MATH6166/MATH6173 – Coursework 1

《算法设计与分析》全套PPT课件(哈尔滨工程大学) 立即下载

Java Python MATH6166/MATH6173 – Coursework 1

Instructions for Coursework

1.  This coursework assignment is worth 80% of the overall mark for the module MATH6166, and 40% of the overall mark for the module MATH6173.

2.  The deadline is 15:00 on Thursday 21st November 2024, and your completed work must be submitted electronically via Blackboard.

3.  All  of your  answers  to  the  coursework  are  to  be  written  in  the  R  Markdown  file  “Coursework- template.Rmd”, which can be found under the Coursework heading in the Assessment panel on Black- board. Download this file and write all of your answers to the coursework questions in this file only.

4.  The file “Coursework-template.Rmd” is a template answer sheet that is used to write your answers to all of the coursework questions. This is the only file that you need to use to write down your answers. You must not delete any of the content from this file; for example, do not change the names or options of code chunks, or change the layout of the file.  The layout of the file has been designed specifically so that the correctness of the R functions that you write can be systematically assessed.

5. You must write all of your coding answers to each question in the corresponding empty R Markdown code chunk within the file.  Do not create any new code chunks.  Each code chunk has a name that matches the corresponding coursework question, and there are comments that signpost where to provide an answer for a specific question.  For example, for  Question 1 (a), you will see the comment Write your  code  for  Q1  (a)  in  the  code  chunk  below:  and below this comment will be a code chunk with the label Q1a. Any changes you make outside of the designated code chunks will likely result in your assessment not being able to be marked. All the coding answers must be carried out through R commands (do not use comments to give your answers).

6. Where relevant,  report  your  answers in the designated section below the R code chunks for each question in the R Markdown file.  For example, for Question 1 (a), you will see the comment Report your  answer  for  Q1  (a)  below:, below which you can write your answer in standard R Markdown formatting.

7. When writing an R function, the

•  function name,

•  argument names and data type, and

• output names and data type

must be exactly the same as those specified in the questions; otherwise a heavy penalty will be applied. Please note that uppercase and lowercase of the same alphabet are not the same character, so if the question asks to write a function/argument called, apple, but a function/argument called applE is presented in your answer, then that would be wrong.

8. Your submission must consist of exactly two files; the R Markdown file and its associated html file that is created by knitting/rendering the R Markdown file. The R Markdown file is the “Coursework- template.Rmd” file with your answers added in the appropriate places.   Using  this  file, you must generate a html output file using the knit functionality in R Markdown, and submit this along with the R Markdown file.

9. Your R Markdown file must be renamed, and have the file name .Rmd. For example, if your student ID is 12345678, then your script. must have the file name 12345678.Rmd.

10.  Similarly, the associated html file should be named .html.  For example, if your student ID is 12345678, then your html file must have the file name 12345678.html.  (This should be correctly named by default provided that you have named the R Markdown file correctly.)

11.  Missing  R code will be penalised.   Please  ensure  the  submitted  files  have  the  correct  file  format; otherwise it cannot be marked. Note that an R Markdown file is a different format to an R script. file.

12. Your entire R Markdown file must be reproducible and run without any errors.

13. You must informatively comment your R code where appropriate.

14.  Unless specifically stated otherwise, you do not have to include error handling in your code.

15.  Ensure  that  all  required  plots  are  informative,   including  the  use  of  appropriate  plotting  areas, points/lines sizes and colours, as well as including meaningful labels, titles and legends.

16.  Except for ggplot2, you must not load any add-on packages, i.e., using functions library or require etc.

17.  All data files required to complete the Coursework can be downloaded from Blackboard, under the Coursework panel.

18.  To help you with the completion of the Coursework, there is an example Coursework question and related files on Blackboard for reference. You can find the following files under the Coursework Example Question panel:

•  An example Coursework question, in the file Coursework-example.pdf,

•  A template R Markdown file Coursework-example-template .Rmd in which to write your answers to the example Coursework question,

•  A model solution R Markdown file Coursework-example-solutions.Rmd, which contains solu- tions to the Coursework example question and shows you the way you are expected to fill in the Coursework-example-template .Rmd file with your answers.

•  The model solution output html file Coursework-example-solutions.html, which is simply the rendered output of the Coursework-example-solutions .Rmd file.

