墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
200+累计阅读
285平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
iOS ui基础控件
Rijndael密码算法
一 什么是Rijndael Rijndael是由比利时密码学家设计的分组密码算法，于2000年被选为新一代的标准密码算法——AES。今后会有越来越多的密码软件支持这种算法。 Rijndael的分组长度和密钥长度可以分别以32比特为单位在128比特和256比特的范围内进行选择。不过在AES的规格中，分组长度固定为128比特，密钥长度只有128、192和256比特三种。 二 Rijndael的加...
iOS BUG UIView转UIImage模糊失真
#UIScrollView内容转成UIIMageView方法。iOS BUG UIView转UIImage模糊失真。运行后发现，转换后的UIImage显示后会变模糊失真。##UIView转成Image。学习记录，每天不停进步。
1.深入浅出：理解三极管截止、放大和饱和状态！——参考《模拟电子技术基础》清华大学华成英主讲
幼儿园水平理解三极管截止、放大和饱和状态！书上看不懂，听课听不懂的过来！ 绕不开的三极管结构 以NPN为例，晶体三极管的结构，这是很多人不想看的，但是确实是非常重要的！不看结构是理解不了工作原理的！ （这样记忆：N是negative，负，代表多子为电子；P是positive，正，代表多子为空穴） 注意观察三极管的结构，有助于理解工作时的状态。 两张图结合起来看，略作解释： 1.图中空心为空穴带正...
iOS UIImageView，二维码图片处理，截屏生成局部图片
1.创建图形上下文 2.将view的layer渲染到图形上下文 3.从图形上下文得到图片 4.关闭图像上下文 #pragma mark - （方法）选择UIImageView所add的view上-即可绘制为包含view的新图片 - (void)cutView:(UIView *)view success:(void(^)(UIImage *image))success { ...
Windows: 深入剖析pip install SSLError与SSL模块缺失的根源及系统级修复
本文深入分析Windows系统下pip install SSLError与SSL模块缺失的根本原因，提供系统级修复方案。从Python安装包缺失SSL支持、OpenSSL库冲突到环境变量配置问题，详细讲解四大成因及对应的解决方案，包括重新安装Python、手动修复OpenSSL依赖等实用技巧，帮助开发者彻底解决HTTPS连接问题。
【实战】S7-PLCSIM Advanced V3.0 授权问题排查指南（Error Code:-30与LicenseNotFound深度解析）
本文深度解析S7-PLCSIM Advanced V3.0启动时遇到的Error Code:-30与LicenseNotFound报错问题。文章提供了一套系统性的排查指南，从检查WinPcap驱动兼容性、确保Automation License Manager服务运行，到正确安装浮动授权以及清理系统残留缓存，逐步解决授权链条中的各个环节故障，帮助用户彻底解决仿真环境启动失败的问题。
UIView转成UIImage
-(UIImage*)convertViewToImage:(UIView*)v{ UIGraphicsBeginImageContext(v.bounds.size); [v.layerrenderInContext:UIGraphicsGetCurrentContext()]; UIImage*image = UIGraphicsG
SAP Retail 补货里的 Requirement Groups，站点和商品太多时，主数据维护如何做减法
SAP Retail补货主数据设计中，Requirement Groups（需求组）是常被低估但至关重要的分类机制。它通过将具有相同补货需求的接收方（如门店）按商品分类（Merchandise Category）分组，大幅降低主数据维护量。在大型零售场景中（如800家门店、6万商品），直接维护每个门店和商品的组合参数会导致维护量失控。Requirement Groups允许企业按品类特性（如乳制品、饮料等）为不同门店组设置统一补货参数，并随业务变化灵活调整。该机制与商品分类紧密绑定，不同于MRP Group
UIview转换UIimage
1、将UIview转换UIimage；2、拼接两张图片为一张；- (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. UIImageView *test3= [[UIImageView a
基于 Simulink 的 PFC + LLC 级联系统联合仿真与优化实战教程
摘要：本教程详细介绍了2kW级AC-DC变换器建模方法，采用"BoostPFC+LLC谐振变换器"组合架构。重点解析了双级系统的核心控制策略：前级BoostPFC实现功率因数校正（PF>0.95），后级LLC通过变频调制(PFM)实现高效能量传输。教程包含四大关键步骤：PFC建模与控制、LLC参数计算与实现、母线电容优化设计以及系统联合调试，特别针对级联系统常见的母线电容震荡问题提供了解决方案。同时给出了仿真波形分析指南和避坑建议，包括代数环处理、仿真步长设置等实用技巧，为新能源车
深度学习在地质勘探中的应用：使用Python构建卷积神经网络进行地震数据分析
在本文中，我们介绍了如何利用深度学习技术，特别是卷积神经网络（CNN），来处理和分析地震数据。我们使用了Python编程语言和TensorFlow框架构建了一个CNN模型，并使用地震数据进行了训练和评估。在本文中，我们将探讨如何利用深度学习技术，特别是卷积神经网络（CNN），来处理和分析地震数据。首先，我们需要获取地震数据集。通过本文的介绍，希望您能对深度学习在地质勘探领域的应用有更深入的了解，并能够应用这些技术来解决实际问题。在准备好地震数据和构建CNN模型后，我们需要将数据分为训练集和测试集。
UIView换UIImage
// 把一个View视图转换为Image -(UIImage *)getImageFromView { UIView *redView = [[UIView alloc] initWithFrame:CGRectMake(0, 0, [[UIScreen mainScreen] bounds].size.width, 44)]; redView.backgroundColor =
霍尼韦尔SoftMaster使用说明
霍尼韦尔SoftMaster使用说明
ios UiView转换成UIImage
纯笔记类……希望喜欢：） #import + (UIImage *) imageWithView:(UIView *)view { UIGraphicsBeginImageContextWithOptions(view.bounds.size, view.opaque, 0.0); [view.layer renderInContext:UIGraphicsGetCurren
TMS_WebGMaps_1.9.8.0_Full_Source
TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder
jre9下载 jdk9
(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】
UIImage转换成UIView
#import <QuartzCore/QuartzCore.h>//记住要加上这个头文件！！！ - (UIImage*)convertViewToUIImage:(UIView*)v { UIGraphicsBeginImageContext(v.bounds.size); CGContextRef currentContext = UIGraphic...
