墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
1.2w累计阅读
1.3w+平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
注意：我们最好下载32位的客户端，因为这样可以搭配PLDeveloperSQL（只有32位）使用，Oracle客户端的位数和Oracle服务器的位数没有关系，即64位的Oracle服务器可以搭配使用64bit和32 bit的客户端。
下载地址：
http://download.oracle.com/otn/nt/oracle11g/112010/win32_11gR2_client.zip
先将下载下来的ZIP文件解压，并运行setup.exe文件。
注意此处安装类型选择：”管理员”
执行到第四步之后，出现错误，直接点全部忽略就可以了。
【数据库】oracle安装步骤（详细）
全局数据库名可以默认，且口令密码，必须要牢记。密码输入时， 有提示警告，不符合Oracel建议时不用管。(因Oracel建议的密码规则比较麻烦， 必须是大写字母加小写字母加数字，而且必须是8位以上。使用windows10等系统安装oracle 11g等版本的数据库时，经常会发现开始安装时弹出【INS-13001 环境不满足最低要求】的提示，此时可以点击【是】继续安装。也可以点击【否】结束安装，然后找到文件【cvu_prereq.xml】，修改其内容将不会弹出这个提示了。我这里直接选择【是】了。
【实战解析】RTL8306MB交换芯片驱动开发中的RMII接口调试陷阱
本文深入剖析了RTL8306MB交换芯片驱动开发中RMII接口的典型调试陷阱。通过一个工业网关项目的实战案例，揭示了因硬件原理图设计疏忽导致TX_EN与CRS_DV信号线错接，从而引发网络“哑火”的根本原因。文章详细展示了使用示波器从时钟、数据到控制信号的系统性排查方法，并总结了关键的设计警示与自查清单，为嵌入式网络开发中的软硬件协同调试提供了宝贵经验。
保姆级教程：用SSH手动重建黑群晖RAID1阵列，修复‘存储空间损毁’
本文提供了一份详细的SSH手动重建黑群晖RAID1阵列的教程，帮助用户修复‘存储空间损毁’问题。通过深入解析mdadm软RAID的底层逻辑，从诊断到重建的全过程，确保用户能够掌握黑群晖存储池的修复技术。适用于技术爱好者和系统管理员。
Matlab中eig内置函数转为C语言
本文记录一下如何将MATLAB中的eig函数转为C语言，即通过C语言求解矩阵的特征值与特征向量。[V,D]=eig(Rx)中V为矩阵Rx的特征向量，D为矩阵的特征值。其中Rx维度为12*12的复矩阵。 首先在MATLAB端创建入口函数保存为eigvalue.m： 打开MATLAB Coder，添加入口函数： 3.在定义输入类型窗口中，需要添加输入数据来训练...
GPL vs MIT：独立开发者选择开源协议的法律与商业考量
你可能听过这样的故事：某个开发者用业余时间写了个超好用的工具库，开源后被某大厂悄悄集成到闭源产品里赚得盆满钵满，开发者却连杯奶茶钱都没拿到；也可能听说过另一个案例：开发者选了GPL协议，结果用户修改代码后必须开源，反而推动项目社区快速壮大，最终靠技术服务赚到了钱。这些故事的核心矛盾，都源于开源协议的选择。对于独立开发者（尤其是单枪匹马写代码的个人或小团队），开源协议不是“随便选一个就行”的小事——它是代码的“使用说明书”，更是保护自身权益、规划项目未来的关键工具。
树莓派4B：控制步进电机
文章目录准备阶段接线阶段树莓派程序 准备阶段 准备以下物品，淘宝都可以买到: 57步进电机 电源开关（220v转24v，3A，72W） 步进电机驱动器 电源线 电线 杜邦线 树莓派4B一套 具体型号如下： 接线阶段 整体：接线效果如下图 电源开关起220v转24v作用，很好接线，输出24v接入步进电机驱动器 步进电机驱动器的 A+ A- B+ B- 按提示接步进电机四线，步进电机上就会有说...
STM32H7B0VBT6使用Free RTOS配置SD卡+Fatfs文件管理系统
STM32H7B0VBT6使用Free RTOS配置SD卡+Fatfs文件管理系统，记录配置过程
YOLO11改进大全：卷积层、轻量化、注意力机制、损失函数、Backbone、SPPF、Neck、检测头全方位优化汇总
YOLOv11改进大全：卷积层、轻量化、注意力机制、损失函数、Backbone、SPPF、Neck、检测头全方位优化汇总
7、初级视觉皮层（V1）的研究综述
本文综述了初级视觉皮层（V1）的基本功能特性、计算理解、细胞相互作用及理论模型。V1不仅执行方向和空间频率的选择性滤波，还通过相位选择性和上下文调制参与高级视觉处理。研究从信息编码角度解释了V1感受野的形成，并介绍了基于自然图像统计的建模方法。横向与反馈连接揭示了V1在全局视觉整合中的作用，尤其是上下文对细胞响应的快速调节。李的动态模型提出V1可生成视觉显著性图，支持前注意分割和注意力引导。未来研究聚焦于V1在注意力、意识和硬件实现中的潜在应用，推动视觉神经科学与人工智能的交叉发展。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
VB摄像头监控
该VB模块可对摄像头捕获的画面进行录像等，可在创建的窗口进行控制
Devexpress16.2.6破解工具
Devexpress16.2.6破解工具Devexpress16.2.6破解工具Devexpress16.2.6破解工具Devexpress16.2.6破解工具
蓝牙模块HM-10手册
蓝牙模块HM-10手册，该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
2万+
扫一扫