•  all-ad-sales .txt and youtube-ad-sales .txt: the data files needed for the example question.

19. When asked to import a data file into your R workspace, you should first set the working directory to the location of the file on your local computer using the command setwd, and then read the file in using the appropriate R command  (e.g. read .csv or read.table).  You should set the working directory every time you have to import a data file. For an example of how to do this, see Question 1 (a) in the example Coursework solutions file.

20.  The  standard  Faculty rules on  late  submissions  apply:   for  every  day,  or  part  of a  day,  that  the coursework is late, the mark will be reduced by a factor of 10%.  No credit will be given for work which is more than five days late.

21.  All  coursework  must  be  carried  out independently,  without  collaborating  with  other  students. You  are  reminded  of  the  University’s  Academic  Responsibility  and   Conduct  Policy,   see https: //www.southampton.ac.uk/about/governance/regulations-policies/student-regulations/academic-responsibility-conduct.

22. In the interests of fairness,  queries which relate directly to the coursework must be made via the Coursework Discussion Forum on Blackboard.  This ensures that everybody has access to the same information.

Total marks available:  80

Question 1: Exploratory analysis of Melbourne house price data set

[21 marks]

The data set in the file melbourne_house_price .csv contains information on properties sold in Melbourne, Australia in 2016 and 2017. The data consists of the following seven columns:

1.  Suburb: a character variable, giving the name of the Melbourne suburb the property is in.

2. Address: a character variable, giving the street address of the property.

3. Rooms: a numeric variable, giving the number of bedrooms in the property.

4. Type:  a character variable, giving the type of the property.   This  can be either  "h"  (house),  "t" (townhouse), or "u" (unit or duplex).

5. Price: a numeric variable, giving the price that the property was sold for (in AU$).

6. BuildingArea: a numeric variable, giving the area (in m2 ) of the property.

7. YearBuilt: a numeric variable, giving the year the property was built.

Not all of the entries in the melbourne_house_price .csv data set file have been observed.  Some values in the BuildingArea and YearBuilt columns are missing, and these are represented by the value NA. For example, in the YearBuilt column, the 3rd entry has been observed, and has value 2008. However, the 1st and 2nd entries are missing, and have value NA.

(a)  [2 marks] Import the data set from the melbourne_house_prices .csv file into the R workspace in a variable named house_data. How many properties in the data set have more than 4 bedrooms?  Store this in a variable named more4_rooms.

(b)  [2  marks]  Convert the  Suburb,  Rooms, and Type columns into factor variables.   How many unique

categories are there for the Suburb variable? Store the number in a variable named num_suburbs.

(c)  [2 marks] Calculate the median building area for properties built in the year 1980 or before.  Make sure to remove any missing data (from both variables) from your calculations.  Store it in a variable named median_area.

(d)  [2 marks] What is the address of the most expensive townhouse sold in the Brunswick suburb?  Store this in a variable named brunswick_t_max_address.

(e)  [3 marks] Create a new column, named FullyObserved, that contains the value TRUE if all observations in a single row have been observed, and FALSE otherwise.  What is the name of the column with the most missing values? Store it in a variable named col_miss.

(f)  [3 marks]  Create a side-by-side box plot of Price for the three Suburb values  "Bentleigh  East", "Preston", and "Reservoir".

(g)  [3 marks] On a single figure, plot two histograms of the BuildingArea variable on the probability scale, with one histogram for properties with 1 bedroom, and the other for properties with 4 bedrooms, using x-axis limits of 0 and 300.

Hint: you can add one histogram plot to another by supplying the argument add  =  TRUE to the hist() function.

(h)  [4  marks] For the columns containing numeric variables, one approach to dealing with NA values is to replace the NA values with the mean value of the observed variables in the column according to some rule.

Replace NA values in the BuildingArea variable with the mean value of the BuildingArea values that have the same number of Rooms variable. If all data for a given number of bedrooms is missing, then use the mean of all of the BuildingArea values instead.  For example, observation  1 has an NA value in the BuildingArea column, and 2 in the Rooms column, so the NA value should be replaced by the mean BuildingArea of all 2 bedroom pr MATH6166/MATH6173 – Coursework 1 operties.

