
      nameservers:
          addresses: [8.8.8.8, 144.144.144.144]
  version: 2
  renderer: networkd
eof

生效：
```
sudo netplan apply
```