通过命令设置笔记本kali_linux的屏幕亮度

最新推荐文章于 2023-11-09 17:57:20 发布

wjszfq

最新推荐文章于 2023-11-09 17:57:20 发布

阅读量1.8k

点赞数

分类专栏： linux 文章标签： kali

linux 专栏收录该内容

2 篇文章

订阅专栏

本文介绍在Kali Linux系统中调整笔记本电脑屏幕亮度的方法。包括使用xrandr和xbacklight两种方式，并详细展示了如何通过命令行进行操作的具体步骤。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

通过命令设置笔记本kali_linux的屏幕亮度

参考资料: Backlight - ArchWiki
来源于:github

调整屏幕亮度第一种方法：xrandr ,优点是简单方便
缺点是:However, this is a software only modification, if your hardware has support to actually change the brightness, you will probably prefer to use xbacklight.
```
 #xrandr | grep connected | cut -f1 -d" "
 Use the output name found (in this case "eDP-1") and adjust the brightness
 #xrandr --output eDP-1 --brightness 0.7
```

调整屏幕亮度第二种方法：xbacklight，始终无法使用xbacklight -set 命令,不论怎么在/etc/X11/xorg.conf里面尝试各种内容，结果都是失败，最后放弃了用命令，而是改成了直接echo 6|tee 这种方式.

 #安装
 apt-get install xbacklight

 root@kali:~# xbacklight -set 7        
 No outputs have backlight property

 root@kali:~# readlink /sys/class/backlight/acpi_video0
 ../../devices/pci0000:00/0000:00:02.0/backlight/acpi_video0

 root@kali:~# find /sys/ -type f -iname '*brightness*'
 /sys/devices/pci0000:00/0000:00:1c.3/0000:02:00.0/leds/phy0-led/max_brightness
 /sys/devices/pci0000:00/0000:00:1c.3/0000:02:00.0/leds/phy0-led/brightness
 /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0/max_brightness
 /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0/brightness
 /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0/actual_brightness
 /sys/devices/platform/i8042/serio0/input/input0/input0::capslock/max_brightness
 /sys/devices/platform/i8042/serio0/input/input0/input0::capslock/brightness
 /sys/devices/platform/i8042/serio0/input/input0/input0::scrolllock/max_brightness
 /sys/devices/platform/i8042/serio0/input/input0/input0::scrolllock/brightness
 /sys/devices/platform/i8042/serio0/input/input0/input0::numlock/max_brightness
 /sys/devices/platform/i8042/serio0/input/input0/input0::numlock/brightness
 /sys/module/video/parameters/brightness_switch_enabled
 /sys/module/i915/parameters/invert_brightness

 #最大亮度只有９，多数笔记本最大亮度应该是１５
 root@kali:~# cat /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0/max_brightness
 9

 #当前亮度５
 cat /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0/actual_brightness
 5

 ＃设置新的亮度
 echo 7 |tee /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0/brightness