Question 2:  Classifying data using k-nearest neighbours

[27 marks]

Scientists use measurements collected from radar signals in order to detect objects in the Earth’s ionosphere (a region of the Earth’s atmosphere stretching from a height of about 50km to more than 1000km).  The scientists record data consisting of the radar measurements from a signal sent to a specific target location in the Earth’s ionosphere.

Given new radar readings from a target location in the ionosphere, the scientists are interested in classifying whether or not the radar measurements give evidence of an object being present at that location.  Each data observation therefore comes from one of two classes, 1 or 2, with 1 representing an object being present, and 2 representing no object being present. The scientists aim to predict, given a new observation of radar measurements, if the observation should be classified as coming from class 1 (object detected) or class 2 (no object detected).

Mathematically, suppose we observe p-dimensional data that comes from one of two classes, 1 or 2.  The scientists have access to a training data set of n pairs of data points (x1 , y1 ), (x2 , y2 ), . . . , (xn , yn ), where for each 1 ≤ i ≤ n, xi  ∈ Rp  and yi   ∈ {1, 2}.  The value yi  is the class label of xi , so that in the training data set, the class membership of each observation is known.

The  k-nearest  neighbours  algorithm  can  be  used  to  predict  which  class  a  new  observation x be- longs  to.     For  a  given  distance  function   f (·, ·)   :   Rp   × Rp    →   [0, ∞ ),   we  order  the  data  points  as

(x(1) , y(1) ), (x(2) , y(2) ), . . . , (x(n), y(n)) according to the distance of the point to x with respect to f , so that

f (x(1), x) ≤ f (x(2), x) ≤ · · · ≤ f (x(n), x).                                                 (1)

Then, the predicted class of x, , is given by the majority class of the k-nearest data points (neighbours) to x:

where I is the indicator function.

(a)  [5 marks]  Write  a  function,   called  classify_point,   that  classifies  a  new  observation x ac- cording  to  the k-nearest  neighbours  rule  in  Equation   (2)  given  a  set  of  training  observations (x1 , y1 ), (x2 , y2 ), . . . , (xn , yn ) and a user-specified distance function f. The classify_point function

should have the following features: Arguments:

1. x: a numeric vector of length p, giving the new observation x ∈ Rp  that is to be classified.

2. training_data:  a numeric matrix with n columns and p + 1 rows, consisting of training data. Each column corresponds to an observation (xi , yi ).  The first p rows contain the p variables from the n vectors x1 , . . . , xn. The last row contains entries equal to either 1 or 2, that depicts which of the two classes the observation belongs to.

3. k: a single numeric value, a positive integer k representing how many nearest neighbours to use.

4.  dist_func:  a function object, giving the distance function f to use as in Equation  (1), that will be provided by the user.  You do not need to create your own distance function, but you should assume that dist_func has two arguments, a and b, representing the two observations whose distance is being computed.  For example, for 1-dimensional data, one possible choice is dist_func  =  function(a,  b){abs(a  -  b)}, the absolute value of the difference between a and b.

Computation:

The function should compute the ordered distances with respect to a new observation x as given in Equation (1). Then, the function should compute the predicted class of x according to Equation (2).

If there is no majority class, i.e. if k is an even number and Σi(k)=1 I(y(i)  = 1) = Σi(k)=1 I(y(i)  = 2) = k/2, then x should be predicted as belonging to the class of the (k + 1)-th nearest neighbour instead.

Return:

• predicted_class: a single numeric value, equal to either 1 or 2, giving the predicted class of the new observation x.

(b)  [2  marks]  Write  a  function,  called  classify_data,  that  classifies  a  new  set  of  m  observations x(1) , x(2) . . . , x(m)   according to the  k-nearest  neighbours  rule  given  a  set  of training  observations (x1 , y1 ), (x2 , y2 ), . . . , (xn , yn ).   Your function should call the function you wrote in part  (a) where appropriate. The classify_data function should have the following features: Arguments:

1. test_data: a numeric matrix with m columns and p rows, giving the new observations {x(i)

that are to be classified.

2. training_data:  a numeric matrix with n columns and p + 1 rows, consisting of training data. The argument has the same specifications as in part (a).

3. k: a single numeric value, a positive integer k representing how many nearest neighbours to use. The argument has the same specifications as in part (a).