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
iOS将UIView转换成UIImageView
-(UIImage*)UIViewToUIImageView:(UIView*)view{ CGSize size = view.bounds.size; // 下面的方法：第一个参数表示区域大小；第二个参数表示是否是非透明的如果需要显示半透明效果，需要传NO，否则传YES；第三个参数是屏幕密度 UIGraphicsBeginImageContextWithOptions(size,
iOS 将UIView控件转换成UIImage对象
源码地址：前去查看链接/** 将 UIView 转换成 UIImage @param view 将要转换的View @return 新生成的 UIImage 对象 */ - (UIImage *)yj_convertCreateImageWithUIView:(UIView *)view{ UIGraphicsBeginImageContext(view.bounds.size);
iOS巅峰之将UIView转换成UIImage
//-(UIImage*)convertViewToImage:(UIView*)v{ // // CGSize s = v.bounds.size; // NSLog(@"---%f", s.height); // // 下面方法，第一个参数表示区域大小。第二个参数表示是否是非透明的。如果需要显示半透明效果，需要传NO，否则传YES。第三个参数就
截屏实现，将UIView指定区域转换成图UIImage
在平常的开发中，会用到截屏过程，也就是将UIView指定区域转换成图片，下面就是实现代码： -(UIImage*) imageFromView:(UIView *) v rect:(CGRect) rect{ UIGraphicsBeginImageContextWithOptions(v.frame.size, NO, 1.0); //NO，YES 控制是否透明
uiview转换成uiimage
UIGraphicsBeginImageContext(currentView.bounds.size); [currentView.layer renderInContext:UIGraphicsGetCurrentContext()]; UIImage *viewImage = UIGraphicsGetImageFromCurrentImageContext();...
关于IOS UIView 中会知道路径转换成相片并保存到手机相册中
在uiviiew 中利用drawRect()绘制路径后，如何转成image呢,这里有方法： UIGraphicsBeginImageContext([self bounds].size); [[self layer] renderInContext:UIGraphicsGetCurrentContext()]; UIImage *myImage = UI
xib如何给UIView设置圆角，为何xib设置UIView边框颜色不显示
最近用xib创建view，遇到一些问题，记录下，希望可以帮到遇到同样问题的童鞋： xib为何设置UIView圆角不显示： 首先上图：  xib设置圆角只需要按照图中步骤添加对应Key Path 最常用的Key Path： layer.cornerRadius ，注意该 key 对应 Value 的 type 应该设置为 String/Number 两种类型均可(代码设置弧度为:thisView...
PDFGenerator：轻量级的Swift PDF解决方案
PDFGenerator：轻量级的Swift PDF解决方案 随着数字化时代的到来，PDF文档作为信息交换的标准格式，其重要性不言而喻。今天，我们将为大家介绍一款强大的开源工具——PDFGenerator，这是一款专为iOS开发者设计的Swift框架，旨在让PDF文件的生成变得简单易行。 项目介绍 PDFGenerator是一个简洁高效的Swift库，能够轻松将UIView、UIImage等元素转...
截图
-(UIImage *)getImageView{ UIGraphicsBeginImageContext(self.bounds.size); [self.layer renderInContext:UIGraphicsGetCurrentContext()]; UIImage *Img = UIGraphicsGetImageFromCurrent
IOS开发笔记之UIView转化为UIImage
最近在弄一个项目遇到了需要将UIView转化为UIImage。记录下。 最开始用的是下面的方法： UIGraphicsBeginImageContext(view.bounds.size); [view.layer renderInContext:UIGraphicsGetCurrentContext()]; UIImage *image = UIGraphicsGet
UIToolbar UINavigationController UINavigationBar UIBarButtonItem
转自: http://blog.youkuaiyun.com/ysy441088327/article/details/7626983 --------------------------------------------------------------------------------UIBarButtonItem---------------------------------
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
1万+
扫一扫
