Termux小白必看:不用root安卓手机也能玩转sudo命令(附FakeRoot详细配置)

2023最新实测!用FakeRoot给Termux提权的3个隐藏坑点及解决方案 本文针对2023年最新实践,详细解析了在Termux中使用FakeRoot技术模拟root权限的进阶方法。文章重点揭示了三个常见隐藏坑点:网络与DNS配置、存储空间与权限管理、老旧安卓版本兼容性问题,并提供了基于proot-distro等工具的现代解决方案,帮助用户在无需真实root的安卓设备上安全构建高权限Linux沙盒环境。 阅读详情

Termux小白必看:不用root安卓手机也能玩转sudo命令(附FakeRoot详细配置)

每次看到别人在Termux里潇洒地敲下sudo apt install,或者轻松修改系统级文件时,你是不是也心痒痒?但一想到要给手机解锁、刷机、Root,风险高不说,还可能失去保修,瞬间就打了退堂鼓。别急,今天要聊的,就是为所有不想、不敢、不能Root手机的安卓用户准备的“曲线救国”方案。我们完全可以在一个受控的、安全的沙盒环境里,模拟出Root权限,实现绝大多数需要sudo才能完成的操作。这听起来有点“魔法”,但背后的原理并不复杂,而且配置过程远比想象中简单。无论你是想学习Linux命令的爱好者,还是需要在移动端进行轻量级开发的程序员,这篇文章都将带你绕过系统限制,在Termux里开辟一片拥有“管理员权限”的新天地。

1. 理解核心:为什么非Root设备也能“拥有”Root?

在深入动手之前,我们有必要先搞清楚,我们到底在做什么。安卓系统基于Linux内核,其权限管理非常严格。真正的Root意味着获取内核级别的最高权限,可以修改系统分区、访问所有硬件资源。这无疑伴随着巨大的安全风险。

而我们今天要实现的,是一种巧妙的“欺骗”或“模拟”。它不触及手机真实的系统分区,而是在Termux为我们创建的独立用户空间(通常是一个目录)内,构建一个虚拟的根文件系统(/)。在这个虚拟环境里,我们可以“自封为王”,将自己设定为root用户,拥有对这个虚拟文件系统的完全控制权。这就像在你的房子里,单独划出一个房间,在这个房间里,你可以随意装修、布置,规则由你定,但不会影响到房子主体结构和其他房间。

实现这种模拟的主流工具是 PRoot 和基于它的一些封装脚本(如FakeRoot)。它们的工作原理可以概括为:

  • 用户空间模拟:通过ptrace等系统调用,拦截并重定向应用程序发出的系统调用(如文件访问、进程管理)。
  • 路径重绑定:将应用程序试图访问的真实系统路径(如/system),映射到我们虚拟环境内的某个子目录下。
  • 权限伪装:在虚拟环境内,将当前用户的UID(用户ID)和GID(组ID)报告为0(即root的ID),从而让运行在其中的程序“相信”自己拥有最高权限。

注意:这种模拟的Root权限是有边界的。你无法用它来修改手机真实的/system分区,无法刷写Recovery,也无法绕过那些依赖于内核级验证的安全机制(如某些银行App的检测)。它的主要舞台,仅限于Termux自身的环境以及你明确绑定的目录。

为了更清晰地理解其能力边界,可以参考下面的对比:

特性 真正的系统Root (如Magisk) Termux下的模拟Root (如PRoot/FakeRoot)
权限级别 内核级,系统全局 用户空间级,环境局部
影响范围
Termux安装完整版Linux(Ubuntu)详细步骤 阅读详情

相关推荐

termux-sudo, 为Termux提供sudo的bash脚本.zip

termux-sudo, 为Termux提供sudo的bash脚本 termux为Termux提供sudo的bash脚本Termux是面向Android的终端 模拟器 和Linux环境需求带su二进制的根SUDO无法在没有ldap的情况下工作安装英镑下载sudo到电话并提取打开 Term

termux:安装sudo

白蚁须藤 一个为Termux提供sudo的bash脚本Termux是适用于Android的终端仿真器和Linux环境 笔记 termux-sudo最初托管在GitHub上。 由于Microsoft正在购买GitHub,因此我决定将其移至此处。 要求 带有Su二进制的植根电话SU不能在没有SU的情况下工作 安装sudo 克隆termux-sudo或下载到电话并解压缩 开放Termux 安装sudo所需的依赖项: pkg install ncurses-utils 更改为克隆或提取目录 执行以下命令以将sudo放入具有正确权限和所有权的正确目录中 cat sudo > /data/data/com.termux/files/usr/bin/sudo chmod 700 /data/data/com.termux/files/usr/bin/sudo 特征 首次运行时自动设置其环境,除了