4.  dist_func:  a  function object, giving the distance function  f to use as in Equation  (1).   The argument has the same specifications as in part (a).

Computation:

The function should classify each of the m observations in test_data as belonging to the class 1 or 2, using the classify_obs function that you wrote in part (a).

Return:

• predicted_classes: a numeric vector of length m, with entries equal to either 1 or 2, whose i-th entry corresponds to the predicted class (i)  of the new observation x(i) .

(c)  [4 marks] Import the data sets ion_train .txt and ion_test .txt into your R workspace into vari- ables named ion_train and ion_test respectively.  Using the training data set, compute the pre- dicted classes from the test data set for k  ∈  {1, 2, . . . , 13}, using the Euclidean distance f (a, b) =

√Σi(p)=1 (ai − bi )2 .  Store the predicted classes in a data frame. object predicted_classes of dimen-

sions m × 13, where m is the number of new observations to predict, and where the columns consist of the predictions for the 13 different values of k.

(d)  [3 marks] By comparing the predicted classes (1) , (2) , . . . , (m)  to the true classes y (1) , y (2) , . . . , y (m) , a 2 × 2 confusion matrix C can be computed with entries given by:

1 ≤ i, j ≤ 2. (3)

Write a function, called  calc_conf_mat, that calculates the confusion matrix C for a given set of predicted classes (1) , (2) , . . . , (m)  and true classes y (1) , y (2) , . . . , y (m) .  The calc_conf_mat function should have the following features:

Arguments:

1. predicted_classes:  a numeric vector of length m, giving the values of the predicted classes (1) , (2) , . . . , (m) .

2. true_classes:     a   numeric   vector   of  length   m,   giving   the   values   of   the   true   classes y (1) , y (2) , . . . , y (m) .

Computation:

The function should compute the 2×2 confusion matrix C given in Equation (3). The confusion matrix should have meaningful row and column names distinguishing the entries of the matrix.

Return:

conf_mat: a matrix object, giving the 2 × 2 confusion matrix C given in Equation (3).

(e)  [3 marks] Further analysis by the scientists finds that the first  15 observations (i.e. those in columns 1–15) in the ion_test data set belong to class 1, whilst the last 15 observations (those in columns 16–30) belong to class 2.  Using the calc_conf_mat function you wrote in part (d), plot the proportion of incorrectly classified data points for the classifications computed in part (c) over the given range of k ∈ {1, 2, . . . , 13}.

(f)  [3 marks] Run the classify_data function on the test data set with k = 13 for the following 3 distance functions:

Which  distance  function  yields  the  highest  proportion  of  correctly  classified  data  points  for  the ion_test data? Store the name of the function ( "f1", "f2", or "f3") in a variable called best_func.

(g)  [4 marks] Using the predicted classes from the classification in part (f) that yielded the highest pro- portion of correctly classified points, plot dimensions 6 and 7 of the ion_test data on a scatter plot, with the two (true) classes distinguished from one another by colour, and with incorrectly classified points given by cross (x) symbols.

Hint:  Several of the data points have identical values.  To better visualise the data, use the  jitter function to add random noise to the data.

(h)  [3 marks] In this question, you will write a function, called classify_data2, that improves upon the function classify_data that you wrote in part (b), by including checks to ensure that some of the arguments passed to the function satisfy certain requirements.  First, copy and paste the code you wrote for part (b) into your answer for part (h), and rename the function name to classify_data2 in part (h).

The function classify_data2 should check that the arguments satisfy the following three require- ments:

1.  The last row of training_data should only contain numeric values equal to 1 or 2.

2.  The dimension of observations in test_data and training_data match up, i.e. the number of rows of test_data should be 1 less than the number of rows of training_data.

