解决加载arx时,出现非法异常的方案

This can happen when one of the MS Jet Database Engines DLL files (dao360.dll) is not registered at all or not registered correctly. I am not sure what might cause this to happen, but below are some steps that have corrected this issue in the past: 1) On the Start menu (Windows), click Run. 2) In the Run dialog box, enter CMD. Click OK. 3) In the command window, change to the C:/Program Files/Common Files/Microsoft Shared/DAO directory. This should be the location for the unregistered DLL. 4) At the Windows command prompt, enter: regsvr32 dao360.dll. You should receive the following message at the command prompt: DllRegisterServer in Dao360.dll succeeded If this operation fails, then the DLL is not located in that path and you need to search for it. You might need administrator rights or Power User Rights to register this DLL. Steve wrote in message news:5177908@discussion.autodesk.com... have a fresh install of AutoCAD Electrical 2007 and I get the following error message each time I launch the program: Exception in F:/Program Files/Autodesk/AutoCADe 2007/Acade/Wd_mdb.arx ARX Command Unhandled Exception E06D7363 (e06d7363h) at address 7C81EB33h Any help is greatly appreciated.

真正的步骤:
打开开始菜单->运行->cmd
cd C:/Program Files/Common Files/Microsoft Shared/DAO    回车           
 regsvr32 dao360.dll 回车
弹出一个成功注册的对话框就好了

这个问题同样适合于:在安装自定义软件时,在创建快捷方式时出错的问题,具体原因待探讨.