Termux-Sudo:惰性脚本,用于在Termux中安装Sudo

Termux-Sudo Sudo的懒惰怪胎脚本 #安装.. apt安装git git clone 光盘Termux-Sudo chmod + x sudo.sh bash sudo.sh

termux-sudo逗号

白蚁须藤 一个为Termux提供sudo的bash脚本Termux是适用于Android的终端仿真器和Linux环境 笔记 termux-sudo最初托管在GitHub上。 由于Microsoft正在购买GitHub,因此我决定将其移至此处。 要求 带有Su二进制的植根电话SU不能在没有SU的情况下工作 安装sudo 克隆termux-sudo或下载到手机并提取 开放终端 安装sudo所需的依赖项: pkg install ncurses-utils 更改为克隆或提取目录 执行以下命令以将sudo放入具有正确权限和所有权的正确目录中 cat sudo > /data/data/com.termux/files/usr/bin/sudo chmod 700 /data/data/com.termux/files/usr/bin/sudo 特征 首次运行时自动设置其环境,无需任何操作即可

CPI01 CIMPC下账异常报告.pptx

CPI01 CIMPC下账异常报告.pptx

SAP IDOC实战:如何用EDI实现跨公司采购订单自动生成销售订单(附完整配置步骤)

本文详细解析了如何利用SAP IDOC与EDI技术,实现跨公司采购订单自动生成销售订单的完整流程。通过实战案例,从业务蓝图设计、输出条件配置、伙伴参数设定到IDOC消息类型处理,提供了清晰的配置步骤与故障排查指南,帮助企业打通内部业务流,构建高效的自动化闭环。

weixin_29215815的博客 731

保姆级教程:用AI辅助反编译Python3.9+的EXE文件(兼容新版pycdc工具)

本文详细介绍了如何利用AI技术辅助反编译Python 3.9+的EXE文件,解决传统工具如uncompyle6无法处理新版字节码的问题。通过pycdc工具和AI大模型的结合,开发者可以高效还原代码逻辑,并提供了从EXE解包到字节码解析的完整流程,适用于逆向工程和代码分析场景。

hill8的博客 1227

Aloudata 荣登“数智技术系列榜单”和“数据智能服务商 TOP30”

持续助力各行业数智化先进企业突破数据管理技术瓶颈,以更加敏捷、精准和可靠的数据交付驱动企业业务创新与经营提效

Aloudata的博客 672

uniapp [全端兼容] - 实现省市区选择器三四级联动组件,uniapp选择地址自定义省市区三级联动插件,弹框式多级联动选择器区域选择(全平台兼容苹果安卓App、支付宝微信小程序、移动端H5网页)

uni-app省市区选择器,省市区街道三级四级联动选择器,uniapp自定义多列选择器省市两级联动,uniapp picker组件实现多级联动,h5移动端网页,微信小程序,支付宝小程序,Android安卓,苹果ios,app,nvue,uniApp选择器省市区县街道乡镇,uniapp实现省市区选择联动,uniapp城市三级联动(自定义组件)_uniapp三级联动,picker插件省市区联动,uniapp小程序省市区选择器,uni-app 省市区街道的四级联动选择,uniapp怎样实现省市区地址三级联动uni

🏆 前端领域优质创作者 1万+

OKX 欧易 交易机器人开发基础

接口文档: https://www.okx.com/docs-v5/zh/#overview REST API 常用请求 查看账户余额 结果数据格式: 获取限价 结果格式: 获取指数行情 数据结构: 下单 结果数据: 获取未成交订单列表 返回结果: 撤单 结果结构:

Willin Wang 的全栈升级指南 2万+

LVGL(lv_table)

LVGL中的lv_table是一个轻量级表格控件,用于显示行列式文本数据。它支持设置单元格内容/样式、行列调整、事件响应等基础功能,适用于参数配置、数据展示等场景。通过API可快速创建表格,设置行列数、填充数据,并自定义对齐方式与样式。但需注意默认无滚动条、行数限制等问题。该控件适合简单表格需求,复杂交互需结合自定义事件处理。

m0_49476241的博客 1268

OpenMM | PDBFixer 用于蛋白质预处理

PDBFixer 用于蛋白质预处理

DrugOne 3007

超详细的Burp Suite安装使用

‌Burp Suite是一个强大的Web应用安全测试工具,适用于网络安全专业人士进行自动化网络应用程序的安全测试。‌ 它提供了在Windows和Kali Linux上安装和激活Burp Suite Professional的简便步骤,帮助用户快速集成并启用强大的网络扫描和渗透测试功能。Burp Suite的特点包括易于安装、良好的兼容性、内置的自动化工具、优秀的用户体验以及详细的教程,使得无论是安全领域的新手还是经验丰富的专家,都能轻松上手并高效地进行安全测试。此外,Burp Suite还支持扩展功能的使用

Dreams°的博客 2649

霍尼韦尔SoftMaster使用说明

霍尼韦尔SoftMaster使用说明

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

Outlook Express 6 (OE6) for Win7/Win8/Win10

英文版 Outlook Express6.0, 兼容Win7/Win10/WinXP,解压就可用。

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

上一篇: SPI NOR Flash独立块保护 vs BP保护:嵌入式系统防掉电误写的终极方案对比
下一篇: EXIF数据隐藏的秘密:如何用Python批量提取照片拍摄信息(含GPS定位解析)
Python
博客等级 码龄26年 1973粉丝 1567原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值