3.  The argument dist_func should be a function object.

If invalid inputs are passed to this function, it should stop prematurely by using the appropriate R function and print out the associated relevant error message exactly as written below:

1.  Last  row  of  training_data  should  only  contain  numeric  values  equal  to  1  or  2 .

2. Dimensions  of  test_data  and  training_data  do  not  agree .

3. Argument  dist_func  should  be  a  function  object .

For example, if requirement 2 is not satisfied, then the function should stop and print the error message 2         

Delphi 13.2控件之msquic4d.rar 立即下载

相关推荐

openworker(Python)

「openworker(Python)」是开源项目(Python)。源码完整,下载解压即可查看使用,适合学习参考、课程设计与二次开发。

【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c

AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。

freewebsys的专栏 658

Rosenbrock 优化实验:GD、PSO 与 GA 的收敛对比matlab代码.rar

Rosenbrock 优化实验:GD、PSO 与 GA 的收敛对比matlab代码.rar

PSO-LSTM基于PSO优化LSTM网络的电力负荷预测(Python代码实现)

内容概要:本文提出了一种基于粒子群优化算法(PSO)优化长短期记忆网络(LSTM)的电力负荷预测方法,并通过Python代码实现了完整的模型构建与仿真验证。该方法利用PSO算法全局寻优的能力,自动优化LSTM网络的关键超参数,如学习率、隐含层节点数、训练迭代次数等,从而克服传统LSTM依赖人工调参导致的预测精度不高和收敛速度慢的问题。文中详细阐述了PSO-LSTM混合模型的架构设计、算法流程及其实现细节,结合实际电力负荷数据进行了实验验证,结果表明该模型在预测精度、稳定性与泛化能力方面均优于标准LSTM及其他传统预测模型,尤其适用于短期电力负荷预测任务。; 适合人群:具备一定Python编程基础和机器学习理论知识,从事电力系统分析、能源管理、智能电网调度及相关领域研究的研发人员、工程技术人员及高校研究生。; 使用场景及目标:①应用于电力系统短期负荷预测,提升电网运行调度的科学性与经济性;②为能源管理系统提供高精度负荷数据支持,优化发电计划与资源配置;③作为智能优化算法与深度学习融合的教学案例,帮助学习者掌握PSO与LSTM协同建模的方法与实践技巧;④为后续研究提供可复现的代码基础和技术参考。; 阅读建议:建议读者结合提供的Python代码,动手复现整个建模与训练过程,深入理解PSO优化机制与LSTM网络结构的耦合方式,并尝试在不同时间尺度和负荷场景的数据集上进行迁移测试,以全面评估模型的适应性与鲁棒性。

STM32 Modbus RTU 主站项目实战-多从站轮询、超时重试与断线自恢复,一个能长期跑的主站调度器

多从站轮询、超时重试与断线自恢复,一个能长期跑的主站调度器。适用:STM32F103C8T6 + 标准外设库,RS485 半双工总线,下挂变频器、电表、温控器。19 步完整工程 · 主站状态机 · 调度表 · 寄存器镜像双缓冲 · 断线降频重试 · 18 例故障速查。v1.0 · 嵌入式工程实战教程。从站是应答方,主站是发起方;发起方一旦没有调度,总线就会僵住。单从站能跑通,多从站就乱:谁先发、发完等多久、超时怎么退、某一个站掉线会不会拖死整条总线。答案不在协议里,在一个按时间戳推进的主站调度器里——本教程从空工程写到能长期运行

数字政府政务服务AI大模型赋能智能体平台及AI场景应用规划方案(决策评审版).pptx

数字政府政务服务AI大模型赋能智能体平台及AI场景应用规划方案(决策评审版).pptx

基于粒子群优化算法的三方三层的主从博弈能源系统优化模型研究(Matlab代码实现)

内容概要:本文研究了基于粒子群优化算法的三方三层主从博弈能源系统优化模型,旨在通过Matlab代码实现对包含风、光、火、储等多种能源形式的综合能源系统进行优化调度。该模型构建了包含能源供应商、运营商与用户三类主体的多层次博弈架构,引入主从博弈机制,将不同参与者划分为领导者与跟随者角色,并在不完全信息环境下采用Epsilon纳什均衡策略实现多方利益协调。结合多目标粒子群优化算法,有效解决了系统运行成本、峰谷差与碳排放等多重目标间的权衡问题。研究进一步整合了需求响应与电能转气(P2G)等灵活性资源,提升了系统调节能力,并通过IEEE39等标准系统进行潮流计算与电能质量分析,验证了模型在提升综合能源系统经济性、稳定性与环保性方面的有效性。; 适合人群:具备电力系统、优化算法及博弈论基础知识的科研人员与研究生;从事能源系统优化、智能调度及相关领域研究的专业技术人员;有志于复现高水平期刊论文成果并开展创新性研究的硕博生。; 使用场景及目标:① 学习并掌握主从博弈在综合能源系统中的建模方法与求解流程;② 理解多目标粒子群算法在复杂能源调度问题中的应用技巧;③ 掌握需求响应、P2G等灵活性资源在系统优化中的集成方式;④ 借助Matlab代码复现IEEE39系统的潮流计算与电能质量分析过程,支撑科研项目或学术论文撰写。; 阅读建议:本资源以Matlab代码为核心载体,强调理论建模与仿真实践的深度融合。建议读者在学习过程中结合博弈论与智能优化算法的基础理论,逐步调试代码并分析关键参数的影响,重点关注Epsilon纳什均衡的实现逻辑与多目标优化的收敛特性,从而深入理解能源系统协同优化的内在机制。

