POJ 1511 Invitation Cards

本文介绍了一道关于寻找最短往返路径的算法题目,通过两次使用 Dijkstra 算法来解决从中央检查站到各公交站并返回的最小费用问题。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

Invitation Cards

Time Limit: 8000MSMemory Limit: 262144K
Total Submissions: 29752Accepted: 9928

Description

In the age of television, not many people attend theater performances. Antique Comedians of Malidinesia are aware of this fact. They want to propagate theater and, most of all, Antique Comedies. They have printed invitation cards with all the necessary information and with the programme. A lot of students were hired to distribute these invitations among the people. Each student volunteer has assigned exactly one bus stop and he or she stays there the whole day and gives invitation to people travelling by bus. A special course was taken where students learned how to influence people and what is the difference between influencing and robbery.
The transport system is very special: all lines are unidirectional and connect exactly two stops. Buses leave the originating stop with passangers each half an hour. After reaching the destination stop they return empty to the originating stop, where they wait until the next full half an hour, e.g. X:00 or X:30, where ‘X’ denotes the hour. The fee for transport between two stops is given by special tables and is payable on the spot. The lines are planned in such a way, that each round trip (i.e. a journey starting and finishing at the same stop) passes through a Central Checkpoint Stop (CCS) where each passenger has to pass a thorough check including body scan.
All the ACM student members leave the CCS each morning. Each volunteer is to move to one predetermined stop to invite passengers. There are as many volunteers as stops. At the end of the day, all students travel back to CCS. You are to write a computer program that helps ACM to minimize the amount of money to pay every day for the transport of their employees.

Input

The input consists of N cases. The first line of the input contains only positive integer N. Then follow the cases. Each case begins with a line containing exactly two integers P and Q, 1 <= P,Q <= 1000000. P is the number of stops including CCS and Q the number of bus lines. Then there are Q lines, each describing one bus line. Each of the lines contains exactly three numbers - the originating stop, the destination stop and the price. The CCS is designated by number 1. Prices are positive integers the sum of which is smaller than 1000000000. You can also assume it is always possible to get from any stop to any other stop.

Output

For each case, print one line containing the minimum amount of money to be paid each day by ACM for the travel costs of its volunteers.

Sample Input

2
2 2
1 2 13
2 1 33
4 6
1 2 10
2 1 60
1 3 20
3 4 10
2 4 5
4 1 50

Sample Output

46
210

Source

Central Europe 1998

题意

​ 给出一个有向图,n的点,m条边,问从1节点出发到2,3,…n 这些节点路程和从从这些节点回来到节点1的路程和最小值。

解题思路

​ 把图正向存一遍,跑一遍dijkstra,求出1到各个点的距离和。然后再把图反向存一遍,跑一遍dijkstra,求出1到各个点的距离和。思路很清晰。

​ 开始的时候用的dijkstra+vector+heap,结果TLE了。然后把vector换成了邻接表,结果过了。看来STL虽然方便,但是速度太慢。注意数据很大,int会炸。

#include<stdio.h>
#include<iostream>
#include<stdlib.h>
#include<queue>
using namespace std;
#define maxn 1000005
#define inf 0x3f3f3f3f

typedef struct Edgenode
{
    int x,val;
    Edgenode *next;
} Edgenode;
typedef struct Edgehead
{
    int x;
    Edgenode *firstedge;
} Edgehead,adjlist[maxn];
typedef struct graph
{
    int n,m;
    adjlist Adjlist;
} graph;
graph g;
long long d[maxn];
int flag;
struct node
{
    int x,y,val;
} nodes[maxn];

