CentOS7下的网络设定方法

                       

 

CentOS7下，设定网络非常简单，如果你是ServerGUI的安装，基本上和windows一样简单的设定既可。如果是最小化安装也可以通过编辑一和设定/etc/sysconfig/network-scripts下面的文件，然后systemctl restart network既可起效。

设定文件

       

设定项目	设定详细
设定文件	/etc/sysconfig/network-scripts/ifcfg-eth0

 

ifcfg-eth0有的时候实际的名字可能类似于：ifcfg-eno16777736

设定内容实例

[root@host31 network-scripts]# cat ifcfg-eno16777736TYPE="Ethernet"BOOTPROTO="none"DEFROUTE="yes"IPV4_FAILURE_FATAL="no"IPV6INIT="yes"IPV6_AUTOCONF="yes"IPV6_DEFROUTE="yes"IPV6_FAILURE_FATAL="no"NAME="eth0"UUID="9b7e0728-7c25-46e7-b4e1-387ffeb5a66c"DEVICE="eno16777736"ONBOOT="yes"IPADDR="192.168.32.31"PREFIX="24"GATEWAY="192.169.32.2"DNS1="8.8.4.4"IPV6_PEERDNS="yes"IPV6_PEERROUTES="yes"IPV6_PRIVACY="no"[root@host31 network-scripts]#
  
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

确定network状态

 

systemctl status network

[root@host31 network-scripts]# systemctl status network● network.service - LSB: Bring up/down networking   Loaded: loaded (/etc/rc.d/init.d/network)   Active: active (exited) since Sun 2016-08-07 11:46:54 EDT; 7h ago     Docs: man:systemd-sysv-generator(8)  Process: 8862 ExecStop=/etc/rc.d/init.d/network stop (code=exited, status=0/SUCCESS)  Process: 9025 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=0/SUCCESS)Aug 07 11:46:54 host31 systemd[1]: Starting LSB: Bring up/down networking...Aug 07 11:46:54 host31 network[9025]: Bringing up loopback interface:  Could not load file '/etc/sysconfig/network-scripts/ifcfg-lo'Aug 07 11:46:54 host31 network[9025]: Could not load file '/etc/sysconfig/network-scripts/ifcfg-lo'Aug 07 11:46:54 host31 network[9025]: Could not load file '/etc/sysconfig/network-scripts/ifcfg-lo'Aug 07 11:46:54 host31 network[9025]: Could not load file '/etc/sysconfig/network-scripts/ifcfg-lo'Aug 07 11:46:54 host31 network[9025]: [  OK  ]Aug 07 11:46:54 host31 network[9025]: Bringing up interface eno16777736:  Connection successfully activated (D-Bus active path: /org/fre...ction/1)Aug 07 11:46:54 host31 network[9025]: [  OK  ]Aug 07 11:46:54 host31 systemd[1]: Started LSB: Bring up/down networking.Hint: Some lines were ellipsized, use -l to show in full.[root@host31 network-scripts]#
  
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

重新启动network服务

 

systemctl restart network

           

再分享一下我老师大神的人工智能教程吧。零基础！通俗易懂！风趣幽默！还带黄段子！希望你也加入到我们人工智能的队伍中来！https://blog.youkuaiyun.com/jiangjunshow