T18_低空经济示范区十五五通感一体化低空智联网与飞行服务保障体系设计方案_生态合作版.pptx

T18_低空经济示范区十五五通感一体化低空智联网与飞行服务保障体系设计方案_生态合作版.pptx

复现基于全局积分滑模控制(GISMC)的欠驱动自主水下航行器(AUV)水平轨迹跟踪控制研究(Simulink仿真、Matlab代码实现)

内容概要:本文研究了基于全局积分滑模控制(GISMC)的欠驱动自主水下航行器(AUV)水平轨迹跟踪控制方法,通过Simulink仿真与Matlab代码实现对该控制策略进行复现与验证。针对欠驱动AUV系统存在的模型不确定性与外部干扰问题,设计了全局积分滑模控制器,有效提升了轨迹跟踪精度与系统鲁棒性,克服了传统滑模控制存在的稳态误差与抖振问题。该控制器通过引入积分项增强了对持续干扰的抑制能力,并确保系统在整个状态空间内实现渐近收敛。仿真结果表明,在复杂海洋环境下,所提方法能够实现对期望轨迹的高精度跟踪,具备优良的动态响应性能与抗干扰能力,适用于AUV在水平面内的精确导航与控制任务。; 适合人群:具备自动控制理论基础、海洋工程背景或从事无人系统控制研究的科研人员,以及熟悉Matlab/Simulink仿真工具的自动化、船舶与海洋工程等相关专业的研究生与工程师。; 使用场景及目标:①用于解决欠驱动AUV在未知扰动下的轨迹跟踪控制问题;②为滑模控制在非线性、强耦合系统中的应用提供仿真验证案例;③推动先进控制算法在水下机器人系统中的工程化实现。; 阅读建议:读者应结合Matlab代码与Simulink模型进行仿真操作,重点关注滑模面设计、控制律推导与参数整定过程,建议在复现基础上尝试引入不同干扰条件或优化控制结构,以深入理解GISMC的控制机理与鲁棒特性。

T04_城市生命线AI智能体平台及AI大模型应用场景规划方案_技术方案版.pptx

T04_城市生命线AI智能体平台及AI大模型应用场景规划方案_技术方案版.pptx

EPLAN自动成图与报表实战合集 API批量成图脚本+端子表电缆表自动生成

内容概要:EPLAN自动成图与报表自动生成实战合集,含2篇原创:API批量成图脚本骨架(对象模型+可运行C#代码+三个必踩坑+42页从3.5小时压到11分钟实测)、端子表/电缆表/部件清单报表自动生成(配置逻辑+翻车点+提效数据)。适用人群:电气设计工程师、成套厂制图员、EPLAN二次开发。使用场景:图纸批量生成提效、报表自动化。原创整理。

主动配电网故障恢复的重构与孤岛划分统一模型研究升级版本(Matlab代码实现)