void init()
{
    for(int i=0; i<=g.n; i++)
        g.Adjlist[i].firstedge=NULL;
}
void build()
{
    int a,b,c;
    Edgenode *p;
    for(int i=0; i<g.m; i++)
    {
        if(flag)/*正向建图*/
        {
            p=(Edgenode *)malloc(sizeof(Edgenode));
            p->x=nodes[i].y;
            p->val=nodes[i].val;
            p->next=g.Adjlist[nodes[i].x].firstedge;
            g.Adjlist[nodes[i].x].firstedge=p;
        }
        else/*反向建图*/
        {
            p=(Edgenode *)malloc(sizeof(Edgenode));
            p->x=nodes[i].x;
            p->val=nodes[i].val;
            p->next=g.Adjlist[nodes[i].y].firstedge;
            g.Adjlist[nodes[i].y].firstedge=p;
        }
    }
}
struct cmp
{
    bool operator()(const int a,const int b)
    {
        return d[a]>d[b];
    }
};
long long dijkstra()
{
    priority_queue<int,vector<int>,cmp> q;
    for(int i=2; i<=g.n; i++)
        d[i]=inf;
    d[1]=0;
    q.push(1);
    while(!q.empty())
    {
        int now=q.top();
        q.pop();
        Edgenode *p=g.Adjlist[now].firstedge;
        while(p)
        {
            if(d[p->x]>d[now]+p->val)
            {
                d[p->x]=d[now]+p->val;
                q.push(p->x);
            }
            p=p->next;
        }
    }
    long long ans=0;
    for(int i=2; i<=g.n; i++)
        ans+=d[i];
    return ans;
}
int main()
{
    //freopen("in.txt","r",stdin);
    int t;
    cin>>t;
    while(t--)
    {
        scanf("%d%d",&g.n,&g.m);
        for(int i=0; i<g.m; i++)
            scanf("%d%d%d",&nodes[i].x,&nodes[i].y,&nodes[i].val);
        long long ans=0;
        flag=1;
        init();
        build();
        ans+=dijkstra();
        flag=0;
        init();
        build();
        ans+=dijkstra();
        printf("%lld\n",ans);
    }
    return 0;
}

CH341A编程器是一款广泛应用的通用编程设备,尤其在电子工程和嵌入式系统开发领域中,它被用来烧录各种类型的微控制器、存储器和其他IC芯片。这款编程器的最新版本为1.3,它的一个显著特点是增加了对25Q256等32M芯片的支持。 25Q256是一种串行EEPROM(电可擦可编程只读存储器)芯片,通常用于存储程序代码、配置数据或其他非易失性信息。32M在这里指的是存储容量,即该芯片可以存储32兆位(Mbit)的数据,换算成字节数就是4MB。这种大容量的存储器在许多嵌入式系统中都有应用,例如汽车电子、工业控制、消费电子设备等。 CH341A编程器的1.3版更新,意味着它可以与更多的芯片型号兼容,特别是针对32M容量的芯片进行了优化,提高了编程效率和稳定性。26系列芯片通常指的是Microchip公司的25系列SPI(串行外围接口)EEPROM产品线,这些芯片广泛应用于各种需要小体积、低功耗和非易失性存储的应用场景。 全功能版的CH341A编程器不仅支持25Q256,还支持其他大容量芯片,这意味着它具有广泛的兼容性,能够满足不同项目的需求。这包括但不限于微控制器、EPROM、EEPROM、闪存、逻辑门电路等多种类型芯片的编程。 使用CH341A编程器进行编程操作时,首先需要将设备通过USB连接到计算机,然后安装相应的驱动程序和编程软件。在本例中,压缩包中的"CH341A_1.30"很可能是编程软件的安装程序。安装后,用户可以通过软件界面选择需要编程的芯片类型,加载待烧录的固件或数据,然后执行编程操作。编程过程中需要注意的是,确保正确设置芯片的电压、时钟频率等参数,以防止损坏芯片。 CH341A编程器1.3版是面向电子爱好者和专业工程师的一款实用工具,其强大的兼容性和易用性使其在众多编程器中脱颖而出。对于需要处理25Q256等32M芯片的项目,或者26系列芯片的编程工作,CH341A编程器是理想的选择。通过持续的软件更新和升级,它保持了与现代电子技术同步,确保用户能方便地对各种芯片进行编程和调试。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值