内容概要:本文针对主动配电网在故障情况下的恢复问题,提出了一种网络重构与孤岛划分的统一优化模型,旨在通过协同优化配电网的拓扑结构与分布式电源形成的可控孤岛,最大限度恢复关键负荷供电,提升系统韧性。该模型充分考虑了分布式电源出力特性、负荷分级需求以及配电网辐射状运行等多重约束,构建了以负荷恢复最大化和网络损耗最小化为目标的混合整数非线性规划问题,并采用高效的优化算法进行求解。研究通过Matlab编程实现了完整的模型求解与仿真验证,结果表明所提方法能有效协调重构与孤岛策略,显著提高故障后的供电恢复能力和系统运行的稳定性。; 适合人群:具备电力系统分析、优化理论及Matlab编程基础,从事主动配电网、分布式能源集成、电网韧性提升或智能电网故障恢复等相关领域研究的研究生、科研人员及工程技术人员。; 使用场景及目标:①应用于高比例分布式电源接入的现代配电网故障应急处置与恢复决策;②为提升电网应对极端事件的能力提供先进的理论模型与技术方案;③通过Matlab代码复现与仿真,深入学习和掌握配电网重构、孤岛划分及综合优化的前沿算法。; 阅读建议:建议读者结合电力系统潮流计算、图论基础和优化建模知识进行学习,重点理解模型中目标函数的设计理念、各类物理约束(如潮流、辐射状、孤岛连通性)的数学表征方法,以及求解算法的实现逻辑。务必动手运行并调试所提供的Matlab代码,通过改变网络参数和故障场景来探究模型的适应性和性能边界。

威百威9000V6商业管理软件-210930稳定版本

支持扫码支付

塔式熔盐光热朗肯循环电站建模!并且搭建了Simulink模型!!

内容概要:本文详细介绍了塔式熔盐光热朗肯循环电站的建模过程,并基于Simulink搭建了相应的仿真模型,旨在对太阳能热发电系统进行动态仿真与性能分析。通过建立太阳能集热、熔盐传热、蒸汽朗肯循环及发电等关键环节的数学模型,实现对整个电站能量转换过程的精确模拟,为系统优化设计、控制策略研究及运行调度提供技术支持。该模型有助于提升清洁能源系统的仿真精度与研究效率。; 适合人群:从事新能源发电、电力系统仿真、热能工程及相关领域的研究人员、高校师生及工程技术人员。; 使用场景及目标:①用于塔式光热电站的系统级仿真与动态特性分析;②支撑热电联产、多能互补系统及综合能源系统优化调度研究;③为新型控制策略(如温度控制、功率调节)的验证提供平台; 阅读建议:此资源以Simulink仿真为核心,建议读者结合相关热力学与电力系统知识,逐步理解各模块建模原理,并通过调整参数进行仿真实验,深入掌握光热电站的运行机制与优化潜力。

旋转中心标定诊断工具(视觉标定失败定位+Kasa圆拟合)

机器视觉旋转中心标定失败诊断工具:Kasa圆拟合求旋转中心+四类失败原因自动定位(标定点共线/旋转角步集中/拟合残差大/像素机器人映射方向反),含README与示例数据,仅依赖numpy,源自真实产线客诉排查经验。

【微机电系统】基于SOI工艺的MEMS微镜芯片设计:3D视觉中激光扫描与点云生成的核心组件

内容概要:本文系统阐述了MEMS微镜芯片在机器3D视觉系统中的核心作用,将其类比为“微米级扫描瞳孔”,重点解析其在三维深度相机、激光雷达(LiDAR)、AR光机及光通信等场景中的工作原理与关键技术。文章从应用场景切入,深入剖析MEMS微镜的双轴谐振结构、驱动机制(静电/压电/电磁/电热)、扫描模式(光栅与李萨如)及闭环控制,并详细说明基于SOI晶圆的材料体系、深反应离子刻蚀(DRIE)与晶圆级真空封装工艺对性能的影响。进一步提出CMF(颜色-材料-表面处理)在芯片层面的转译逻辑,强调面形精度、反射率、动态形变与多物理场耦合的协同优化。最后针对四类典型应用场景构建差异化选型准则,指出镜面口径、扫描角与谐振频率之间存在强耦合硬约束,整机点云性能上限在芯片选型阶段即已确定。; 适合人群:从事光电系统、MEMS器件设计、自动驾驶感知硬件、工业视觉及微纳制造的研发工程师与技术人员,具备一定的光学、机械与材料基础知识。; 使用场景及目标:①理解MEMS微镜在3D视觉系统中的功能定位及其与替代技术(如机械转镜、Flash、OPA)的适配边界;②掌握器件从结构设计、材料工艺到封装测试的全流程关键技术与性能约束关系;③建立面向不同应用场景的科学选型方法论,避免因参数定义不清或单点优化导致系统级失败; 阅读建议:此资源兼具技术深度与工程实用性,建议结合图表(尤其是五幅核心工程图)与附录术语表进行精读,重点关注“工艺-性能”因果链与多目标冲突的权衡逻辑,在实际项目中应用于器件选型、系统集成与失效分析。

三相充电桩维也纳PFC+三电平LLC谐振变换器三电平PSIM仿真设计(Simulink仿真实现)

内容概要:本文围绕三相充电桩中采用的维也纳PFC(功率因数校正)与三电平LLC谐振变换器展开,重点研究其PSIM与Simulink仿真设计。核心内容涵盖维也纳PFC的双闭环PI控制策略、中点电位平衡控制、SVPWM调制技术的应用,以及三电平LLC谐振变换器的闭环控制设计。通过MATLAB/Simulink搭建仿真模型,验证了所提出的控制策略在稳定800V直流母线电压、实现上下电容电压均衡、降低输入电流THD方面的有效性。研究结果表明,基于电容电压差值补偿的中点平衡策略能显著提升系统输出品质,有效抑制中点电位漂移,同时SVPWM调制确保了良好的谐波性能,为中大功率充电桩的高性能控制提供了可行且高效的解决方案。; 适合人群:具备电力电子、自动控制理论基础,从事新能源汽车充电、电力变换器设计、工业电源开发等相关领域的研究生、科研人员及工程技术人员。; 使用场景及目标:①为三电平维也纳整流器的中点电位平衡问题提供一种基于SVPWM调制的软件解决方案;②为三相充电桩前端PFC与后端DC-DC两级变换器的协同仿真与控制设计提供参考实例;③服务于高校或企业的电力电子技术教学、课程设计及科研项目开发。; 阅读建议:此资源以科研论文形式呈现,包含详细的数学推导、控制框图和仿真结果分析。学习者应结合PSIM/Simulink仿真软件,动手复现文中模型,重点关注双闭环参数整定、SVPWM调制与中点平衡策略的协同机制,并尝试在不同工况下测试系统的动态响应与鲁棒性。

多目标粒子群算法求解综合能源系统最优容量配置研究(Matlab代码实现)

内容概要:本文研究了基于多目标粒子群算法(MOPSO)求解综合能源系统(IES)中最优容量配置的方法,并提供了完整的Matlab代码实现。研究旨在通过优化风电机组、光伏机组、燃气轮机、储能系统等多种能源设备的容量配置,实现系统在经济性、环保性和能源利用率等方面的多目标平衡。文中构建了综合能源系统容量配置的数学模型,明确了以最低综合成本、最小碳排放为核心的目标函数,以及能量供需平衡、设备出力能力等关键约束条件,并详细阐述了MOPSO算法的实现流程,包括种群初始化、非支配排序、拥挤距离计算和外部存档更新等核心机制。最后,通过Matlab平台的仿真实验验证了该方法的有效性,结果表明该算法能够生成分布均匀且具有良好多样性的Pareto最优解集,为决策者根据不同侧重点选择最终方案提供了科学依据。; 适合人群:具备一定电力系统、优化算法和Matlab编程基础的研究生、科研人员及工程技术人员。; 使用场景及目标:① 学习和掌握综合能源系统容量配置问题的建模方法;② 深入理解多目标粒子群算法(MOPSO)的核心原理及其在实际工程优化问题中的应用;③ 获取可直接运行和修改的Matlab代码,用于复现研究成果或进行二次开发。; 阅读建议:建议读者在阅读时,首先理解综合能源系统的背景和优化问题的数学建模过程,然后结合提供的Matlab代码,逐步跟踪算法的执行流程,重点关注目标函数和约束条件的代码实现,以及MOPSO算法中非支配排序和拥挤距离计算等核心模块。为了更好地掌握,可以尝试调整算例参数、增减优化目标或修改算法参数,观察结果的变化。

上一篇: MATH2000 Network Optimisation Test 1 Semester 2 2022Matlab
下一篇: CSCI235 – Database Systems 2024 S4 Implementation Task 1SPSS
priorityqueue3
博客等级 码龄2年 252粉丝 40原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值